Effect ofθ-alumina formation on the growth kinetics of alumina-forming superalloys

Alumina-forming ODS superalloys are excellent oxidation-resistant materials. Their resistance relies upon the establishment of a stable, slow-growing, and adherent -alumina. In the present investigation, these alloys exhibited unstable and relatively less adherent -alumina phase, which increased the oxidation rate in the transient stage and converted into -alumina in the later part of the exposure. The oxide-growth process was found to depend upon various parameters such as temperature, time, and presence of an active elecment in the superalloy. Characterization carried out by XRD, SEM/EDAX, and AES on oxidized ODS and non-ODS alloys demonstrated a significant influence of the active element, Y, on the transformation of - to -alumina. SIMS analysis of two-stage oxidation at 900°C for two different durations evidently showed that the change in the transport process is due to -to--alumina transformation. On the basis of these results, a new and consistent mechanism is proposed to explain the influence of -alumina and its transformation on growth kinetics and the effect of yttrium on the transformation leading to good scale adherence and oxidation resistance.     

Pyramid coding based rate control for constant bit rate video streaming

In this paper, a novel pyramid coding based rate control scheme is proposed for video streaming applications constrained by a constant channel bandwidth. To achieve the target bit rate with the best quality, the initial quantization parameter (QP) is determined by the average spatio-temporal complexity of the sequence, its resolution and the target bit rate. Simple linear estimation models are then used to predict the number of bits that would be necessary to encode a frame for a given complexity and QP. The experimental results demonstrate that the proposed rate control scheme significantly outperforms the existing rate control scheme in the Joint Model (JM) reference software in terms of Peak Signal to Noise Ratio (PSNR) and consistent perceptual visual quality while achieving the target bit rate. Finally, the proposed scheme is validated through experimental evaluation over a miniature test-bed.

     

Reputation based probabilistic resource allocation for avoiding free riding and formation of common interest groups in unstructured P2P networks

Free riding is a major problem in peer-to-peer networks. Reputation management systems are generally employed to overcome this problem. In this paper, a new reputation based scheme called probabilistic resource allocation is proposed. This strategy probabilistically decide whether to provide the resource to requesting peer or not. Aforesaid method gives selection preference to higher reputation peers and at the same time provides some finite probability of interaction between those peers who don’t have good reputation about each other. This avoids disconnection between the aforesaid peers. The proposed scheme also introduces a new mechanism for resource distribution which not only allocates resources based on peers’ reputation but simultaneously maximizes network utility also. Algorithm for formation of interest groups based upon both similarity of interests and reputation between peers is also presented.     

Generic and efficient framework for search trees on flash memory storage systems

Tree index structures are crucial components in data management systems. Existing tree index structure are designed with the implicit assumption that the underlying external memory storage is the conventional magnetic hard disk drives. This assumption is going to be invalid soon, as flash memory storage is increasingly adopted as the main storage media in mobile devices, digital cameras, embedded sensors, and notebooks. Though it is direct and simple to port existing tree index structures on the flash memory storage, that direct approach does not consider the unique characteristics of flash memory, i.e., slow write operations, and erase-before-update property, which would result in a sub optimal performance. In this paper, we introduce FAST (i.e., Flash-Aware Search Trees) as a generic framework for flash-aware tree index structures. FAST distinguishes itself from all previous attempts of flash memory indexing in two aspects: (1) FAST is a generic framework that can be applied to a wide class of data partitioning tree structures including R-tree and its variants, and (2) FAST achieves both efficiency and durability of read and write flash operations through memory flushing and crash recovery techniques. Extensive experimental results, based on an actual implementation of FAST inside the GiST index structure in PostgreSQL, show that FAST achieves better performance than its competitors.     

