Motorcycle riders' perception of helmet use: complaints and dissatisfaction

In accidents which involve two-wheeled vehicles the helmet plays a life-saving role, but very little is known about the motorcycle rider's perception of the helmet. We evaluated the relationships between having been involved in an accident and dissatisfaction with the helmet, and between the perception of motorcycle riders and the objective features of the helmet. This was a case-control study: riders of motorized two-wheelers who had been involved in accidents (accident cases) were compared against a similarly interviewed sample of riders that had not been in accidents (control cases). Information about the driver, the vehicle and the helmet was collected in all interviews. To evaluate the relationships, logistic regressions were carried out. The majority of drivers were dissatisfied with their helmets, but no evidence was found to link this dissatisfaction with having been involved in an accident. The two most common complaints related to noisiness, followed by the helmet visor. Complaints did not seem to be statistically associated with physical features of the helmet.     

Interfacial strength and fracture energy of individual carbon nanofibers in epoxy matrix as a function of surface conditions

The interfacial shear strength (IFSS) and fracture energy of individual carbon nanofibers embedded in epoxy were obtained for different surface conditions and treatments by novel, MEMS-based, nanoscale fiber pull-out experiments. As-grown vapor grown carbon nanofibers (VGCNFs) with turbostratic surface and 5 nm peak-to-valley surface roughness exhibited high IFSS and interfacial fracture energy, averaging 106 ± 29 MPa and 1.9 ± 0.9 J/m², respectively. Subsequent high temperature heat treatment and graphitization resulted in drastically reduced IFSS of 66 ± 10 MPa and interfacial fracture energy of 0.65 ± 0.14 J/m². The smaller IFSS values and the reduced standard deviation were due to significant reduction of the fiber surface roughness to 1–2 nm, as well as a decrease in surface defect density during conversion of turbostratic and amorphous carbon to highly ordered graphitic carbon. For both grades of VGCNFs failure was adhesive with clear nanofiber surfaces after debonding. Oxidative functionalization of high temperature heat-treated VGCNFs resulted in much higher IFSS of 189 ± 15 MPa and interfacial fracture energy of 3.3 ± 1.0 J/m². The debond surfaces of functionalized nanofibers had signs of matrix residue and/or shearing of the outer graphitic layer of the VGCNFs, namely the failure mode was a combination of cohesive matrix and/or cohesive fiber failure which contributed to the high IFSS. For all three grades of VGCNFs the IFSS was independent of fiber length and diameter. The findings of this experimental study emphasized the critical role of nanofiber surface morphology and chemistry in determining the shear strength and fracture energy of nanofiber interfaces, and shed light to prior composite-level strength and fracture toughness measurements.     

Reversibility of electric-field-induced mechanical changes in soft tissues

Recently, ultrasound has been used to study the physiological-level electric-field-induced mechanical changes (EIMC) in general soft biological tissues. Here, we present the experimental results on the dependence of EIMC on the polarity of the applied electric field. We applied an ac voltage source to heart tissues and monitored the amplitude changes and time shifting of the ultrasound echoes. The shifting of the echoes was decomposed into a trend component and a fluctuation (feature) component. The changes in amplitude and the fluctuation component of the time shift, but not the trend component of the time shift, can be mostly reversed by reversing the polarity of the applied voltage. The polarity-dependence study reveals two different mechanisms underlying EIMC.     

Heparin Antagonism by Polyvalent Display of Cationic Motifs on Virus‐Like Particles

Particles to the rescue! The construction of cationic amino acid motifs on the surface of bacteriophage Qβ by genetic engineering or chemical conjugation gives particles that are potent inhibitors of the anticoagulant action of heparin, which is a common anticlotting agent subject to clinical overdose.

     

N‐(hydroxymethyl) acrylamide as a multifunctional finish to cotton and a tether for grafting methacrylamide for biocidal coatings

N‐(hydroxymethyl) acrylamide (NMA) was immobilized on cotton surfaces through etherification, and then methacrylamide (MA) was grafted onto the treated surface. The coatings were characterized by ATR‐IR spectroscopy and were rendered biocidal upon exposure to dilute household bleach. The treated fabrics were challenged with Gram‐negative and Gram‐positive bacteria; both NMA and NMA/MA‐treated fabrics inactivated about 8 logs of Escherichia coli O157:H7 and Staphylococcus aureus within only 5 min of contact time. The coatings were also quite stable toward ultraviolet (UVA) light exposure and repeated laundering. Moreover, a substantial improvement in wrinkle recovery angle was obtained for the NMA/MA‐treated fabrics. The new acyclic acrylamide N‐halamine coating should be less expensive to produce and use than previous cyclic N‐halamine coatings developed in these laboratories. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Backpressure scheduling in IEEE 802.11 wireless mesh networks: Gap between theory and practice

