Penetrating cardiac wounds: prospective study of factors influencing initial resuscitation

A prospective study of 66 consecutive patients with cardiac wounds seen over a 27-month period is reported. No patient was excluded. Patients were stratified by injury mechanism and by physiologic scoring at admission using the cardiovascular-respiratory elements of the Trauma Score (CVRS). Admission cardiac rhythm was obtained in patients with a CVRS of 0 and a Glasgow Coma Scale (GCS) score of 3. Information concerning the anatomic extent of the cardiac wound, the presence or absence of tamponade, and the degree of injury to other structures was also collected prospectively. Seventy percent of the cardiac wounds were caused by gunshots. The probability of successful resuscitation was significantly related to mechanism of injury and physiologic condition on arrival. Among patients arriving with a CVRS of 0 and a GCS score of 3, survival correlated with cardiac rhythm. Pericardial tamponade did not prove to be an independent predictor of early survival. The presence of tamponade was statistically linked to the mechanism of injury. Transport by non-official conveyance was associated with a higher CVRS on arrival. Intoxication with alcohol or cocaine had no evident effect on resuscitation probability.     

Designer deletion strains derived from Saccharomyces cerevisiae S288C: a useful set of strains and plasmids for PCR-mediated gene disruption and other applications

A set of yeast strains based on Saccharomyces cerevisiae S288C in which commonly used selectable marker genes are deleted by design based on the yeast genome sequence has been constructed and analysed. These strains minimize or eliminate the homology to the corresponding marker genes in commonly used vectors without significantly affecting adjacent gene expression. Because the homology between commonly used auxotrophic marker gene segments and genomic sequences has been largely or completely abolished, these strains will also reduce plasmid integration events which can interfere with a wide variety of molecular genetic applications. We also report the construction of new members of the pRS400 series of vectors, containing the kanMX, ADE2 and MET15 genes.     

Transporting Deformations of Face Emotions in the Shape Spaces: A Comparison of Different Approaches

Studying the changes of shape is a common concern in many scientific fields. We address here two problems: (1) quantifying the deformation between two given shapes and (2) transporting this deformation to morph a third shape. These operations can be done with or without point correspondence, depending on the availability of a surface matching algorithm, and on the type of mathematical procedure adopted. In computer vision, the re-targeting of emotions mapped on faces is a common application. We contrast here four different methods used for transporting the deformation toward a target once it was estimated upon the matching of two shapes. These methods come from very different fields such as computational anatomy, computer vision and biology. We used the large diffeomorphic deformation metric mapping and thin plate spline, in order to estimate deformations in a deformational trajectory of a human face experiencing different emotions. Then we use naive transport (NT), linear shift (LS), direct transport (DT) and fanning scheme (FS) to transport the estimated deformations toward four alien faces constituted by 240 homologous points and identifying a triangulation structure of 416 triangles. We used both local and global criteria for evaluating the performance of the 4 methods, e.g., the maintenance of the original deformation. We found DT, LS and FS very effective in recovering the original deformation while NT fails under several aspects in transporting the shape change. As the best method may differ depending on the application, we recommend carefully testing different methods in order to choose the best one for any specific application.

     

Effect of olive paste kneading process time on the overall quality of virgin olive oil

The influence of the olive paste malaxation time on the composition and the industrial output of oil was investigated. To this purpose, three Italian olive varieties (Leccino, Dritta, Caroleo) were processed with a centrifugal system for six malaxation periods (0, 15, 30, 45, 60 and 75 min). The concentrations of the majority of the oil constituents changed during the malaxation. However, these changes were not significant for all of them: the contents of β‐carotene, the major xanthophylls, chlorophylls a and b, pheophytins a and b in the oils increased progressively with increasing malaxing times, whereas the contents of simple and hydrolysable phenols (secoiridoid derivatives), o‐diphenols and total phenols decreased. A significant increase in total volatiles and green volatiles of the lipoxygenase cascade (C₆ aldehydes, C₆ alcohols, C₅ alcohols and C₅ carbonyls) was detected. An opposite trend was observed for the green C₆ esters. As a result, the global analytical quality, flavour, aroma and shelf‐life of the oils were negatively affected. The oil yield increased substantially up to 45 min of paste malaxation times. Beyond 60 min, the yields tended to decrease.     

