A rheo-optical study on the reformation of structure in racemic poly(γ-benzyl glutamate) liquid crystals

Transmitted light intensities were measured by means of the polarized light technique for the nematic liquid crystal phase of racemic poly(γ-benzyl glutamate) (PBG) in m-cresol at 25°C after cessation of steady flow at shear rates ranging from 0.2 to 110 s^?1. Weight-average molecular weights of PBG used were 1.5, 2.1, and 2.6 × 10⁵, while the concentrations varied between 20, 30, and 40 wt percent. Transmitted light intensities with crossed and parallel polarizers, I_x and I_|, show wavy changes with time after cessation of steady flow, indicating the retardation decreases with time. An attempt was made to explain experimental results on the basis of a simple model, in which not only relaxation of molecular orientation but also effects of the wall and disclination were taken into account.     

Quantitative analysis of the action of Taka-amylase A on maltotriose

The action of Taka-amylase A from Asp. oryzae was studied quantitatively by the product analysis method using unlabeled maltotriose and maltotriose labeled at the reducing end as substrates. It was found that the ratio of the unlabeled products, maltose (G2) and glucose (G1) exceeded unity, and that the ratio of the labeled products, G2/G1 was strongly dependent on the initial substrate concentrations. The results can only be explained by a transglycosylation or condensation mechanism or both. Analysis of maltose labeled at the nonreducing or reducing end reveal that the ratio of the transglycosylation to the condensation mechanism was about 20:1 with about 80 mM maltotriose. A computer simulation was made on a reaction scheme involving the termolecular-shifted complex, transglycosylation and condensation besides hydrolysis, by using reported subsite affinities as modified by the authors. The simulation reproduced the experimental results satisfactorily.     

Improved efficiency of polymer light-emitting diodes by inserting a hole transport layer formed without thermal treatment above glass transition temperature

We have demonstrated a significant improvement in the performance of polymer light-emitting diodes (PLEDs) by inserting the fluorene-triatylamine copolymer as hole transport layer (HTL) without a thermal treatment above the glass transition temperature (T_g). A thin HTL insolubilized by a thermal treatment above T_g is often inserted as an interlayer between an anode buffer layer and a light-emitting polymer (LEP) in PLEDs fabricated by using a conventional solution process. The evaporative spray deposition using ultradiluted solution (ESDUS) method has enabled fabricating polymer bilayer structure without an insolublizing procedure. The bilayer PLEDs fabricated by ESDUS without the thermal treatment showed significantly higher and more stable external quantum efficiency than PLEDs having the conventional interlayer. Thermal treatment above T_g of the copolymer would induce degradation of its hole injection property. Furthermore, ESDUS bilayer devices showed much higher power efficiency than interlayer devices when calcium was used for cathode. The improvements would be caused by the enhancement of hole injection and the effective electron blocking at the copolymer/LEP interface in the ESDUS bilayer devices.     

Detection of norovirus RNA in bivalve molluscs by using bacteria-culture-employed method (A3T method)

Norovirus (NV) RNA has rarely been detected in foods despite the use of highly sensitive methods such as RT-PCR and real-time RT-PCR. In the modified method (A3T method) reported previously, a bacterial culture process was introduced into the standard protocol for NV detection to remove some inhibitor(s) present in food ingredients. To confirm the efficiency of the A3T method and to examine NV contamination in bivalve molluscs, we tried to detect NV RNA in bivalve molluscs on the market and in oyster samples associated with foodborne outbreaks by using the standard method and the A3T method. NV RNAs were detected in 20 samples (18.0%) of 111 bivalve molluscs, including oysters, on the market by use of the A3T method, while only one sample (0.9%) was positive according to the standard method. NV RNA was also detected in 10 of 35 oyster samples related to foodborne outbreaks by the A3T method. Those results show that the A3T method is suitable for the detection of NV in bivalve molluscs in general laboratories.     

Porphylipoprotein Accumulation and Porphylipoprotein Photodynamic Therapy Effects Involving Cancer Cell-Specific Cytotoxicity

In photodynamic therapy (PDT) for neoplasms, photosensitizers selectively accumulate in cancer tissue. Upon excitation with light of an optimal wavelength, the photosensitizer and surrounding molecules generate reactive oxygen species, resulting in cancer cell-specific cytotoxicity. Porphylipoprotein (PLP) has a porphyrin-based nanostructure. The porphyrin moiety of PLP is quenched because of its structure. When PLP is disrupted, the stacked porphyrins are separated into single molecules and act as photosensitizers. Unless PLP is disrupted, there is no photosensitive disorder in normal tissues. PLP can attenuate the photosensitive disorder compared with other photosensitizers and is ideal for use as a photosensitizer. However, the efficacy of PLP has not yet been evaluated. In this study, the mechanism of cancer cell-specific accumulation of PLP and its cytotoxic effect on cholangiocarcinoma cells were evaluated. The effects were investigated on normal and cancer-like mutant cells. The cytotoxicity effect of PLP PDT in cancer cells was significantly stronger than in normal cells. In addition, reactive oxygen species regulated intracellular PLP accumulation. The cytotoxic effects were also investigated using a cholangiocarcinoma cell line. The cytotoxicity of PLP PDT was significantly higher than that of laserphyrin-based PDT, a conventional type of PDT. PLP PDT could also inhibit tumor growth in vivo.     

