构造作用对油气生成和运聚的影响

有机质从埋藏开始，就处于极其复杂的地球物理化学场中，环境提的能量，一是热量，二是机械能，机械能，主要是通过机械力作用传递给系统的，另外还以机械波的形式赋予系统一定的机械能。当发生断褶构造运动时，机械力对油气运移的影响尤为突出，它经能量的迁移转化，促成了包括机械力降解和地应力驱动等一系列的连锁反应，制造了一次次高效的成油（生运）事件，本文以突变论为着眼点，按照改造控制建造的思路，大胆提出构造运动制造生排烃事件，成就含油气系统的假说。     

MODELING OF WATER DYNAMICS AND POLLUTANT SPREADING IN THE LUOMAHU RESERVOIR FOR WATER TRANSFER FORM SOUTH TO NORTH OF CHINA

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＷａｔｅｒＴｒａｎｓｆｅｒＦｒｏｍＳｏｕｔｈＴｏＮｏｒｔｈＰｒｏｊｅｃｔ(ＷＴＦＳＴＮＰ)ｉｓａｇｒｅａｔｄｅｃｉｓｉｏｎｔｏｓｏｌｖｅｔｈｅｐｒｏｂｌｅｍｏｆｗａｔｅｒｓｈｏｒｔａｇｅｉｎｔｈｅｎｏｒｔｈａｎｄｃｅｎｔｒａｌｐａｒｔｓｏｆＣｈｉ ｎａ .Ｔｈｉｓｐｒｏｊｅｃｔ ,ｉｎｃｌｕｄｉｎｇＥａｓｔ ,Ｃｅｎｔｒａｌ ａｎｄＷｅｓｔ Ｌｉｎｅ ,ｗｉｌｌｄｒａｗｗａｔｅｒｆｒｏｍｔｈｅＹａｎｇｔｚｅＲｉｖｅｒｔｏｔｈｅｎｏｒｔｈａｎｄｃｅｎｔｅｒｏｆＣｈｉｎａｓｏｔｈａ…     

激光导向伺服系统中满意PID调节器的LMI设计

利用带有图像处理功能的小型激光导向伺服系统,可以大大降低目标坐标测定仪操作手跟踪动态飞行目标的操作难度,从而提高激光回波率.与经典的矩阵分解方法不同,本文以线性矩阵不等式方法,研究了激光导向伺服系统的满意PID调节器设计问题.首先从约束指标的相容性出发,给出满足与给定圆形极点约束相容的输出方差的取值范围.然后,在此取值范围内,得到了求取同时满足上述两种约束的PID调节器参数的方法.靶场试验结果证明了其有效性.     

The Synthesis of Sulfated Titanium Oxide Nanotubes

TiO₂ nanotubes can be prepared in gram quantities by treating anatase TiO₂ powder with concentrated NaOH solution. These TiO₂ nanotubes acquired strong acidity after being impregnated with sulfuric acid solution and calcined at 300 °C. The anatase TiO₂ powder used to prepare the nanotube did not catalyze the esterification between cyclohexanol and acetic acid, while sulfated TiO₂ nanotubes were very reactive toward the esterification reaction.     

Improvement of RCA transistor using RTA annealing after theformation of interfacial oxide

A polysilicon emitter RCA transistor (an ultra-thin interfacial oxide layer exists between polysilicon and silicon emitter) is presented which can operate at 77 K for the first time. An ultra-thin (1.5 nm) interfacial oxide layer is grown deliberately between polysilicon and silicon emitter using RCA oxidation and excellent device stability is obtained after rapid thermal annealing (RTA) treatment in nitrogen atmosphere. The RCA transistor exhibits good electrical performance at very low temperature for an emitter area of 3 × 8 μm². The maximum toggle frequency of a 1:2 static divider is 1.2 GHz and 732 MHz at 300 K and 77 K, respectively     

轧机主传动万向联轴器辊端接头结构探讨

分析了衬板槽平面与叉头十字轴孔轴线的相对位置对辊端接头应力的影响 ,研究了轧辊扁头与衬板之间间隙所产生的冲击和应力集中 ,讨论了辊端接头中部过渡段结构对应力分布和制造质量的影响。提出辊端接头结构设计的优化方案     

Set－up of a Pure Electron Plasma Device

An electron Penning-Malmberg trap,which can confine an electron column and provide a good platform to investigate the cross-filed transportation of strongly magnetized electron plasma ,has been set up.With the device,an electron plasma with a density of 10^7 cm^-3 can be confined for a relatively long time.The structure of the trap,electron source,as well as the way how th measure electron plasma density profile and velocity distrbustion are introduced in detail.     

长距离钢带传动的张紧机构设计与应用

比较了几种长距离传动方式的特点与适用场合，重点探讨了实现长距离精密传动的技术要点。结合实际工程，完成了长距离钢带精密传动的应用，并指出张紧机构的设计与应用是钢带实现长距离精密传动的关键。为此文中对钢带传动的典型张紧机构进行了比较，并分析了这几类张紧机构的应用情况，有参考和应用价值。     

色用缓变光纤中交叉相位调制不稳定性分析

从非线性薛定谔方程出发得到了色散缓变光纤（DDF）中交叉相位调制（XPM）不稳定增益谱。研究了增益谱随入纤功率及光纤纵向色散参量的变化关系。结果表明：反常色散区的增益谱宽比正常色散区宽，且峰值增益高：DDF中XPM不稳定增益谱宽比常规光纤的宽，二者的比值随传输距离和光纤色散参量的乘积成指数增长；DDF的反常色散区是产生调制不稳定的较好的色散介质。     

纳米碳酸钙制备过程中添加剂作用机理探讨

采用鼓泡碳化法 ,在最佳反应温度、反应物浓度的条件下 ,考察了添加剂对产物形状及粒径大小的影响 ,得到了直径为 2 0～ 30nm、长径比在 2 0左右且分散性能良好的针状纳米碳酸钙 ,并对添加剂作用机理进行了分析。