Application results of a prototype ultrasonic liquid film sensor to a 7 MPa steam–water two-phase flow experiment

A prototype ultrasonic liquid film sensor was applied to a high-temperature steam–water two-phase flow experiment. The liquid film sensor was vertically installed in a loop which was connected to HUSTLE, a multi-purpose steam source test facility. The hydraulic diameter of the measurement section was 9.4 mm. The output waveforms of the sensor were acquired with a digital oscilloscope. The fluid temperature and system pressure were kept at 288 °C and 7.2 MPa, respectively, during the experiment. The pulse-echo method was used to calculate the liquid film thickness. The cross-correlation calculation was utilized to determine the time difference between the pulse reflected at the sensor surface and the pulse reflected at the liquid film surface. The time-averaged liquid film thicknesses were less than 0.055 mm in the annular flow condition. The increase of the time-averaged thickness was small with the change of the gas momentum flux. The film thicknesses measured with the sensor were compared with the past experimental results; the former were smaller than one-fourth of the thickness estimated as the mean film thickness. The comparison results suggested that the continuous liquid sublayer thickness was measured with the liquid film sensor.     

Thermodynamic Properties of Ionic Semiclathrate Hydrate Formed with Tetrabutylammonium Propionate

The phase equilibrium temperature and dissociation heat of tetrabutylammonium propionate (TBAPr) hydrate are reported. TBAPr hydrate is a type of ionic semiclathrate hydrates and also could potentially be used as thermal energy storage material. The temperature‐composition phase diagram of the TBAPr hydrate was determined in a defined range of mass fractions. Considering the dissociation heat of differential scanning calorimetry (DSC) measurements, multiple peaks of heat flow were observed in the TBAPr‐water system at the TBAPr mass fraction lower than 0.35, and there was a single peak at the mass fraction higher than 0.37.     

A Method for Reducing the Dead‐Time Voltage and Impedance Voltage in a Series Voltage Compensator

Many research groups are developing series voltage compensators. In a series converter, since a transformer is used in series in the power system, the power system current flows into the voltage source inverter through the transformer. The inverter current, which is determined by the transformation ratio, gives rise to an error voltage that consists of a dead‐time voltage and an impedance voltage. The error voltage is generated even when the reference voltage is zero. This paper describes the mechanism by which the error voltage occurs and proposes a method for reducing the error voltage. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 85–93, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22333     

Density-Functional Theoretical Study on the Role of Lewis and Brønsted Acid Sites on CeO2(110) Surfaces for Nitrile Hydration

Hydration of cyanopyridine on CeO₂(110) surfaces was studied using periodic DFT+U calculations. One of two adsorption modes of 2-cyanopyridine occurs with two-point interaction which causes substrate specificity. A catalytic cycle for the hydration of 2-cyanopyridine was proposed. Cooperativity of Lewis and Brønsted acid sites was found to stabilize the intermediates for the hydration.     

Effect of annealing on photovoltaic properties and microstructure of conventional and inverted organic solar cells using active bilayer based on liquid‐crystal semiconducting polymer and fullerene

Conventional and inverted organic solar cells of poly[9,9‐dioctyl‐fluorene‐co‐bithiophene] (F8T2) as liquid‐crystal semiconducting polymer and fullerene as electron acceptor were fabricated and characterized. An effect of thermal treatment of the films on annealing condition near glass transition was investigated for tuning optimization and improving the photovoltaic and optical properties. Annealing treatment below the glass transition improved the photovoltaic performance and carrier diffusion in crystal growth of active layer. The X‐ray diffraction patterns indicate a crystalline structure with molecular order of F8T2 in crystal index, 100 as a layer distance between sheets of F8T2 chains. The photovoltaic properties were based on molecular interactions with molecular ordering in active layer at crystal state. As the photovoltaic mechanisms, the F8T2 thin film as p‐type semiconducting polymer worked for electron‐donor layer to support light‐induced generation, carrier diffusion and charge transfer near interface in active layer. Copyright © 2014 John Wiley & Sons, Ltd.     

