A microfluidic optical beam steerer

This paper reports the fabrication and characterization of a prototype microfluidic device that can act as a periodic beam steerer. The prototype is formed by a simple T-junction followed by a serpentine channel that allows generation of a periodical segmented flow of air and water bubbles. If light hits the channel wall with a suitable angle, it can be either transmitted or reflected by the segmented flow, giving rise to an alternating beam steerer. The duty cycle, switching frequency, and overall stability and reproducibility of this prototype system are presented and discussed.     

Formulations for an inventory routing problem

In this paper, we present and compare formulations for the inventory routing problem (IRP) where the demand of customers has to be served, over a discrete time horizon, by capacitated vehicles starting and ending their routes at a depot. The objective of the IRP is the minimization of the sum of inventory and transportation costs. The formulations include known and new mathematical programming formulations. Valid inequalities are also presented. The formulations are tested on a large set of benchmark instances. One of the most significant conclusions is that the formulations that use vehicle‐indexed variables are superior to the more compact, aggregate formulations.     

Effect of imidization temperature on properties of polymide films

Some mechanical and electrical properties of the BPDA/ODA/PDA polyimide film prepared on mylar followed by various cure schedules have been studied. It has been found by FTIR that the imidization reaches its maximum after a 200°C cure schedule for this polyimide. However, the optimum condition of curing is a 350°C cure schedule. Following this cure schedule, one can obtained a polymide film with good mechanical and electrical properties. © 1993 John Wiley & Sons, Inc.     

Health benefits of CLA – lessons from pig models in biomedical research

The objective of this review is to highlight the use of pig models for investigating safety, efficacy and the mechanisms of action of conjugated linoleic acid (CLA). Although CLA elicits positive effects in animal models and in vitro systems, a consistent concern in terms of translational research is that the health benefits observed by using these model systems cannot be extrapolated directly into humans. Conversely, the similarities between pigs and humans make the pig an ideal model for examining the health benefits of dietary supplements, functional foods and nutraceuticals. We have developed pig models of viral and bacterial infection to examine the preventive role of dietary CLA supplementation on virally induced immunosuppression and gut health, respectively. Results from these studies indicate that CLA significantly enhances the immune function while limiting the catabolic effects of uncontrolled immune and inflammatory responses. The scientific findings in pig models and human clinical trials demonstrate that CLA modulates immune responses in pigs and humans. Pig models of immunomodulation represent significant improvements over other animal models and in vitro systems because they mimic more closely the compartmentalization of the human immune system and the clinical presentation of human infectious, immune and inflammatory diseases.     

Moisture absorption behavior of rubber‐modified epoxy resins

The moisture absorption behavior of diglycidyl ether of bisphenol A/ethylene diamine resins incorporating a carboxy‐terminated butadiene–acrylonitrile rubber was investigated and associated with their morphology of phase separation. Although the diffusion coefficient of moisture was increased with the rubber content, its activation energy and free volume for moisture diffusion were barely changed until phase inversion occurred. After phase inversion, the free volume was significantly increased, and the activation energy decreased. In addition, the moisture absorption also reduced the β‐transition temperature of the resins and slightly increased the glass‐transition temperature before phase inversion. However, the reverse was found after phase inversion. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3718–3724, 2002     

Nanoscratch testing to assess the fiber adhesion of short‐carbon‐fiber composites

In a composite material, the degree of adhesion between the fiber and the matrix plays an important role in the overall performance of the material. Because the load between the fiber and the matrix is realized throughout the interphase region material, a lot of effort has gone into characterizing the strength of the interphase. In this study, nanoscratch tests on the composite samples were used to provide a relative measure of adhesion in different composite materials. Carbon‐filled nylon 6,6 and polycarbonate resins were evaluated with this method. The carbon fillers we used were polyacrylonitrile‐based carbon fibers sized and surface‐treated for the respective matrix and pitch‐based carbon fibers without any sizing or surface treatment. Tensile and X‐ray photoelectron spectroscopy data for the composites we considered are also presented to compare to the nanoscratch results. It is shown that nanoscratch testing on the composites, with the proposed data analysis, can be an effective tool for determining the relative degree of adhesion between different composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 328–335, 2007     

Maceral and rank influences on the morphology of coal char

Concentrates of vitrinite and inertinite macerals have been pyrolysed in a flame under conditions representative of the initial stages of pulverized coal combustion. Char was distinguished from soot by size analysis and the char yield correlated with the proximate analysis. The char morphology was studied by optical microscopy and quantitative measurements of porosity and pore size were made using image analysis. Vitrinite and inertinite produce chars of characteristic morphology. The softening behaviour of inertinite varies with coal rank and can be related to the optical reflectance. The porosity of vitrinite chars approaches that of inertinite chars at high rank.     

Spectroscopic and electrical properties of 3-alkyl pyrrole-pyrrole copolymers

Three types of copolymers composed of pyrrole and 3-alkyl pyrroles (with alkyl being pentyl, nonyl and undecyl) have been synthesized. A strong linear dependency of the alkyl chain length on the as-prepared copolymer physical properties is demonstrated via (a) DSC (for phase transition temperatures and enthalpy changes) and (b) UV-vis (for wavelengths of the polaronic and bipolaronic electronic transitions, and ratio of the corresponding absorbances). A trend in the copolymers' doping level vs alkyl chain length is also estimated, via IR, by taking the ratio of band intensities of the stretching modes of the polaronic and bipolaronic species. The copolymers are found to be soluble in organic solvents and their solutions can be cast onto glass substrates or metals resulting in thin films, which can be used as the electroactive component of Schottky diodes. The electrical properties of these diodes are also found to be dependent on increasing 3-alkyl chain length.     

Synergistic Sex Pheromone Components of White-Spotted Tussock Moth, Orgyia thyellina

In 1996, the exotic white-spotted tussock moth (WSTM), Orgyia thyellina (Lepidoptera: Lymantriidae), was discovered in Auckland, New Zealand. Because establishment of WSTM would threaten New Zealand's orchard industry and international trade, eradication of WSTM with microbial insecticide was initiated. To monitor and complement eradication of WSTM by capture of male moths in pheromone-baited traps, pheromone components of female WSTM needed to be identified. Coupled gas chromatographic–electroantennographic detection analysis of pheromone gland extract revealed several compounds that elicited responses from male moth antennae. Mass spectra of the two most EAD-active compounds suggested, and comparative GC-MS of authentic standards confirmed, that they were (Z)-6-heneicosen-11-one (Z6–11-one) and (Z)-6-heneicosen-9-one, the latter termed here thyellinone. In field experiments in Japan, Z6–11-one plus thyellinone at a 100:5 ratio attracted WSTM males, whereas either ketone alone failed to attract a single male moth. Addition of further candidate pheromone components did not enhance attractiveness of the binary blend. Through the 1997–1998 summer, 45,000 commercial trap lures baited with 2000 g of Z6–11-one and 100 g of thyellinone were deployed in Auckland towards eradication of the residual WSTM population.Dedicated to my dear mother in honor of her 75th birthday