NICE—An explicit numerical scheme for efficient integration of nonlinear constitutive equations

The paper presents a simple but efficient new numerical scheme for the integration of nonlinear constitutive equations. Although it can be used for the integration of a system of algebraic and differential equations in general, the scheme is primarily developed for use with the direct solution methods for solving boundary value problems, e.g. explicit dynamic analysis in ABAQUS/Explicit. In the developed explicit scheme, where no iteration is required, the implementation simplicity of the forward-Euler scheme and the accuracy of the backward-Euler scheme are successfully combined. The properties of the proposed NICE scheme, which was also implemented into ABAQUS/Explicit via User Material Subroutine (VUMAT) interface platform, are compared with the properties of the classical forward-Euler scheme and backward-Euler scheme. For this purpose two highly nonlinear examples, with the von Mises and GTN material model considered, have been studied. The accuracy of the new scheme is demonstrated to be at least of the same level as experienced by the backward-Euler scheme, if we compare them on the condition of the same CPU time consumption. Besides, the simplicity of the NICE scheme, which is due to implementation similarity with the classical forward-Euler scheme, is its great Advantage.     

Optimization of safety equipment outages improves safety

Testing and maintenance activities of safety equipment in nuclear power plants are an important potential for risk and cost reduction. An optimization method is presented based on the simulated annealing algorithm. The method determines the optimal schedule of safety equipment outages due to testing and maintenance based on minimization of selected risk measure. The mean value of the selected time dependent risk measure represents the objective function of the optimization. The time dependent function of the selected risk measure is obtained from probabilistic safety assessment, i.e. the fault tree analysis at the system level and the fault tree/event tree analysis at the plant level, both extended with inclusion of time requirements. Results of several examples showed that it is possible to reduce risk by application of the proposed method. Because of large uncertainties in the probabilistic safety assessment, the most important result of the method may not be a selection of the most suitable schedule of safety equipment outages among those, which results in similarly low risk. But, it may be a prevention of such schedules of safety equipment outages, which result in high risk. Such finding increases the importance of evaluation speed versus the requirement of getting always the global optimum no matter if it is only slightly better that certain local one.     

Recombination and loss mechanisms in low-threshold InAs-GaAs 1.3-/spl mu/m quantum-dot lasers

We show that even in quantum-dot (QD) lasers with very low threshold current densities (J/sub th/=40--50 A/cm/sup 2/ at 300 K), the temperature sensitivity of the threshold current arises from nonradiative recombination that comprises /spl sim/60% to 70% of J/sub th/ at 300 K, whereas the radiative part of J/sub th/ is almost temperature insensitive. The influence of the nonradiative recombination mechanism decreases with increasing hydrostatic pressure and increasing band gap, which leads to a decrease of the threshold current. We also studied, for the first time, the band gap dependence of the radiative part of J/sub th/, which in contrast increases strongly with increasing band gap. These results suggest that Auger recombination is an important intrinsic recombination mechanism for 1.3-/spl mu/m lasers, even in a very low threshold QD device, and that it is responsible for the temperature sensitivity of the threshold current.     

About malicious software in smartphones

Phones with some of the capabilities of modern computers also have the same kind of drawbacks. These phones are commonly referred to as smartphones. They have both phone and personal digital assistant (PDA) functionality. Typical to these devices is to have a wide selection of different connectivity options from general packet radio service (GPRS) data transfer to multi media messages (MMS) and wireless local area network (WLAN) capabilities. They also have standardized operating systems, which makes smartphones a viable platform for malware writers. Since the design of the operating systems is recent, many common security holes and vulnerabilities have been taken into account during the design. However, these precautions have not fully protected these devices. Even now, when smartphones are not that common, there is a handful of viruses for them. In this paper we will discuss some of the most typical viruses in the mobile environment and propose guidelines and predictions for the future.     

Microstructural, XRD and electrical characterization of some thick film resistors

The microstructural and electrical characteristics (sheet resistivities, TCRs, and noise indices) of some 1 k/sq. and 10 k/sq. thick films were evaluated. The conductive phase was determined by X-ray diffraction (XRD) analysis. The microstructures of fired resistors were investigated by scanning electron microscopy (SEM) and analyzed by energy dispersive spectrometry (EDS). Some resistors were fired for a relatively long time at the highest temperature, i.e., 6 h at 850 °C, to allow the reactions in the material to reach equilibria. Sheet resistivities, temperature coefficients of resistivity, and noise indices of these resistors were compared with normally (10 min at 850 °C) fired resistors. After 6 h firing absolute temperature coefficient of resistivity (TCR) values of most resistors increased significantly, while sheet resistivities decreased. Complex impedance analysis showed that in most cases resistors with low noise indices showed nearly ideal resistor response while those with higher noise had a larger imaginary part.     

