Analysis on the effect of operating conditions on electrochemical conversion of carbon dioxide to formic acid

Electrochemical reduction of CO₂ to HCOOH was performed on a Sn electrode using a proton exchange membrane-embedded electrolysis cell. The effects of reaction conditions such as catholyte and anolyte types, reduction potential, catholyte pH, and reaction temperature on the amount of HCOOH and its faradaic efficiency were investigated. Four different electrolytes (KOH, KHCO₃, KCl, KHSO₄) were chosen as the candidate catholyte and anolyte; the most suitable electrolyte was chosen by monitoring the amount of HCOOH and faradaic efficiency. The effect of the pH of the selected catholyte on the conversion of CO₂ to HCOOH was also investigated. In addition, the reaction temperature was varied and its effect was studied. From the observations made, we determined the optimal reaction conditions for the production of HCOOH via the electrochemical reduction of CO₂ by a systematic approach.     

Comparison of the antimicrobial and antioxidant activities of selected wheat varieties

Antibacterial and antioxidant activities of wheat seed ethyl acetate extracts for Jokyoung (JK), Dark northern spring (DNS), Keumkang (KK), Woori (WR), and Winter wheat (WW) were investigated. Antibacterial activities were evaluated in vitro against the common food and cosmetic industry contaminants Escherichia coli, Salmonella typhimurium, and Staphylococcus aureus using well diffusion assays. WW had the highest inhibitory activity against all tested strains, with S. aureus being the most sensitive strain. The minimum inhibitory concentration (MIC) values of WW and WR against S. aureus were 0.50 and 1.25 mg/mL, respectively. The 2,6-dimethoxy-1,4- benzoquinone (DMBQ) content was measured using HPLC. The antibacterial activities of wheat seed extracts were correlated with the total phenolic contents (Pearson’s correlation coefficient=0.994), with the ABTS radical scavenging activity (0.978), and with the DMBQ content (0.968). WW and WR have potential for use as natural antimicrobials for prevention of food and cosmetics spoilage.     

接触面陷阱密度对a-InSnZnO薄膜晶体管器件电气性能的影响研究

We reported the influence of interface trap density（Nt） on the electrical properties of amorphous InSnZnO based thin-film transistors,which were fabricated at different direct-current（DC） magnetron sputtering powers.The device with the smallest N_t of 5.68×10¹¹ cm^-2 and low resistivity of 1.21×10^-3Ω·cm exhibited a turn-on voltage(V_ON) of-3.60 V,a sub-threshold swing（S.S） of 0.16 V/dec and an on-off ratio(I_ON/I_OFF) of⁸ x 108.With increasing N_t,the V_ON,S.S and I_ON/I_OFF were suppressed to-9.40 V,0.24 V/dec and 2.59×10⁸,respectively.The V_TH shift under negative gate bias stress has also been estimated to investigate the electrical stability of the devices.The result showed that the reduction in N_t contributes to an improvement in the electrical properties and stability.     

A novel method of making PVF porous foam without using the pore forming agent

Different with the conventional method of manufacturing poly(vinyl formal) (PVF) porous foam by using the pore‐forming agents such as wheat or potato starches, a novel method without using the pore‐forming agent is introduced in this article. Through the help of images taken by a scanning electron microscope, the formation process of the present PVF foam will be discussed in terms of the spinodal decomposition (SD) phase separation principle. Additionally, the effect of poly(vinyl alcohol) concentration and reaction temperature on the pore structure of the PVF foam will be investigated. Moreover, the water adsorption capacities of the PVF foams obtained by the present method will be studied in details through the analyses of pore‐size distribution, mechanical modulus, and thermal property. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41270.     

Preparation of dual‐layer acetylated methyl cellulose hollow fiber membranes via co‐extrusion using thermally induced phase separation and non‐solvent induced phase separation methods

Dual‐layer acetylated methyl cellulose (AMC) hollow fiber membranes were prepared by coupling the thermally induced phase separation (TIPS) and non‐solvent induced phase separation (NIPS) methods through a co‐extrusion process. The TIPS layer was optimized by investigating the effects of coagulant composition on morphology and tensile strength. The solvent in the aqueous coagulation bath caused both delayed liquid–liquid demixing and decreased polymer concentration at the membrane surface, leading to porous structure. The addition of an additive (triethylene glycol, (TEG)) to the NIPS solution resolved the adhesion instability problem of the TIPS and NIPS layers, which occurred due to the different phase separation rates. The dual‐layer AMC membrane showed good mechanical strength and performance. Comparison of the fouling resistance of the AMC membranes with dual‐layer polyvinylidene fluoride (PVDF) hollow fiber membranes fabricated with the same method revealed less fouling of the AMC than the PVDF hollow fiber membrane. This study demonstrated that a dual‐layer AMC membrane with good mechanical strength, performance, and fouling resistance can be successfully fabricated by a one‐step process of TIPS and NIPS. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42715.     

Enforcement avoidance behavior near automated speed enforcement areas in Korean expressways

Automated speed enforcement system (ASES) has been deployed as a safety countermeasure on Korean roadways to reduce speeding-related traffic crashes; information on ASES locations is mandated to be open to the public. However, because drivers are alerted about enforcement via on-board navigation systems and roadside signs, they can avoid enforcement by momentarily reducing their speeds near ASES locations. This enforcement avoidance behavior (EAB) can induce sudden changes in speed near the enforcement locations and thereby increase risk of crash occurrence.     

Preparation and characterization of carbon-encapsulated iron nanoparticles and their catalytic activity in the hydrogenation of levulinic acid

This study describes the synthesis of carbon-encapsulated iron nanoparticles using an ultrasonic method and also investigates their catalytic activity. These nanoparticles have been prepared using ultrasonic irradiation followed by annealing at various temperatures. As the annealing temperature of as-prepared α-Fe₂O₃ nanoparticles increased, the sample transformed into γ-Fe₂O₃, Fe₃O₄, and Fe nanoparticles via the reduction process without requiring any additional reducing agents such as H₂ gas, thus, creating a carbon shell surrounding the nanoparticles. By controlling the experimental conditions, Fe nanoparticles of various sizes can be formed with diameters in the range 100–800 nm; these nanoparticles are tightly encapsulated by 20-nm-thick carbon shells. Because of their high saturation magnetization 212 emu g^?1, the carbon-encapsulated Fe nanoparticles can be used for magnetic resonance imaging with a dramatically enhanced efficiency compared to commercially available T ₂ contrast agents. Moreover, the carbon-encapsulated Fe nanoparticles showed its superior catalytic activity and reusability for the hydrogenation of biomass-derived levulinic acid to GVL (99.6 %) in liquid phase.     

Visualization Approaches for Evaluating Ridge Regression Estimators in Mixture and Mixture‐Process Experiments

When the component proportions in mixture experiments are restricted by lower and upper bounds, the input space of a designed experiment space can become an irregular region that can induce multicollinearity problems when estimating the component proportion parameters. Thus, ridge regression provides a beneficial means of stabilizing the coefficient estimates in the fitted model. Previous research has focused on using prediction variance as a metric for determining an appropriate value of the ridge constant, k. We use visualization techniques to illustrate and evaluate ridge regression estimators and the robustness of estimation with respect to the variance and the bias. The addition of bias allows better balancing between the stability of the estimators and minimally changing the estimates. We illustrate the graphical methods with mixture and mixture‐process examples from the literature. Copyright © 2014 John Wiley & Sons, Ltd.