Bi-layer gelatin active films with “Pitanga” leaf hydroethanolic extract and/or natamycin in the second layer

Research on biopolymers-based active films produced with natural antioxidants and/or antimicrobials has gained attention over the last few years; however, anti-mold activity has been less studied than those of anti-bacteria. The aim of this work was the development and characterization of bi-layer films based on gelatin with natamycin and/or “Pitanga” leaf hydroethanolic extract in the second thin layer in order to determine the effects of these bioactive compounds on bi-layered film properties. The films were characterized regarding their moisture content and solubility in water, optical properties, microstructure, mechanical and thermal properties, water contact angle, water vapor permeability, UV/visible light transmission, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and antioxidant and anti-mold activities. Active films presented activity against Penicillium spp and Aspergillus niger and demonstrated antioxidant activity, as measured by ABTS ^•+ and DPPH ^• methods. Neither additive used in the films' second layer significantly affected the films' moisture content, thermal properties or the molecular interactions of the polymer matrix, assessed by FTIR, although some mechanical properties were affected, and the water contact angle. In conclusion, bi-layer films have reduced the quantity of additives required to maintain the antioxidant and anti-mold activities, as compared to similar monolayer films of the same thickness.     

Self-organized porous TiO2 and ZrO2 produced by anodization

The present work investigates the electrochemical formation of self-organized high aspect ratio TiO₂ and ZrO₂ nanotube layers. The formation and growth of a self-organized porous layer can be achieved directly by anodization without any templates in fluoride containing electrolytes. The morphology of the porous layers is affected by the electrochemical conditions such as the electrolyte composition, the pH and the exact polarization treatment (such as the potential sweep rate from the open-circuit potential to the anodizing potential). For Ti, nanotube layers are formed with diameters varying from approx. 20 nm to 100 nm and lengths from approx. 0.25 μm to 2.5 μm depending on the electrolytes and pH. On the other hand, for Zr, tubes of 50 nm in diameter and up to approx. 17 μm in length can be grown—a key parameter in this case is the potential sweep rate. The large difference between Ti and Zr in the achievable thickness of nanotube layers indicates a difference in the growth mechanism which may be based on the different chemical dissolution rates of electrochemically formed oxides.     

Fast intra prediction algorithm based on texture analysis for 3D-HEVC encoders

The advances in display technologies and the growing popularity of 3D video systems have attracted more consumers for 3D viewing experiences, and, consequently, the demand for storage and transmission of 3D video content is increasing. To cope with this demand, a 3D video extension of high-efficiency video coding (HEVC) standard is being developed and near the final standardization stage. The upcoming 3D-HEVC standard is expected to provide higher encoding efficiency than its predecessors, supporting multiple views with high resolution, at a cost of considerable increase in computational complexity, which can be an obstacle to its use in real-time applications. This article proposes a novel complexity reduction algorithm developed to optimize the 3D-HEVC intra mode decision targeting real-time video processing for consumer devices with limited computational power, such as 3D camcorders and smartphones equipped with multiple cameras and depth acquisition capabilities. The proposed algorithm analyzes the texture frames and depth maps to estimate the orientation of edges present in the prediction unit data, speeding up the intra prediction process and reducing the 3D-HEVC encoding processing time. Experimental results demonstrate that the proposed algorithm can save 26 % in computational complexity on average with negligible loss of encoding efficiency. This solution contributes to make more feasible the compression of 3D videos targeting real-time applications in power-constrained devices.     