A Comparision of the Number of Rational Places of Certain Function Fields to the Hasse-Weil Bounds

We give explicitly the number of rational places of certain function fields in terms of the reciprocals of the zeros of the function fields in question. The results are then compared with the Hasse-Weil bounds by using the approximation theorems of Dirichlet and Kronecker and it turns out that in many of these function fields the number of rational places is near the upper Hasse-Weil bound. Keywords:Function fields, Diophantine approximation, Exponential sums.     

2,5-Dihydroxybenzoic acid butylamine and other ionic liquid matrixes for enhanced MALDI-MS analysis of biomolecules

The performance of the new ionic liquid MALDI-MS matrix 2,5-dihydroxybenzoic acid butylamine (DHBB) was assessed and compared to results obtained with the ionic liquid MALDI-MS matrixes alpha-cyano-4-hydroxycinnamic acid butylamine (CHCAB), 3,5-dimethoxycinnamic acid triethylamine (SinTri), and the frequently used solid MALDI matrixes 2,5-dihydroxybenzoic acid (DHB) and alpha-cyano-4-hydroxycinnamic acid (CHCA). The vacuum-stable, liquid consistency of ionic liquid matrix sample preparations considerably enhanced MALDI-MS analysis in terms of shot-to-shot reproducibility. Consequently, relative standard deviations serving as a measure for reproducibility of intensity-values acquired from 90 different spots on one MALDI-MS preparation were approximately one-half as high when solid DHB was replaced by the ionic liquid DHBB and eight times lower after exchange of solid CHCA by ionic liquid CHCAB. Interestingly, the ionic liquid MALDI matrix DHBB conserved the broad applicability of its solid analogue DHB, reduced MALDI induced fragmentation of monosialylated glycans and gangliosides, and was the superior ionic liquid matrix for MALDI-MS analysis of oligosaccharides and polymers, such as poly(ethylene glycol). It also worked well with glycoconjugates, peptides, and proteins; however, the tendency of DHBB to form multiple alkali adduct ions with peptides and proteins made CHCAB the ionic liquid matrix of choice for peptides. SinTri was the best ionic liquid matrix for proteins of high molecular weight, such as IgG. Furthermore, it was demonstrated for the first time that solvent properties and MALDI matrix properties of ionic liquids, such as DHBB, can be combined to enable fast, direct screening of an enzymatic reaction. This was proven by the desialylation of sialylactose with sialidase from Clostridium perfringens in the presence of diluted aqueous DHBB and subsequent direct MALDI-MS analysis of the reaction mixture.     

Coupling of light from an LED into a thin light guide by diffractive gratings

Ring-shaped and radial diffractive gratings are designed with rigorous diffraction theory to couple light of a nearly monochromatic LED into a thin planar light guide on the bottom side. The theoretical coupling efficiencies for ring-shaped and radial gratings are 41% and 66%, respectively. Optimized diffractive elements are manufactured with direct electron-beam lithography and reactive-ion-etching into SiO2 substrates. Good agreement between experimental and theoretical results for selected radial gratings is reached. Furthermore, the mass production tests using injection molding are carried out with good replicability.     

Theoretical and Empirical Analysis of ReliefF and RReliefF

Relief algorithms are general and successful attribute estimators. They are able to detect conditional dependencies between attributes and provide a unified view on the attribute estimation in regression and classification. In addition, their quality estimates have a natural interpretation. While they have commonly been viewed as feature subset selection methods that are applied in prepossessing step before a model is learned, they have actually been used successfully in a variety of settings, e.g., to select splits or to guide constructive induction in the building phase of decision or regression tree learning, as the attribute weighting method and also in the inductive logic programming.A broad spectrum of successful uses calls for especially careful investigation of various features Relief algorithms have. In this paper we theoretically and empirically investigate and discuss how and why they work, their theoretical and practical properties, their parameters, what kind of dependencies they detect, how do they scale up to large number of examples and features, how to sample data for them, how robust are they regarding the noise, how irrelevant and redundant attributes influence their output and how different metrics influences them.     

Electrical properties and chemical compatibility of PZT thick film on Ni substrates

The characteristics of Pb(Zr,Ti)O₃(PZT) thick films that were printed and fired on Ni substrates were studied. The dielectric characteristics of samples sintered at 850°C on Ni substrates could not be measured due to the formation of a NiO layer at the Ni/PZT interface. The scanning electron microscope and energy dispersive X-ray analysis of cross-sections of the PZT thick films on Ni substrates, and of a mixture of PZT and NiO powders, fired at 850°C, did not indicate the formation of secondary phases. However, the transmission electron microscopy showed around 8% solid solubility of NiO in the PZT. A new structure with a prefired, Au thick-film layer was designed in order to prevent the diffusion of the NiO to the PZT layer during sintering. The dielectric properties of the PZT layers printed and fired on the Ni substrates with the prefired Au electrode were significantly better than those of the layers on the uncoated substrate, the dielectric losses decreased from 0.23 to 0.05.