Understanding the high-temperature deformation

Engineering, University of Texas at Austin, Austin, TX 78712 While much of the high-temperature intermetallics research has centered around Ni3Al and other aluminum-based systems, the present study focuses on the Engel-Brewer Ll₂ intermetallic Ir₃Zr, which has a melting temperature approaching that of ceramics (2280 °C). Due to limited material availability, the technique of microindentation was used to study both the temperature and time dependence of strength. Because of the widely held belief that certain mechanical properties of intermetallics scale roughly with temperature, Ir₃Zr was expected to exhibit high strength. The microhardness was observed to vary from 225 MPa at room temperature to 75 MPa at 1400 °C, which is significantly lower than the behavior of Ni₃Al. The activation energy for creep was determined to be 467 kJ/mole, and the stress exponent was found to be 18.2. The ordering energy of this system was calculated to be 0.114 eV. If it can be assumed that high ordering energy correlates to a high antiphase boundary (APB) energy, then the behavior of this system is consistent with a model that predicts highly glissile dislocation cores.     

Air Pollution Emission Inventory Survey for Israel

High ozone levels are regularly measured during summer months over the inland and mountainous regions of Israel. Studies analyzing the back trajectories of air masses responsible for the high ozone levels showed that the precursors originated from the densely populated Israeli coastline. In order to better understand the contribution of those emission sources to ozone production, it is essential to have an accurate emission inventory that can be inputted into a photochemical model. The present paper describes the methods used in preparing an emission inventory for Israel based on information available and published until 1998. The source and accuracy of the data available are described. The calculations performed and the assumptions taken in order to obtain data not directly available are clarified. The sources reported in the inventory were the major polluters (power plants, oil refineries, and cement industries); industry; transportation; and biogenic sources. The pollutants studied were SO₂, NO_x, CO, saturated and unsaturated hydrocarbons, ethylene, isoprene, toluene, xylene, formaldehyde, and aldehydes. The inventory showed that transportation is responsible for almost the entire CO and 30% of the volatile organic compounds emitted, although transportation itself accounts for only a fifth of total fuel consumption. About 75% of the NO_x emitted can be attributed to industrial sources and the remaining 25% to transportation. Model simulations using the emission inventory were performed and compared to data available from a monitoring station situated 30 km east of Tel Aviv. The results showed good agreement, validating the accuracy of the emission inventory. The present emission inventory provides an important database as input to photochemical models used in forecasting ozone levels over Israel.     

New type of two-axis magnetometer

A new simple two-axis magnetometer has been developed. based on the superposition of an amorphous ferromagnetic disc over a disc-shaped piezoelectric support. At low frequencies, this device exhibits a sensitivity of ~1.7 μV/μT when the external magnetic field is orthogonal to one of the pick-up coils     

Induction by interleukin-1beta peptide of prostaglandin E2 formation via enhanced prostaglandin H synthase-2 expression in 3T6 fibroblasts

Several synthetic interleukin-1 (IL-1) peptides were tested in vivo for pyrogenic activity and in vivo for their ability to stimulate prostaglandin production. Only the IL-1beta fragment (208-240) enhanced body temperature, although both IL-1beta (208-240) and IL-1alpha (223-250) stimulated prostaglandin E2 (PGE2) production in vitro. We report here that the IL-1beta fragment (208-240) did not have the capacity to induce arachidonic acid (AA) mobilization by 3T6 fibroblasts. However, this peptide was able to increase the expression of the inducible prostaglandin H synthase isoform (PGHS-2; EC 1.14.99.1.), which is related to its ability to stimulate prostaglandin E2 synthesis.     

Education reform: Challenges for psychology and psychologists.

National, state, and local education reform agendas have been on a fast track for more than a decade. Although some psychologists have been active in promoting psychology and psychological services in education reform initiatives, knowledge about their efforts is fragmented. In order to educate psychologists about education reform, this article highlights the impetus for the recent education reform movement, briefly reviews the latest waves of education reform, and discusses the development of the National Education Goals. Then, an argument is made for the integration of education, health, and social reform initiatives; state-level education reform principles and initiatives are highlighted, illustrated by the systemic education reform mandate in Kentucky. Next, progress toward the development and implementation of an APA-sponsored response to the National Education Goals is discussed. Finally, objectives and roles for psychologists in advancing education reform are presented, and guidelines for the education and training of future psychologists are introduced. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Threshold voltage models of short,narrow and small geometry MOSFET's: A review

As MOS devices are shrunk to near and submicrometer dimensions, short channel, narrow width and small geometry effects cause variations in the threshold voltage. It is critical for circuit and device designers to be able to predict these variations. This paper reviews and compares the various modeling techniques developed to determine the threshold voltage as a function of device geometry. It is hoped this review will provide insights for the development of new models for today's small devices.     

Electrodeposited amorphous Co-P alloys with variable magnetic anisotropy

A method is indicated for obtaining electrodeposited amorphous Co-P alloys with differing anisotropies, employing an alternating current density of very low frequency. The method allows samples of a high degree of permeability to be obtained with the result that, in the case of a current density at 5 Hz with amplitude between +0.6 and -0.2 A/cm², the magnetic properties are similar to those found by Dietz and coworkers, in samples deposited on rotating cylindrical substrates. In the case of samples without perpendicular anisotropy, there can be observed a distribution of the magnetization in the plane, with 180° domains.     

Effects of organizational scheme and labeling on task performance in product-centered and user-centered retail Web sites

As companies increase the quantity of information they provide through their Web sites, it is critical that content is structured with an appropriate architecture. However, resource constraints often limit the ability of companies to apply all Web design principles completely. This study quantifies the effects of two major information architecture principles in a controlled study that isolates the incremental effects of organizational scheme and labeling on user performance and satisfaction. Sixty participants with a wide range of Internet and on-line shopping experience were recruited to complete a series of shopping tasks on a prototype retail shopping Web site. User-centered labels provided a significant benefit in performance and satisfaction over labels obtained through company-centered methods. User-centered organization did not result in improved performance except when the label quality was poor. Significant interactions suggest specific guidelines for allocating resources in Web site design. Applications of this research include the design of Web sites for any commercial application, particularly E-commerce.