Conformity Assessments and Post-market Monitoring: A Guide to the Role of Auditing in the Proposed European AI Regulation

The proposed European Artificial Intelligence Act (AIA) is the first attempt to elaborate a general legal framework for AI carried out by any major global economy. As such, the AIA is likely to become a point of reference in the larger discourse on how AI systems can (and should) be regulated. In this article, we describe and discuss the two primary enforcement mechanisms proposed in the AIA: the conformity assessments that providers of high-risk AI systems are expected to conduct, and the post-market monitoring plans that providers must establish to document the performance of high-risk AI systems throughout their lifetimes. We argue that the AIA can be interpreted as a proposal to establish a Europe-wide ecosystem for conducting AI auditing, albeit in other words. Our analysis offers two main contributions. First, by describing the enforcement mechanisms included in the AIA in terminology borrowed from existing literature on AI auditing, we help providers of AI systems understand how they can prove adherence to the requirements set out in the AIA in practice. Second, by examining the AIA from an auditing perspective, we seek to provide transferable lessons from previous research about how to refine further the regulatory approach outlined in the AIA. We conclude by highlighting seven aspects of the AIA where amendments (or simply clarifications) would be helpful. These include, above all, the need to translate vague concepts into verifiable criteria and to strengthen the institutional safeguards concerning conformity assessments based on internal checks.

     

A Joint Numerical-Experimental Study on Impact Induced Intra-laminar and Inter-laminar Damage in Laminated Composites

The investigation of the mechanical response of fibre-reinforced composite laminates under impact loads can be very difficult due to the occurrence of simultaneous failure phenomena. Indeed, as a consequence of low velocity impacts, intra-laminar damages, like fibre and matrix cracking, and inter-laminar damages, such as delaminations, can take place simultaneously. These damage mechanisms can lead to significant reductions in strength and stability of the composite structure. In this paper a joint numerical-experimental study is proposed which, by means of non-destructive testing techniques (Ultra-sound and thermography) and non-linear explicit FEM analyses, aims to completely characterise the impact induced damage in composite laminates under low velocity impacts. Indeed the proposed numerical tool has been used to improve the understanding of the experimental data obtained by Non-Destructive Techniques. Applications on samples tested according to the AECMA (European Association of Aerospace Manufacturers) prEn6038 standard at three different impact energies are presented. The interaction between numerical and experimental investigation allowed to obtain an exhaustive insight on the different phases of the impact event considering the inter-laminar damage formation and evolution.     

Experimental analysis of functional stability of sagittal split ramus osteotomies secured by miniplates and position screws

PURPOSE: This study determined the relative functional stabilities of various miniplate systems and configurations used to stabilize sagittal split ramus osteotomies (SSROs) and compared them with conventional internal screw fixation. MATERIALS AND METHODS: The biomechanical model was a reproducible prototype of a mandible sagittal osteotomy with consistent material and geometric properties. After advancing the distal segment by 7 mm, each set of mandible analogs (1 set = 3 analogs) was fixed bilaterally by one of three miniplate systems applied in various configurations, and tested with and without a supplemental 2.4-mm bicortical screw applied in the retromolar region. Reduced analogs were placed in a straining frame, and simulated masticatory loads were applied alternatively to the mandibular first molars. Ensuing osteotomy site displacements were measured by transducers attached to a computer-based data acquisition program. A coordinate transformation procedure was used to convert the component displacements captured by the individual transducers into a common "instability factor" to reflect fixation stability for each construct and loading condition. Instability factors for the individual constructs were compared with each other and with those obtained from analogs reduced exclusively with 2.4-mm position screws. RESULTS: Osteotomies stabilized with a combination of miniplates and position screws were more stable than those stabilized exclusively with miniplates (P < .0001). Post-hoc comparisons of mean instability factors (Dunnet's method) showed the miniplate-position screw combinations to be more stable than the 2.4-mm position screw system used as standard (P < .05). Miniplate systems alone were the least stable of the test constructs, with differential rates of failure between the individual miniplate systems. CONCLUSIONS: Exclusive use of miniplate fixation may not provide the consistent stability necessary for early functional restoration after SSROs. The addition of a position screw in the retromolar region substantially enhances the fixation stability of miniplate systems. The use of miniplates with retromolar position screws offers both technical and stability advantages over conventional miniplate or internal screw fixation. The fixation stability of the miniplate-position screw combination is independent of the type of miniplate system used.