Structure-Based Design,Synthesis, and Biological Evaluation of Imidazo[4,5-b]Pyridin-2-one-Based p38 MAP Kinase Inhibitors: Part 2

We identified novel potent inhibitors of p38 mitogen-activated protein (MAP) kinase using a structure-based design strategy, beginning with lead compound, 3-(butan-2-yl)-6-(2,4-difluoroanilino)-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-one ( 1 ). To enhance the inhibitory activity of 1 against production of tumor necrosis factor-α (TNF-α) in human whole blood (hWB) cell assays, we designed and synthesized hybrid compounds in which the imidazo[4,5-b]pyridin-2-one core was successfully linked with the p-methylbenzamide fragment. Among the compounds evaluated, 3-(3-tert-butyl-2-oxo-2,3-dihydro-1H-imidazo[4,5-b]pyridin-6-yl)-4-methyl-N-(1-methyl-1H-pyrazol-3-yl)benzamide ( 25 ) exhibited potent p38 inhibition, superior suppression of TNF-α production in hWB cells, and also significant in vivo efficacy in a rat model of collagen-induced arthritis (CIA). In this paper, we report the discovery of potent, selective, and orally bioavailable imidazo[4,5-b]pyridin-2-one-based p38 MAP kinase inhibitors.     

Unique crystal structures and their applications as materials for Li1+x-yM1-x-3yTix+4yO3 (M = Nb or Ta, 0.07 ≤ x ≤ 0.33, 0 ≤ y ≤ 0.175)

In the Li₂O–M₂O₅–TiO₂ (M = Nb or Ta) system, Li_1+x-yM_1-x-3yTi_x+4yO₃ (LMT) forms with a superstructure known as the M-phase, in which the periodical intergrowth layers are inserted in a matrix having a trigonal structure of LiMO₃. We have been investigating this unique material focusing on its crystal structure, photoluminescence, and electrical properties.First, the formation area of the superstructure was compared between Nb- and Ta- systems and the difference was accurately analyzed.Second, to apply this unique material as a host material of phosphor, we synthesized new phosphors with various emission colors. Red phosphor, having a high PL intensity with an internal quantum efficiency of 98%, was successfully synthesized and used as a host material of the solid solution for the Ta system. Its high value was the result of the large centroid-to-cation distance of the Eu³⁺ position in the [(Li, Eu)O₁₂] polyhedral.Further still, toward application of the unique qualities of an electro-ceramic, we successfully fabricated oriented balk ceramics for the Nb system by slip casting in a strong magnetic field of 12 T. As a result, anisotropic electric properties were found along the c-axis, which were caused by the superstructure. We first clarified the mechanism showing that the anisotropic Qf value was due to anisotropic electron conductivity and anisotropic bonding strength within the superstructure.     

Effect of microstructure on discharge performance of Al–0.8Sn–0.05Ga–0.9Mg–1.0Zn (wt%) alloy as anode for seawater-activated battery

The electrochemical performance and discharge behavior of Al–0.8Sn–0.05Ga–0.9Mg–1.0Zn (wt%) alloys in as-cast, homogenized, and annealed states were investigated through electrochemical means, corrosion rate test, and discharge test in a 3.5 wt% NaCl solution. Results suggest that the discharge performance of this alloy is enhanced by rolling and subsequent annealing treatment. This is attributed to the fact that the microstructure of the alloy is greatly improved through rolling and subsequent annealing treatment. The 400°C-annealed alloy exhibits the most excellent discharge activity than alloys in other states, which is due to more regions being activated by a finer and more uniform Sn-rich phase. Furthermore, the anode efficiency of the 400°C-annealed alloy is higher than that of as-cast and homogeneous alloys due to the more uniform distribution of Sn in the aluminum matrix.     

Inherited effects from artificial aging on the tensile creep behaviors of hot-rolled Mg–7.5wt%Y alloy

Journal of Materials Science - Herein, the impacts of inherited attributes from artificial aging treatment of the hot-rolled Mg–7.5wt%Y alloy’s tensile creep resistance were...