Achieving efficient bandwidth utilization in wireless networks requires solving two important problems: (1) which packets to send (i.e., packet scheduling) and (2) which links to concurrently activate (i.e., link scheduling). To address these scheduling problems, many algorithms have been proposed and their throughput optimality and stability are proven in theory. One of the most well-known scheduling algorithms is backpressure scheduling which performs both link and packet scheduling assuming a TDMA (Time Division Multiple Access) MAC (Medium Access Control) layer. However, there has been limited work on realizing backpressure scheduling with a CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) MAC layer (e.g., IEEE 802.11). In IEEE 802.11 networks, it is expected that the throughput optimality will not be achieved. In this paper, we investigate the extent of this throughput gap between theoretical TDMA-based backpressure scheduling and an approximation of it for IEEE 802.11 WMNs (Wireless Mesh Networks). Through extensive testbed measurements, we verify that there is indeed a non-negligible throughput gap. We present two main reasons behind this gap: Control inaccuracy that results from approximation of link scheduling and information inaccuracy that results from late or incorrect information, for instance, about queue lengths or network topology. Our results show that losses by MAC-layer collisions and backoff, which mainly occur due to control inaccuracy plays a major role for the throughput gap. On the other hand, while losses by queue drops, typically due to information inaccuracy, do occur, their effect can be tolerated. Nevertheless, both types of inaccuracies need to be mitigated in order to improve throughput.     

Bit Interleaved Coded Multiple Beamforming

In this paper, we investigate the performance of bit-interleaved coded multiple beamforming (BICMB). We provide interleaver design criteria such that BICMB achieves full spatial multiplexing of min( N, M) and full spatial diversity of NM with N transmit and M receive antennas over quasi-static Rayleigh flat fading channels. If the channel is frequency selective, then BICMB is combined with orthogonal frequency division multiplexing (OFDM) (BICMB-OFDM) in order to combat ISI caused by the frequency-selective channels. BICMB-OFDM achieves full spatial multiplexing of min(N, M), while maintaining full spatial and frequency diversity of NML for an NtimesM system over L-tap frequency-selective channels when an appropriate convolutional code is used. Both systems analyzed in this paper assume perfect channel state information both at the transmitter and the receiver. Simulation results show that, when the perfect channel state information assumption is satisfied, BICMB and BICMB-OFDM provide substantial performance or complexity gains when compared to other spatial multiplexing and diversity systems.     

Effects of project size and resource constraints on project duration through priority rule-base heuristics

Priority rules are one of the frequently used methods in project programming with resource-constraints. In this paper, the effects of project size and number of resource constraints on project duration are compared to the performances of pre-selected priority rules. Ten projects in different sizes have been programmed with 3, 5, 7, 9, and 11 limited-resource conditions by means of MRPL (Maximum Remaining Path Length), LFT (Latest Finish Time), MNSLCK (Minimum Slack Time), EFT (Earliest Finish Time), and LST (Latest Start Time) priority rules. When the number of resource constraints is low, the performance of MRPL is generally observed to be higher. As the number of resource constraints increases, a decrease in the performance of MRPL is observed in contrast with an increase in the performance of LFT.     

Effect of Co Content Upon the Bulk Structure of Sr- and Co-doped LaFeO3

The bulk structure was investigated for Fe-based perovskite-type oxides with the formula La_0.6Sr_0.4Co_yFe_1−yO_3−δ (y = 0.1, 0.2, and 0.3). The materials were confirmed to be stoichiometric with respect to oxygen under ambient conditions and the structural features were then further characterized under different environments as a function of temperature. Under reducing atmospheres, the degree of reduction increased with Co content, suggesting the presence of preferential oxidation of Fe over Co. Under milder conditions, oxygen vacancy formation was not proportional to Co content, which was likely caused by an electronic structure transition. The unit cell parameters were also shown to strongly depend upon Co content, temperature, and environment. A rhombohedral to cubic transition occurred at lower temperatures for higher Co content, but showed less dependence upon environment. A change in the thermal expansion behavior occurred at the temperature where oxygen vacancies formed leading to two regions of linear thermal expansion. The use of lattice parameters compared to dilatometry allowed for the simultaneous monitoring of unit cell symmetry and expansion behavior so the link between thermal properties and unit cell symmetry could be firmly established.     

Investigating the Effectiveness of Certain Priority Rules on Resource Scheduling of Housing Estate Projects

The heuristic method is one of the methods used for the scheduling of resource-constrained projects. This method is commonly used in programming the projects with high number of activities and resources such as construction investments. This paper investigates the effectiveness of three heuristic method priority rules applied in the resource scheduling of ten Turkish housing estate projects which were scheduled according to three preselected priority rules [maximum remaining path length (MRPL), latest finish time (LFT), and minimum slack time (MNSLCK)] in resource-constrained conditions. The performance of each priority rule was evaluated in relation to the duration of the project. The results revealed that MRPL priority reduced the project duration to minimum in six projects, whereas LFT priority yielded the best duration results in three projects and MNSLCK priority in only one project.