Interest point detection using imbalance oriented selection

Interest point detection has a wide range of applications, such as image retrieval and object recognition. Given an image, many previous interest point detectors first assign interest strength to each image point using a certain filtering technique, and then apply non-maximum suppression scheme to select a set of interest point candidates. However, we observe that non-maximum suppression tends to over-suppress good candidates for a weakly textured image such as a face image. We propose a new candidate selection scheme that chooses image points whose zero-/first-order intensities can be clustered into two imbalanced classes (in size), as candidates. Our tests of repeatability across image rotations and lighting conditions show the advantage of imbalance oriented selection. We further present a new face recognition application—facial identity representability evaluation—to show the value of imbalance oriented selection.     

Chemical-bath deposition of band-gap-tailored CdxPb1−xS films

An attempt was made to modify the band gap of CdS ( 2.4 eV) by preparing a mixed lattice with a low-band-gap material, PbS (0.3 eV), giving a new set of materials, Cd _x Pb_1–x S. Band gaps as low as 1.9 eV were achieved with increasing x. The preparation of Cd _x Pb_1–x S was carried out by chemical-bath deposition. Structural characterization studies using X-ray diffraction (XRD), energy dispersion analysis by X-rays (EDAX), and optical microscopy were performed. The optical-absorption studies used to find the band gap are also described.     

Computer modelling of porous silicon formation

Porous silicon formation has been simulated by the finite diffusion length (FDL) model. This considers a dynamic isoconcentration profile from which the aggregating particles begin their random walks. In this paper we report on the isoconcentration profile non-uniformities which increase as the finite diffusion length is increased. The implementation of the FDL model with zero diffusion length generates non-fractal structures with a fractal dimension close to 1. It is found that Eden clusters cannot be generated at zero diffusion length, due to the problem of sinking isoconcentration profile. We conclude that these are limitations that should be considered in the FDL model for improving the understanding of physical phenomena such as formation and morphology of porous silicon.     

Fast Ion Transport in Li-Rich Alloy Anode for High-Energy-Density All Solid-State Lithium Metal Batteries

All-solid-state Li batteries (ASSLBs) with solid-polymer electrolytes are considered promising battery systems to achieve improved safety and high energy density. However, Li dendrite formation at the Li anode under high charging current density/capacity has limited their development. To tackle the issue, Li-metal alloying has been proposed as an alternative strategy to suppress Li dendrite growth in ASSLBs. One drawback of alloying is the relatively lower operating cell voltages, which will inevitably lower energy density compared to cells with pure Li anode. Herein, a Li-rich Li₁₃In₃ alloy electrode (LiRLIA) is proposed, where the Li₁₃In₃ alloy scaffold guides Li nucleation and hinders Li dendrite formation. Meanwhile, the free Li can recover Li's potential and facilitate fast charge transfer kinetics to realize high-energy-density ASSLBs. Benefitting from the stronger adsorption energy and lower diffusion energy barrier of Li on a Li₁₃In₃ substrate, Li prefers to deposit in the 3D Li₁₃In₃ scaffold selectively. Therefore, the Li–Li symmetric cell constructed with LiRLIA can operate at a high current density/capacity of 5 mA cm⁻²/5 mAh cm⁻² for almost 1000 h.     

Throughput analysis in censoring-based cooperative cognitive radio network with energy harvesting

An energy harvesting (EH) and cooperative cognitive radio (CR) network (CRN) is studied in this paper where CR users transmit data through a primary user (PU) channel if the channel remains idle, else an optimal number CRs helps in transmission of PU. To achieve the optimum number of CRs (ONCR) involved in cooperation, a novel scheme based on a combination of channel censoring and total error is proposed. The performance of the proposed scheme is investigated under RF harvesting scenario. The EH is dependent on sensing decision and a CR source harvests energy from PU's RF signal. The harvested energy (HE) is split into two parts: One part is used by the CR network (CRN) for its own transmission, and the other part is used for supporting PU. The effect of the energy allocation factor on total throughput is also investigated. New expressions for optimal number of CRs and throughput are developed. The effect of network parameters such as sensing time, censoring threshold, and energy allocation parameter (EAP) on throughput is investigated. Impact of distance between nodes is also studied.