Minimum concave cost multicommodity network design

The minimum concave cost multicommodity network design problem (MCMNDP) arises in many application areas, such as transportation planning, energy distribution systems and especially in the design of both packet and circuit switching backbone networks. Exact concave cost optimization algorithms have been developed but they are applicable only if the network size is small. Therefore, MCMNDP is usually solved using non-exact iterative methods. In this paper, such heuristic techniques proposed within the context of circuit switching and packet switching network design are evaluated in detail. Following a comprehensive literature survey, Yaged’s linearization, Minoux’s greedy and Minoux’s accelerated greedy methods have been selected for the circuit switching network design case for further investigation. Minoux’s greedy methods are found to create routes that include cycles causing degradation in the quality of the solution; therefore, we propose a simple but effective modification scheme as a cycle elimination strategy. Similarly, but within the context of packet switching network design, Gerla and Kleinrock’s concave branch elimination, Gersht’s greedy, and Stacey’s concave link elimination methods have been selected for further investigation. All of these methods consider aggregate flows on each link, simultaneously re-routing more than one commodity in one step. In this paper, we propose an alternative disaggregate approach, where only one commodity is handled at a time. Our final proposal is the adaptation of the algorithms proposed for circuit switching network design to the packet switching case. Then an extensive comparative computational study is performed for a number of networks and cost structures to help establish the best method with respect to time and solution quality. Our computational results have shown that the performances of the MCMNDP algorithms heavily depend on the network type and the cost structure. The results have also revealed that our proposed modification to Minoux greedy to eliminate cycles leads to considerable improvements and our proposed disaggregate approach gives the best result in some networks with certain cost structures.     

THE EFFECT OF MATTALOPORHYRINS ON ASPHALT OXIDATION. II. THE EFFECT OF VANADYL CHELATES FOUND IN PETROLEUM

Four selected asphalts were blended with zero to five wt. percent of fractions rich in vamady cheltes prepared from two crude oils. The mixture was -coated in a teflon -support, and the whole was heated in an oven at. 113±2°C for 24 hours. The mixture then was analyzed for increases ketone, acid and anhydride functions.

in general, functions rich in vanady ponphyrims tended to promote asphalt oxidation, particularly as measured by increase in kentones. Corelation of vanadyl ponphyrim concentration with asphalt oxidation is observed to the direct only if asphalts are mixed with varying amounts of the same fraction derived from the same crude Possible reasons for this phenomenon are discussed in terms of oxidation susceptibility of aspha1ts, the importance of molecular associations, and the relative catalytic activities of metallaporphyrins and other metal chelates     

Formation of biogenic amines by Gram-negative rods isolated from fresh,spoiled, VP-packed and MAP-packed herring (<Emphasis Type="Italic">Clupea harengus</Emphasis>)

Bacterial strains (120) were isolated from fresh, spoiled, VP-packed and MAP-packed herring. Identified bacterial strains were investigated for their abilities to produce biogenic amines in histidine, lysine and ornithine decarboxylase broth by a rapid high-performance liquid chromatography (HPLC) method. The microflora of fresh herring was dominantly Pseudomonas (30%), Enterobacteriaceae (23.2%), Vibrio (13.3%) and Moraxella (13.3%) but, the microflora of herring stored in VP and MAP was dominated by species belonging to Vibrio (23.3%) and Moraxella (20%), which indicates that these packaging systems prevented the growth of Pseudomonas and Enterobacteriaceae. In a laboratory medium containing amino acid (histidine, ornithine and lysine), most of bacterial strains produced histamine, putrescine and cadaverine. The highest histidine decarboxylase activities were observed in Klebsiella oxytoca, Hafnia alvei and Proteus vulgaris which produced 396, 232 and 54 mg histamine/L, respectively in histidine-enriched broth. The accumulation of cadaverine by Klebsiella oxytoca and Hafnia alvei was 325 and 208 mg/l, respectively. All strains isolated produced putrescine in an ornithine-enriched broth, ranging from 3 to 249 mg/l. The production of putrescine by Klebsiella oxytoca and Hafnia alvei was 249 and 195 mg/l, respectively. Moraxella spp and Acinetobacter spp did not produce histamine which indicates they did not have histidine decarboxylase activity.     

