Microhardness and Fracture Toughness Anisotropy in Cubic Zirconium Oxide Single Crystals

Vickers and Knoop indentation tests have been used to study the fracture and deformation characteristics of 9.4-mol%-Y₂O₃-stabilized ZrO₂ single crystals. K_c is anisotropic, with values of 1.9 and 1.1 MPa·m^1/2 for radial cracks propagating along (100) and (110), respectively. The toughness for these two orientations was also determined using the single-edge notched-beam geometry, and yielded values of 1.9 and 1.5 MPa·m^1/2.     

Alumina/Zirconia Micro/Nanocomposites: A New Material for Biomedical Applications With Superior Sliding Wear Resistance

In the present investigation, the sliding wear behavior is described for Al₂O₃/ZrO₂ micro/nanocomposites and monolithic alumina of similar grain size under defined conditions of a constant sliding speed and different loads (20–150 N). Nano ZrO₂ particles (1.7 vol%) were observed uniformly distributing throughout the composites, and most of them were located within the matrix alumina grains. The wear rate of the alumina and the micro/nanocomposites increased as the contact load increased and a clear transition in friction and wear behavior was observed in both materials. However, the nanocomposite wear resistance at low contact loads was one order of magnitude higher than that of the alumina. In the severe regime, no difference was observed among the materials. The low wear rate (10⁻⁷ mm³·(N·m)⁻¹) along with low pullout indicates higher wear resistance of micro/nanocomposites in the mild regime compared with monolithic alumina. Based on the morphological observation of worn surfaces by scanning electron microscope and on residual stress analysis performed by neutron diffraction, some wear mechanisms of Al₂O₃–ZrO₂ micro/nanocomposites are proposed. The high wear resistance of the nanocomposites is discussed in terms of fracture resistance properties and residual stress. Improvements in mechanical and tribological properties of these composites make them promising candidates for biomedical applications.     

Photopolymerizable multifunctional monomers and their evaluation as reactive Bis‐GMA eluents

Bis‐GMA {2,2‐bis[4‐(2′‐hydroxy‐3′‐methacryloyloxy‐propoxy)‐phenyl]‐propane}, TEGDMA <2‐{2‐[2‐(2‐methylprop‐2‐enoyloxy)ethoxy]ethoxy}ethyl‐2‐methylprop‐2‐enoate>, and methyl methacrylate (MMA) are some of the most commonly used monomers in the field of restorative dentistry. These compounds are characterized by having one or two terminal double bonds. Besides the effort to synthesize new monomers, several problems still affect the clinical behavior of contemporary dental materials. In this work, two monomers with three terminal double bonds, 5A13DA and 5A13DMA, were synthesized. Both monomers were used to completely replace TEGDMA as reactive diluent of photopolymerizable dental resin composites containing Bis‐GMA. The effects of 5A13DA and 5A13DMA on flexural properties, double bond conversion, water sorption, solubility, and polymerization shrinkage were evaluated. In addition, both monomers were evaluated as crosslinking agents for methylmethacrylate, resulting in copolymers with enhanced thermal stability. The results obtained suggest that newly synthesized monomers are potential substitutes for TEGDMA in the formulation of dental composites, providing 50% lower volumetric shrinkage than the composite resin used as control and adequate mechanical properties. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46240.     

Influence of ionic liquid composition on the stability of polyvinyl chloride‐based ionic liquid inclusion membranes in aqueous solution

Membrane technology has gained significant importance with the incorporation of ionic liquids into their structure. This work shows the influence of ionic liquid composition on the stability of PVC‐based polymer ionic liquid inclusion membranes (PILIMs) in aqueous solution. Among the ILs investigated, those membranes which contain between 20 and 30%_w/w of the least soluble, [OMIM⁺][PF₆^?] and [OMIM⁺][Ntf₂^?], exhibit losses of IL lower than 10%. For both ILs, the amount immobilized was maximum for the membranes with 30%_w/w of IL (0.0838 and 0.0832 g, respectively). On the contrary, the ionic liquid loss increases as its solubility in water increase, reaching 99.52% when PILIMs are prepared with 70%_w/w of [OMIM⁺][BF₄^?]. The results demonstrate that the stability of PILIMs depends on the solubility of the IL in the surrounding phase and the specific interaction between the IL and the polymeric support for PVC‐to‐IL ratios higher than 30%_w/w. © 2016 American Institute of Chemical Engineers AIChE J, 63: 770–780, 2017     

Effect of the drying process on the compressive strength and cell proliferation of hydroxyapatite‐derived scaffolds

The compressive strength and MC3T3 cell proliferation response of robocast hydroxyapatite‐derived scaffolds was evaluated for samples fabricated by conventional and freeze‐drying methods followed by sintering at 1100 or 1300°C. Both the sintering temperature and, especially, the drying method affected significantly the size and morphology of the residual microporosity within the robocast scaffold's struts. The freeze‐drying method generated a persistent large (1‐10 μm) microporosity of dendritic morphology that was found to improve the biological response of hydroxyapatite‐derived scaffolds. Conversely, conventional drying enhances the compressive strength of the structures. Strength was also increased at the higher sintering temperature, although at the expense of a poorer cell proliferation behavior. The results of this study suggest that the use of a freeze drying process after printing by robocasting provides a very appropriate method for enhancing the biological performance and reliability of bioceramic robocast scaffolds without severely reducing their compressive strength. And, thus, shows promise as an effective method to optimize the performance of robocast scaffolds for bone tissue regeneration.     

