Improved thin film stability of differently formulated,printed, and crosslinked polymer layers against successive solvent printing

Interface control remains a top challenge of solution-processed organic light emitting diodes (OLED) stacks since the device performance heavily relies on it. Film stability of an inkjet deposited and crosslinked layer against subsequent exposure to a suitable inkjet printed solvent has been investigated. Impact of processing solvent (solvent used to prepare the polymer layer) on solution-cast thin film properties has already been shown for polymer films. To our knowledge, this study is the first one analyzing thin films stability against solvent exposure using technology relevant materials processed via inkjet printing (IJP). The outcome of this research showed that the stability of the crosslinked films is affected by the solvent used for ink formulation. These findings are of great interest for multilayered semiconductors devices, such as OLEDs, field-effect transistors and dye-sensitized solar cells. Differential scanning calorimetry (DSC) was used to quantify the efficiency of the polymer crosslinking reaction in pure powder and in thin films, as processed from different solvents. Crosslinking efficiency measured by DSC correlated well with the deformation induced by the solvent and observed on layer surfaces. The interaction in solution between polymer and solvent has also been evaluated to explain its impact on thin film stability against successive solvent printing. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48895.     

Topology optimization for crashworthiness of thin-walled structures under axial impact using hybrid cellular automata

Although topology optimization is well established in most engineering fields, it is still in its infancy concerning highly non-linear structural applications like vehicular crashworthiness. One of the approaches recently proposed and based on Hybrid Cellular Automata is modified here such that it can be applied for the first time to thin-walled structures. Classical methods based on voxel techniques, i.e., on solid three-dimensional volume elements, cannot derive structures made from thin metal sheets where the main energy absorption mode is related to plastic buckling, folding and failure. Because the main components of car structures are made from such thin-walled beams and panels, a special approach using SFE CONCEPT was developed, which is presented in this paper.     

Der Schau- und Lehrstollen Arzberg/Steiermark: Beispiel für eine intelligente Nachnutzung eines Altbergbaus

Touristic mines are by far not only of public interest. During guided tours the importance of mining and mineral resources for society can be explained in a proper way. Mineral deposits, for long time not accessible and only known from old literature can now be studied in detail by scientists. Old underground mines can be used for different purposes. With respect to Arzberg the different possibilities of utilization of old underground workings are described in detail: A touristic mine serves not only as an attraction, but also as a training centre for underground geological mapping, geochemistry and geophysics research laboratory of universities. For many years the ZAMG (Central Institute for Meteorology and Geodynamics) has been operating a seismic station, and parts of the old mine workings have been used for cheese refinery since 2006. Furthermore, the mine water is utilized for extracting geothermal energy and serves the cooling chambers. The combined use of the old mine workings by different parties permits sharing the substantial maintenance costs.     

metaSMT: focus on your application and not on solver integration

International Journal on Software Tools for Technology Transfer - Many applications from artificial intelligence and formal methods use decision procedures as their core solving engines. In this...     

Redox processes in pressurised smoked salmon studied by resonance Raman spectroscopy

Non-thermal food preservation technology is based on the application of high pressures up to 600 MPa. Here we report a resonance Raman (RR) spectroscopic analysis of smoked salmon meat after high pressure processing. High quality spectra, which can be obtained even from packed salmon without spectral interference of the packing foil, allow determining pressure-dependent irreversible changes of the main RR-active components of salmon meat, astaxanthin and myoglobin/haemoglobin. High pressure-treatment causes a decrease of the relative RR intensities of astaxanthin as probed with 514 nm excitation which is in line with a slight attenuation of the originally intense red colour of the salmon meat. 413-nm excited RR spectra indicate a heterogeneous broadening of astaxanthin bands accompanied by the formation of deoxy-myoglobin or deoxy-haemoglobin. The results suggest that pressure-treatment facilitates the oxidative degradation of astaxanthin coupled to the reduction of metmyoglobin (methaemoglobin).     

Passive 350 GHz Video Imaging Systems for Security Applications

Journal of Infrared, Millimeter, and Terahertz Waves - Passive submillimeter-wave imaging is a concept that has been in the focus of interest as a promising technology for personal security...     

Demonstration of the monolithic interconnection on CIS solar cells by picosecond laser structuring on 30 by 30 cm2 modules

In this paper, we present the selective structuring of all three patterns (P1, P2 and P3) of a monolithic interconnection of CIS (Cu(In,Ga)(S,Se)₂) thin film solar cells by picosecond laser pulses at a wavelength of 1064 nm. We show results for single pulse ablation threshold values and line scribing of molybdenum films on glass (P1), CIS on molybdenum (P2) and zinc oxide on CIS (P3). The purposes of these processes are the p‐type isolation (P1), cell interconnect (P2) and n‐type isolation (P3), which are required for complete cell architecture. The half micron thick molybdenum back electrode can be structured with a process speed of more than 15 m/s at about 15 W average power without detectable residues and damage by direct induced laser ablation from the back side (P1). The CIS layer can be structured selectively down to the molybdenum at process speeds up to 1 m/s at about 15 W average power, due to the precision of direct laser ablation in the ultrashort pulse regime (P2). The ZnO front electrode layer is separated by clean trenches with straight side walls at process speeds of up to 15 m/s at about 10 W average power, as a result of indirect induced laser ablation (P3). A validation of functionality of all processes is demonstrated on CIS solar cell modules (30 × 30 cm²). By replacing one state‐of‐the‐art process by a picosecond laser process at a time, solar efficiencies could be increased for P1 and P2 and stayed on a similar level for P3. After an optimization of the patterning processes in the R&D pilot line of AVANCIS, we achieved a new record efficiency for an all‐laser‐patterned CIS solar module: 14.7% as best value for the aperture area efficiency of a 30 × 30 cm² sized CIS module was reached. Copyright © 2014 John Wiley & Sons, Ltd.