The use of nanophase powders for high Jc superconductor tape production

Advances in processing of superconductors has demonstrated that ceramic powders with exact composition, super-homogeneity, and extremely fine particle size can be prepared by chemical processing to achieve high density and uniform microstructure. The chemical processing routes have great advantage in preparing powder with high reactivity thus promoting solid state reactions required to produce ‘purer’ superconducting phase. We have studied extensively the coprecipitation technique for the preparation of superconducting ceramic powders. Chemical solution methods have been used in order to model several superconducting systems and to predict optimum conditions for obtaining exact composition. Several improvements on the control of precipitation reaction have been implemented in order to obtain powders of few nanometers in size. This has been done by carrying out the reaction in the bulk of a solution or in microemlusion systems. The corecipitated precursor powder has been used for production of 20− 30 meter long Ag-clad tapes. These tapes require considerably reduced processing times. By controlled heat treatment conditions, these tapes have been processed to carry transport critical current density, J_c <4 × 10⁴ A/cm² at 77K in zero applied field.     

Electronically tunable floating inductance simulator

In this letter, a new floating inductance simulator circuit is presented. The proposed structure consists of only one grounded capacitor without any external resistors and two different active elements. The active elements are dual-output current-controlled current conveyor (DO-CCCII) and operational transconductance amplifier (OTA). The proposed inductance simulator can be tuned electronically by changing the biasing current of the DO-CCCIIs or by changing the current of the OTA. Moreover, the circuit does not require any conditions of component matching. It has a good sensitivity performance with respect to tracking errors. As an application, the proposed inductance simulator is used to construct a fourth-order resistively terminated LC band-pass filter. The theoretical analysis is verified by the SPICE simulation results.     

Detecting and connecting disjoint sub-networks in wireless sensor and actor networks

Wireless sensor and actor networks (WSANs) can be considered as a combination of a sensor network and an actor network in which powerful and mobile actor nodes can perform application specific actions based on the received data from the sensors. As most of these actions are performed collaboratively among the actors, inter-actor connectivity is one of the desirable features of WSANs. In this paper, we propose a novel distributed algorithm for establishing a connected inter-actor network topology. Considering initially disjoint sets of actors, our algorithm first initiates a search process by using the underlying sensor network in order to detect the possible sub-networks of actors in the region. After these sub-networks are detected, our algorithm pursues a coordinated actor movement in order to connect the sub-networks and thus achieve inter-actor connectivity for all the actors. This coordinated movement approach exploits the minimum connected dominating set of each sub-network when picking the appropriate actor to move so that the connectivity of each sub-network is not violated. In addition, the approach strives to minimize the total travel distance of actors and the messaging cost on both sensors and actors in order to extend the lifetime of WSAN. We analytically study the performance of our algorithm. Extensive simulation experiments validate the analytical results and confirm the effectiveness of our approach.     

Non-isothermal degradation kinetics of poly (2,2′-dihydroxybiphenyl)

Catalytic oxidative polymerization of 2,2′-dihydroxybiphenyl (DHBP) was performed by using Schiff base polymer-Cu (II) complex and hydrogen peroxide as catalyst and oxidant, respectively. According to size exclusion chromatography (SEC) analysis, the number-average molecular weight (M _n), weight-average molecular weight (M _w) and polydispersity index (PDI) values of poly (2,2′-dihydroxybiphenyl) (PDHBP) were found to be 37,500, 90,000 g mol⁻¹ and 2.4, respectively. The thermal degradation kinetics was investigated by thermogravimetric analysis in dynamic nitrogen atmosphere at four different heating rates: 5, 10, 15 and 20 °C min⁻¹. The derivative thermogravimetry curves of PDHBP showed that its thermal degradation process had one weight-loss step. The apparent activation energies of thermal decomposition for PDHBP as determined by Tang, Flynn–Wall–Ozawa (FWO), Kissenger–Akahira–Sunose (KAS), Coats–Redfern (CR) and Invariant kinetic parameter (IKP) methods were 109.1, 109.0, 110.0, 108.4 and 109.8 kJ mol⁻¹, respectively. The mechanism function and pre-exponential factor were determined by master plots and Criado–Malek–Ortega method. The most likely decomposition process was a D _n Deceleration type in terms of the CR, master plots and Criado–Malek–Ortega results.     

