MPRN多播数据可靠传送协议的设计与研究

在移动分组无线网环境中,多播路由协议起着非常重要的作用。由于MPRN受到节点移动和带宽的限制,已有多播路由协议的可靠性不高。文章提出基于Gossip的传输协议(GBTP),旨在提高多播路由协议的数据分组递交率。在MFGRP上进行了GBTP的模拟和性能分析,研究了GBTP对分组递交成功率的影响。仿真实验显示GBTP协议可以有效地提高MFGRP协议的分组递交率。     

一种基于CCM构件模型的计算网格平台

如何聚合网络中分布异构的计算资源来解决大规模的科学计算问题,和如何减少并行程序设计的复杂性,一直是网格计算研究的难点之一。文章提出了一种基于CORBA构件技术的计算网格新思想,构造了一个计算网格的模型(CCGM)。该模型能够充分地利用构件技术带来的可组装和易管理的特性来形成网格计算。并通过问题的抽象定义和使用ParIDL工具将问题的定义映射到CCGM之上,简化了计算网格应用的开发。通过测试和分析CCG(ComponentbasedComputationalGrid)系统,表明CCG系统具有较好的加速比。     

基于Web的网络拓扑图生成方法的研究和实现

针对网络管理系统中配置管理模块,提出基于简单网络管理协议的网络拓扑发现和优化显示算法,对在Linux环境下实现动态绘制网络拓扑图中遇到的问题进行了研究,同时给出实现算法的关键Java技术,生成基于Web的网络拓扑图。     

Benchmark solution of imperfect angle-ply laminated rectangular plates in cylindrical bending with surface piezoelectric layers as actuator and sensor

The static and dynamic responses of simply supported adaptive angle-ply laminates in cylindrical bending are considered. The interlaminar bonding of the host elastic laminate is assumed to be imperfect, described by a spring-layer model, while the bonding between the host elastic laminate and the surface piezoelectric actuator and sensor layers is perfect. The state-space approach, which is directly based on the three-dimensional exact elasticity (piezoelasticity) equations and very effective in analyzing laminated structures, is employed. The numerical results should provide a useful means of comparison in the development of simplified analyses or numerical methods.     

Simulation Study of Aspects of the Classical Hydrogen Atom Interacting with Electromagnetic Radiation: Elliptical Orbits

The present study examines the behavior of a classical charged point particle in near-elliptic orbits about an infinitely massive and oppositely charged nucleus, while acted upon by applied electromagnetic radiation. As recently shown for near-circular orbits, and now extended here to the elliptical case, rather surprising nonlinear dynamical effects are readily produced for this simple system. A broad range of stability-like conditions can be achieved by applying radiation to this classical atom. A perfect balance condition is examined, which requires an infinite number of plane waves representing harmonics of the orbital motion. By applying a scale factor to this radiation, stability-like conditions are produced where periodic variations in semimajor and semiminor axes occur for extended periods of time, before orbital decay eventually takes over due to the effects of radiation reaction. This work is expected to lead to both practical suggestions on experimental ideas involving controlling ionization and stabilization conditions, as well as hopefully aiding in theoretical explorations of stochastic electrodynamics.     

A very low energy compact electron beam ion trap for spectroscopic research in Shanghai

In this paper, a new compact low energy electron beam ion trap, SH-PermEBIT, is reported. This electron beam ion trap (EBIT) can operate in the electron energy range of 60-5000 eV, with a current density of up to 100 A/cm(2). The low energy limit of this machine sets the record among the reported works so far. The magnetic field in the central drift tube region of this EBIT is around 0.5 T, produced by permanent magnets and soft iron. The design of this EBIT allows adjustment of the electron gun's axial position in the fringe field of the central magnetic field. This turned out to be very important for optimizing the magnetic field in the region of the electron gun and particularly important for low electron beam energy operation, since the magnetic field strength is not tunable with permanent magnets. In this work, transmission of the electron beam as well as the upper limit of the electron beam width under several conditions are measured. Spectral results from test operation of this EBIT at the electron energies of 60, 315, 2800, and 4100 eV are also reported.     

Investigation of the Transition State in the Wear of Polyphenylene Sulfide Sliding Against Steel

The effect of sliding variables, including counterface roughness, sliding speed, and contact pressure, on the run-in state of wear and friction was studied. Sliding was performed in the pin-on-disk configuration with a polyphenylene sulfide (PPS) pin resting on the flat steel counterface. Some experiments were also run to study the effect of air cooling and heating. Optical microscopy and scanning electron microscopy were used to study the shape and size of the wear debris, worn pin surface, and the transfer film formed on steel counterfaces. It was found that friction and wear in the run-in state were significantly affected by the sliding variables studied and their influence was closely related to the development of a transfer film during the run-in state. If the transfer film developed during initial sliding, the coefficient of friction increased and wear rate decreased. The wear rate in the run-in state increased with the increase in initial counterface roughness and there was an optimal counterface roughness of 0.06 m Ra for minimum steady state wear rate. A higher applied load led to a higher wear rate in the run-in state but that was not the case with steady state wear rate.     

Determining the absolute efficiency of a delay line microchannel-plate detector using molecular dissociation

We present a method to measure the absolute detection efficiency of a delay-line microchannel-plate detector using the breakup of diatomic molecular ions. This method provides the absolute total detection efficiency, as well as the individual efficiency for each signal of the detector. The method is based on the fact that molecular breakup always yields two hits on the detector, but due to finite detection efficiency some of these events are recorded as single particles while others are detected in pairs. We demonstrate the method by evaluating the detection efficiency for both timing and position signals of a delay-line detector using laser-induced dissociation of molecular ions. In addition, the detection efficiency as a function of position has been determined by dividing the detector into sectors.     

Vibratory characteristics of flexural non-uniform Euler–Bernoulli beams carrying an arbitrary number of spring–mass systems

A new exact method for the analysis of free flexural vibrations of non-uniform multi-step Euler–Bernoulli beams carrying an arbitrary number of single-degree-of-freedom and two-degree-of-freedom spring–mass systems is presented in this paper. The closed-form solutions for free vibrations of non-uniform Euler–Bernoulli beams are derived for five important cases. Then, using the massless equivalent springs to replace the spring–mass systems and the fundamental solutions developed in this paper, the frequency equation for free flexural vibrations of a multi-step non-uniform beam with any kind of support configurations and carrying an arbitrary number of spring–mass systems can be conveniently established from a second-order determinant. The proposed method is computationally efficient due to the significant decrease in the determinant order as compared with previously developed procedures.     

An automatic method for identifying appropriate gradient magnitude for 3D boundary detection of confocal image stacks

Gradients play an important role in 2D image processing. Many edge detection algorithms are gradient‐based. We are interested in 3D boundary detection which can be considered as an extension of 2D edge detection in 3D space. In this paper, an algorithm to automatically and quantitatively measure the suitability of gradient magnitudes in detection of 3D boundary points of confocal image stacks is presented. A Measurement Function is defined to evaluate the suitability of each gradient magnitude chosen to be the threshold for 3D boundary detection. The application of Gauss's Divergence Theorem provides a solution to calculate the Measurement Function numerically. The gradient magnitude at which the maximum of the Measurement Function is achieved can be utilized as the most appropriate threshold for gradient‐based boundary detection and other operations like volume visualization.