Alpha‐Synuclein Binds to the Inner Membrane of Mitochondria in an α‐Helical Conformation

The human alpha‐Synuclein (αS) protein is of significant interest because of its association with Parkinson's disease and related neurodegenerative disorders. The intrinsically disordered protein (140 amino acids) is characterized by the absence of a well‐defined structure in solution. It displays remarkable conformational flexibility upon macromolecular interactions, and can associate with mitochondrial membranes. Site‐directed spin‐labeling in combination with electron paramagnetic resonance spectroscopy enabled us to study the local binding properties of αS on artificial membranes (mimicking the inner and outer mitochondrial membranes), and to evaluate the importance of cardiolipin in this interaction. With pulsed, twofrequency, double‐electron electron paramagnetic resonance (DEER) approaches, we examined, to the best of our knowledge for the first time, the conformation of αS bound to isolated mitochondria.     

Bioinformatic Tools for the Analysis and Prediction of ncRNA Interactions

Noncoding RNAs (ncRNAs) play prominent roles in the regulation of gene expression via their interactions with other biological molecules such as proteins and nucleic acids. Although much of our knowledge about how these ncRNAs operate in different biological processes has been obtained from experimental findings, computational biology can also clearly substantially boost this knowledge by suggesting possible novel interactions of these ncRNAs with other molecules. Computational predictions are thus used as an alternative source of new insights through a process of mutual enrichment because the information obtained through experiments continuously feeds through into computational methods. The results of these predictions in turn shed light on possible interactions that are subsequently validated experimentally. This review describes the latest advances in databases, bioinformatic tools, and new in silico strategies that allow the establishment or prediction of biological interactions of ncRNAs, particularly miRNAs and lncRNAs. The ncRNA species described in this work have a special emphasis on those found in humans, but information on ncRNA of other species is also included.     

Toxoplasma gondii infection and food consumption: A systematic review and meta-analysis of case-controlled studies

ABSTRACT

Background: Toxoplasmosis is a zoonotic disease causing severe symptoms in pregnant women and immunocompromised individuals. On average, worldwide, around 30% of people are seropositive. The oral transmission route is of great significance and food, particularly meat, is an important transmission vehicle for T. gondii. However, the role of different food matrices is debated. Objectives: The aim of this review was to assess the risk of humans developing acute T. gondii infection via the foodborne route. Study eligibility criteria: Case-control studies including acute cases of T. gondii infection were included after literature searches, without time limits, in several databases. All studies estimating the risk of acquiring T. gondii infection after consumption of specific food categories were included. Results: Three risk factors proved to be significantly associated with acute T. gondii infection in humans: consumption of raw/undercooked meat, Odds Ratio (OR) 3.44 (1.29–9.16), consumption of raw/undercooked beef, OR 2.22 (1.57–3.12), and consumption of raw/undercooked sheep meat, OR 3.85 (1.85–8.00). Consumption of raw/undercooked pork, raw eggs, and unpasteurized milk proved to be non-significant risk factors. Limitations: Limitations in the present review and meta-analysis are due to the low number of case-control studies available for analysis and the lack of a search strategy targeting gray literature. Conclusion: Consumption of raw/undercooked beef and sheep meat are important risk factors for T. gondii infection. Their consumption should be avoided in order to prevent toxoplasmosis, particularly by those in at-risk categories, including pregnant women. The review protocol is registered in PROSPERO database (CRD42016043295).     

Simple and high-throughput method for the multimycotoxin analysis in cereals and related foods by ultra-high performance liquid chromatography/tandem mass spectrometry

A rapid, reliable and sensitive method was developed to determine 12 mycotoxins (deoxynivalenol, aflatoxins B1, B2, G1, G2 and M1, fumonisins B1 and B2, ochratoxin A, HT-2 and T-2 toxin and zearalenone) simultaneously in maize, walnuts, biscuits and breakfast cereals. The method is based on a single extraction step using acetonitrile/water mixture (80/20 v/v) followed by ultra-high performance liquid chromatography coupled with tandem mass spectrometry (UHPLC–MS/MS). The selectivity of the MS/MS detection allowed the elimination of further clean up steps. Extraction, chromatographic and detection conditions were optimised in order to increase sample throughput and sensitivity. Matrix-matched calibration was used for quantification and recoveries of the extraction process ranged from 70.0% and 108.4%, with relative standard deviations lower than 25% in all the cases, when samples were fortified at 5 and 50 μg/kg. Limits of detection ranged from 0.01 to 2.1 μg/kg and limits of quantification ranged from 0.03 to 6.30 μg/kg, which were always below the tolerance levels of mycotoxins set by European Union in the matrices evaluated. Several samples were analysed and aflatoxins B1, B2, G1, G2 and T-2 toxin were detected in one maize sample, with concentrations lower than 6.0 μg/kg and deoxynivalenol was detected in a breakfast cereal at 42.1 μg/kg.