Quantitative T 2 * assessment of acute and chronic myocardial ischemia/reperfusion injury in mice

Object

Imaging of myocardial infarct composition is essential to assess efficacy of emerging therapeutics. T ₂ ^* mapping has the potential to image myocardial hemorrhage and fibrosis by virtue of its short T ₂ ^* . We aimed to quantify T ₂ ^* in acute and chronic myocardial ischemia/reperfusion (I/R) injury in mice.

Materials and methods

I/R-injury was induced in C57BL/6 mice (n?=?9). Sham-operated mice (n?=?8) served as controls. MRI was performed at baseline, and 1, 7 and 28?days after surgery. MRI at 9.4?T consisted of Cine, T ₂ ^* mapping and late-gadolinium-enhancement (LGE). Mice (n?=?6) were histologically assessed for hemorrhage and collagen in the fibrotic scar.

Results

Baseline T ₂ ^* values were 17.1?±?2.0?ms. At day 1, LGE displayed a homogeneous infarct enhancement. T ₂ ^* in infarct (12.0?±?1.1?ms) and remote myocardium (13.9?±?0.8?ms) was lower than at baseline. On days 7 and 28, LGE was heterogeneous. T ₂ ^* in the infarct decreased to 7.9?±?0.7 and 6.4?±?0.7?ms, whereas T ₂ ^* values in the remote myocardium were 14.2?±?1.1 and 15.6?±?1.0?ms. Histology revealed deposition of iron and collagen in parallel with decreased T ₂ ^* .

Conclusion

T ₂ ^* values are dynamic during infarct development and decrease significantly during scar maturation. In the acute phase, T ₂ ^* values in infarcted myocardium differ significantly from those in the chronic phase. T ₂ ^* mapping was able to confirm the presence of a chronic infarction in cases where LGE was inconclusive. Hence, T ₂ ^* may be used to discriminate between acute and chronic infarctions.     

All‐pass sections with rich cascadability and IC realization suitability

In this paper, two new circuit configurations for realizing voltage‐mode (VM) all‐pass sections (APSs) are presented. The proposed circuits employ only two differential voltage current conveyors (DVCCs) and are cascadable with other VM circuits due to their high‐input and low‐output impedances. The first configuration uses a grounded resistor and a grounded capacitor without requiring matching constraints, whereas the second employs two grounded resistors and a grounded capacitor with a single matching condition. While the first configuration can realize only one all‐pass response, the second can provide inverting and non‐inverting all‐pass responses with selection of appropriate input port. Adding two grounded resistors to the proposed filters, variable gain APSs can also be obtained. As applications, two quadrature oscillators, each of which using one of the proposed all‐pass circuits, one grounded resistor and one grounded capacitor are presented. SPICE simulation results are included to verify the theory. Copyright © 2010 John Wiley & Sons, Ltd.     

Control of Aspergillus flavus with essential oil and methanol extract of Satureja hortensis

The essential oil and methanol extract of Satureja hortensis were tested for antifungal activity against Aspergillus flavus in vitro on Petri plates and liquid culture, and under storage conditions. The oil showed strong antifungal activity based on the inhibition zone and minimal inhibitory concentration values against the pathogen on Petri plates assays. The very low concentrations of them also reduced wet and dry mycelium weight of pathogen fungus in liquid culture. When the oils at 25, 12.5 and 6.25 microl/mL concentrations were applied to lemon fruits before seven days of pathogen inoculation on storage conditions, the decay on fruits caused by the pathogen could be prevented completely. The results in this study showed that the essential oil of S. hortensis had strong antifungal activity against pathogen fungi tested. So, the essential oil of S. hortensis could be used for management of this pathogen as a potential source of sustainable eco-friendly botanical fungicides.