A method to model realistic particle shape and inertia in DEM

A simple and fast original method to create irregular particle shapes for the discrete element method using overlapping spheres is described. The effects of its parameters on the resolution of the particle shape are discussed. Overlapping spheres induce a non-uniform density inside the particle leading to incorrect moments of inertia and therefore rotational behaviour. A simple method to reduce the error in the principal moments of inertia which acts on the individual densities of the spheres is also described. The pertinence of the density correction is illustrated by the case of free falling ballast particles forming a heap on a flat surface. In addition to improve behaviour, the correction reduces also computational time. The model is then used to analyse the interaction between ballast and geogrid by simulating pull-out tests. The pulling force results show that the model apprehends better the ballast geogrid interlocking than models with simple representation of the shape of the particles. It points out the importance of modelling accurately the shape of particles in discrete element simulations.     

A FINITE ELEMENT METHOD FOR CASTING SIMULATIONS

This paper presents a finite element model for the three-dimensional simulation of industrial mold filling and solidification problems. The finite element solutions of mold filling problems involve highly convective fluid flow coupled with free surface, heat transfer, nonconstant material properties, and complex three-dimensional geometries. They present unusual challenges for both the finite element modeling and numerical solution algorithms. In this work a segregated algorithm is proposed to solve Navier-Stokes, energy, and front tracking equations. The streamline upwind Petrov-Galerkin formulation is used to obtain stable solutions. The position of the free surface is modeled using a level-set approach. The whole procedure is shown to present the accuracy, robustness, and cost-effectiveness needed for complex three-dimensional industrial applications.     

Freshwater DOM quantity and quality from a two-component model of UV absorbance

We present a model that considers UV-absorbing dissolved organic matter (DOM) to consist of two components (A and B), each with a distinct and constant spectrum. Component A absorbs UV light strongly, and is therefore presumed to possess aromatic chromophores and hydrophobic character, whereas B absorbs weakly and can be assumed hydrophilic. We parameterised the model with dissolved organic carbon concentrations [DOC] and corresponding UV spectra for c. 1700 filtered surface water samples from North America and the United Kingdom, by optimising extinction coefficients for A and B, together with a small constant concentration of non-absorbing DOM (0.80 mg DOC L⁻¹). Good unbiased predictions of [DOC] from absorbance data at 270 and 350 nm were obtained (r² = 0.98), the sum of squared residuals in [DOC] being reduced by 66% compared to a regression model fitted to absorbance at 270 nm alone. The parameterised model can use measured optical absorbance values at any pair of suitable wavelengths to calculate both [DOC] and the relative amounts of A and B in a water sample, i.e. measures of quantity and quality. Blind prediction of [DOC] was satisfactory for 9 of 11 independent data sets (181 of 213 individual samples).     

Dried plum products as a substitute for phosphate in chicken marinade

In order to address the growing demand for more natural poultry products, alkaline phosphates commonly used in chicken breast meat marinades were replaced with plum ingredients and evaluated. For initial sensory evaluation, 200 consumers of chicken were served a small portion of the chicken breast on a plate and were asked to evaluate the product for overall impression, flavor, and texture on a 9-point hedonic scale with 1 = "dislike extremely" and 9 = "like extremely." Also, a 5-point just-about-right (JAR) scale was used on questions about tenderness, juiciness, overall flavor, and saltiness. Both hedonic and JAR demonstrated that the marinades of plum concentrate and the blend of plum fiber and powder were not distinguishable from the control (P > 0.05). Using two different percentages of fiber/powder blend, two different percentages of concentrate, sodium tripolyphosphate (STPP), and no marinade, measurements were made for marinade per cent pickup, thaw loss, and cook loss. Plum concentrate at 1.1% was most similar to STPP in marinade per cent pickup, thaw loss, drip loss, and cook loss. These results show that plum ingredients can potentially be used as a substitute in standard phosphate marinades. PRACTICAL APPLICATION: Consumers are increasingly demanding more natural foods with less artificial additives. This research presents the results of experiments using dried plum ingredients as a substitute for phosphates commonly used in marinades for chicken. Results indicate that dried plum ingredients may be a suitable substitute for phosphates in marinades.     

Linear and nonlinear elastic modulus imaging: an application to breast cancer diagnosis

We reconstruct the in vivo spatial distribution of linear and nonlinear elastic parameters in ten patients with benign (five) and malignant (five) tumors. The mechanical behavior of breast tissue is represented by a modified Veronda-Westmann model with one linear and one nonlinear elastic parameter. The spatial distribution of these elastic parameters is determined by solving an inverse problem within the region of interest (ROI). This inverse problem solution requires the knowledge of the displacement fields at small and large strains. The displacement fields are measured using a free-hand ultrasound strain imaging technique wherein, a linear array ultrasound transducer is positioned on the breast and radio frequency echo signals are recorded within the ROI while the tissue is slowly deformed with the transducer. Incremental displacement fields are determined from successive radio-frequency frames by employing cross-correlation techniques. The rectangular regions of interest were subjectively selected to obtain low noise displacement estimates and therefore were variables that ranged from 346 to 849.6 mm2 . It is observed that malignant tumors stiffen at a faster rate than benign tumors and based on this criterion nine out of ten tumors were correctly classified as being either benign or malignant.     