Magnetovolume effects in manganese nitrides with antiperovskite structure

Magnetostructural correlations in antiperovskite manganese nitrides were investigated systematically for stoichiometric and solid solution Mn₃Cu_1?xA_xN (A = Co, Ni, Zn, Ga, Ge, Rh, Pd, Ag, In, Sn or Sb). This class of nitrides is attracting great attention because of their giant negative thermal expansion, which is achieved by doping Ge or Sn into the A site as a relaxant of the sharp volume contraction on heating (spontaneous volume magnetostriction ω_s) because of the magnetovolume effects. The physical background of large ω_s and mechanism of how the volume contraction becomes gradual with temperature are central concerns for the physics and applications of these nitrides. An entire dataset of thermal expansion, crystal structure and magnetization demonstrates that the cubic triangular antiferromagnetic state is crucial for large ω_s. The intimate relationship between ω_s and the magnetic structure is discussed in terms of geometrical frustration related to the Mn₆N octahedron and magnetic stress concept. The results presented herein also show that ω_s depends on the number of d electrons in the A atom, suggesting the important role of the d orbitals of the A atom. Not all the dopants in the A site, but the elements that disturb the cubic triangular antiferromagnetic state, are effective in broadening the volume change. This fact suggests that instability neighboring the phase boundary is related to the broadening. The relation between the gradual volume change and the local structure anomaly is suggested by recent microprobe studies.     

Effect of α-substituents on molecular motion and wetting behaviors of poly(fluoroalkyl acrylate) thin films with short fluoroalkyl side chains

The effect of α-substituent on the molecular motion and wetting behavior of poly{2-(perfluorobutyl)ethyl acrylate} [PFA-C₄], poly{2-(perfluorobutyl)ethyl methacrylate} [PFMA-C₄], poly{2-(perfluorobutyl)ethyl α-fluoroacrylate} [PFFA-C₄], and poly{2-(perfluorobutyl)ethyl α-chloroacrylate} [PFClA-C₄] films were characterized by dynamic contact angle measurement, lateral force microscopy (LFM), wide angle X-ray diffraction (WAXD), and X-ray photoelectron spectroscopy (XPS). WAXD of oriented PFClA-C₄ fiber suggested the presence of rod-like chain due to the presence of bulky α-substituent. The glass transition temperature (T_g) of PFFA-C₄ and PFClA-C₄ were well above the room temperature. The water repellencies of PFFA-C₄ and PFClA-C₄ were as high as that of PFMA-C₄ and their oil repellency of PFFA-C₄ and PFClA-C₄ was higher than the PFMA-C_4. This result was originated from the low main chain mobility of PFFA-C₄ and PFClA-C₄ due to the presence of bulky α-substituents. The effect of molecular motion on water repellency was clarified by the results of temperature dependence studies of dynamic contact angle, LFM, and surface chemical composition measured by XPS.     

Control strategy for a distributed DC power system with renewable energy

This paper deals with a DC-micro-grid with renewable energy. The proposed method is composed of a gearless wind power generation system, a battery, and DC loads in a DC distribution system. The battery helps to avoid the DC over-voltages by absorbing the power of the permanent magnet synchronous generator (PMSG) during line-fault. In addition, the control schemes presented in this paper including the maximum power point tracking (MPPT) control and a pitch angle control for the gearless wind turbine generator. By means of the proposed method, high-reliable power can be supplied to the DC distribution system during the line-fault and stable power supply from the PMSG can be achieved after line-fault clearing. The effectiveness of the proposed method is examined in a MATLAB/Simulink^® environment.     

A consistent grayscale‐free topology optimization method using the level‐set method and zero‐level boundary tracking mesh

This paper proposes a level‐set based topology optimization method incorporating a boundary tracking mesh generating method and nonlinear programming. Because the boundary tracking mesh is always conformed to the structural boundary, good approximation to the boundary is maintained during optimization; therefore, structural design problems are solved completely without grayscale material. Previously, we introduced the boundary tracking mesh generating method into level‐set based topology optimization and updated the design variables by solving the level‐set equation. In order to adapt our previous method to general structural optimization frameworks, the incorporation of the method with nonlinear programming is investigated in this paper. To successfully incorporate nonlinear programming, the optimization problem is regularized using a double‐well potential. Furthermore, the sensitivities with respect to the design variables are strictly derived to maintain consistency in mathematical programming. We expect the investigation to open up a new class of grayscale‐free topology optimization. The usefulness of the proposed method is demonstrated using several numerical examples targeting two‐dimensional compliant mechanism and metallic waveguide design problems. Copyright © 2014 John Wiley & Sons, Ltd.