0D/2D Heterostructures Vertical Single Electron Transistor

Mixed-dimensional heterostructures formed by the stacking of 2D materials with nanostructures of distinct dimensionality constitute a new class of nanomaterials that offers multifunctionality that goes beyond those of single dimensional systems. An unexplored architecture of single electron transistor (SET) is developed that employs heterostructures made of nanoclusters (0D) grown on a 2D molybdenum disulfide (MoS₂) channel. Combining the large Coulomb energy of the nanoclusters with the electronic capabilities of the 2D layer, the concept of 0D–2D vertical SET is unveiled. The MoS₂ underneath serves both as a charge tunable channel interconnecting the electrode, and as bottom electrode for each v-SET cell. In addition, its atomic thickness makes it thinner than the Debye screening length, providing electric field transparency functionality that allows for an efficient electric back gate control of the nanoclusters charge state. The Coulomb diamond pattern characteristics of SET are reported, with specific doping dependent nonlinear features arising from the 0D/2D geometry that are elucidated by theoretical modeling. These results hold promise for multifunctional single electron device taking advantage of the versatility of the 2D materials library, with as example envisioned spintronics applications while coupling quantum dots to magnetic 2D material, or to ferroelectric layers for neuromorphic devices.     

The First European Parabolic Flight Campaign with the Airbus A310 ZERO-G

Aircraft parabolic flights repetitively provide up to 23 seconds of reduced gravity during ballistic flight manoeuvres. Parabolic flights are used to conduct short microgravity investigations in Physical and Life Sciences and in Technology, to test instrumentation prior to space flights and to train astronauts before a space mission. The use of parabolic flights is complementary to other microgravity carriers (drop towers, sounding rockets), and preparatory to manned space missions on board the International Space Station and other manned spacecraft, such as Shenzhou and the future Chinese Space Station. After 17 years of using the Airbus A300 ZERO-G, the French company Novespace, a subsidiary of the ’Centre National d’Etudes Spatiales’ (CNES, French Space Agency), based in Bordeaux, France, purchased a new aircraft, an Airbus A310, to perform parabolic flights for microgravity research in Europe. Since April 2015, the European Space Agency (ESA), CNES and the ‘Deutsches Zentrum für Luft- und Raumfahrt e.V.’ (DLR, the German Aerospace Center) use this new aircraft, the Airbus A310 ZERO-G, for research experiments in microgravity. The first campaign was a Cooperative campaign shared by the three agencies, followed by respectively a CNES, an ESA and a DLR campaign. This paper presents the new Airbus A310 ZERO-G and its main characteristics and interfaces for scientific experiments. The experiments conducted during the first European campaign are presented.     

Experimental and numerical investigation of shear strain along an elasto-plastic bonded lap joint

This study investigates the use of an elasto-plastic adhesive in a bonded double lap joint to increase its ultimate capacity. The first section describes the experimental work we performed to characterize the materials and measure the shear strain along the joint. A comparison between an elastic adhesive and a highly plastic adhesive is made and the effect of the type of behaviour on both the capacity and the characteristic anchorage length is studied. The second section then compares the experimental results with a classical 3D finite element model. Good correlation was found between numerical expectations and experimental measurements, and the modelling allowed us to highlight typical phenomena linked to the use of an elasto-plastic adhesive. In addition, a parameter based on a microscopic measurement has been defined which allows us to describe the onset of plasticity and predict maximum capacity.     

Very fast blind source separation by signal to noise ratio based stopping threshold for the SHIBBS/SJAD algorithm

This paper works on joint approximate diagonalization of simplified fourth order cumulant matrices for very fast and large scale blind separation of instantaneous mixing model sources. The JADE algorithm is widely accepted but only limited to small scale separation tasks. The SHIBBS algorithm calculates a fraction of the fourth order cumulant set and avoids eigenmatrix decomposition to reduce calculation cost. However, it was seen to be slower than JADE at the time of its first publication and is hence less known. On the other hand, the SJAD algorithm using the same approach is shown to be very fast. This paper studies the iteration convergence criterion and proposes to use a signal to noise ratio based iteration stopping threshold approach. The improved SHIBBS/SJAD algorithm is very fast, and capable of large scale separation. Experimental separation comparisons between the SHIBBS/SJAD and FastICA are presented.