The potential applications and advantages of powering solar air-conditioning systems using concentrator augmented solar collectors

Non-concentrated evacuated tube heat pipe solar collectors have been reported to show higher fluid temperatures with improved thermal performance in the low to medium temperature range (?60 °C) due to low heat losses but suffer higher heat losses at the medium to higher temperature range (?80 °C) which reduces their efficiency compared to concentrated evacuated tube heat pipe solar collectors. To operate as stand-alone systems capable of attaining temperatures in the range of 70-120 °C, an innovative concentrator augmented solar collector can be an attractive option. The performance of a combined low-concentrator augmented solar collector in an array of evacuated tube heat pipe solar collectors defined as concentrator augmented evacuated tube heat pipe array (CAETHPA) and an array of evacuated tube heat pipe collectors (ETHPC) were tested and compared and results presented in this paper. The analysis of the experimental data allows concluding that the use of a CAETHPA is a more efficient alternative for integrating renewable energy into buildings with higher fluid temperature response, energy collection and lower heat loss coefficient compared to the use of evacuated tube heat pipe collector array (ETHPA).     

Stability of wood fast pyrolysis oil

This study evaluates the effects of storage conditions on physical and chemical properties of biomass fast pyrolysis oils exposed to elevated temperatures over extended periods of time. It was performed on oak pyrolysis oil generated in the NREL vortex reactor. Oil samples were stored at three temperatures: 37, 60 and 90°C in glass vessels. Properties of the oils were measured after hours of storage at 90°C, and after days or weeks at lower temperatures. Chemical changes in the oils were measured using GPC (molecular weight distribution) and FTIR spectroscopy. The oil remained a single phase throughout the studied conditions. Its pH was not affected by storage. The water content, viscosity and molecular weight of the oil increased with the time and temperature of storage. First-order reaction kinetics were successfully used to predict changes in molecular weight of the stored oil. FTIR provided evidence that etherification or esterification are mechanisms for condensation of the oil during storage.     

Resting frontal EEG asymmetry as an endophenotype for depression risk: Sex-specific patterns of frontal brain asymmetry.

Resting frontal electroencephalographic (EEG) asymmetry has been hypothesized as a marker of risk for major depressive disorder (MDD), but the extant literature is based predominately on female samples. Resting frontal asymmetry was assessed on 4 occasions within a 2-week period in 306 individuals aged 18–34 (31% male) with (n = 143) and without (n = 163) lifetime MDD as defined by the Diagnostic and Statistical Manual of Mental Disorders, 4th edition (American Psychiatric Association, 1994). Lifetime MDD was linked to relatively less left frontal activity for both sexes using a current source density (CSD) reference, findings that were not accounted for solely by current MDD status or current depression severity, suggesting that CSD-referenced EEG asymmetry is a possible endophenotype for depression. In contrast, results for average and linked mastoid references were less consistent but demonstrated a link between less left frontal activity and current depression severity in women. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Managing uncertainty and discontinuous condition numbers in geometric computation

We consider operations on subdivision surfaces under the strict robustness requirement that these floating-point computations return an object with the same topological form as the true solution. The problems involved may however be ill-conditioned, and defined in terms of uncertain data, and even supplementary interval arithmetic may not ensure robustness. Trapping mechanisms are therefore proposed to resolve this difficulty.     

Effect of Laser Processing Parameters on the Formation of Intermetallic Compounds in Fe-Al Dissimilar Welding

Fusion welding of steel to aluminum is difficult due to formation of different types of Fe-Al intermetallics (IMs). In this work, 2 mm-thick steel was joined to 6 mm aluminum in overlap configuration using a 8 kW CW fiber laser. A defocused laser beam was used to control the energy input and allow melting of the aluminum alone and form the bond by wetting of the steel substrate. Experimentally, the process energy was varied by changing the power density (PD) and interaction time separately to understand the influence of each of these parameters on the IM formation. It was observed that the IM formation is a complex function of PD and interaction time. It was also found that the mechanical strength of such joint could not be simply correlated to the IM layer thickness but also depends on the area of wetting of the steel substrate by molten aluminum. In order to form a viable joint, PD needs to be over a threshold value where although IM growth will increase, the strength will be better due to increased wetting. Any increase in interaction time, with PD over the threshold, will have negative effect on the bond strength.     

Non-linear unit root properties of crude oil production

While there is good reason to expect crude oil production to be non-linear, previous studies that have examined the stochastic properties of crude oil production have assumed that crude oil production follows a linear process. If crude oil production is a non-linear process, conventional unit root tests, which assume linear and systematic adjustment, could interpret departure from linearity as permanent stochastic disturbances. The objective of this paper is to test for non-linearities and unit roots in crude oil production. To realize our objective, this study applies a threshold autoregressive model with an autoregressive unit root to monthly crude oil production for 17 OPEC and non-OPEC countries over the period January 1973 to December 2007. Specifically, first we test for the presence of non-linearities (threshold effects) in the production of crude oil in two regimes. Second, we test for a unit root against a non-linear stationary process in two regimes and a partial unit root process when the unit root is present in one regime only. We find that crude oil production is characterized by threshold effects. We find that for eleven of the countries a unit root was present in both regimes, while for the others a partial unit root was found to be present in either the first regime or second regime.     

On the power of deep pushdown stacks

Inspired by recent work of Meduna on deep pushdown automata, we consider the computational power of a class of basic program schemes, NPSDS _s , based around assignments, while-loops and non-deterministic guessing but with access to a deep pushdown stack which, apart from having the usual push and pop instructions, also has deep-push instructions which allow elements to be pushed to stack locations deep within the stack. We syntactically define sub-classes of NPSDS _s by restricting the occurrences of pops, pushes and deep-pushes and capture the complexity classes NP and PSPACE. Furthermore, we show that all problems accepted by program schemes of NPSDS _s are in EXPTIME.     

Design Guidelines for Polyethylene Pipe Interface Shear Resistance

Polyethylene pipes are commonly used in pipeline systems. Current methods used to determine the pipe pullout capacity do not consider the effects of diameter changes and cyclic movements that the pipelines may experience. Laboratory tests were performed to study the interface shearing resistance of polyethylene pipes under varying conditions. The tests were performed in a temperature-controlled room, where properties were investigated for thermal variations expected in the field. Two types of tests were performed: pull/push tests and cyclic tests. Test results indicated that reductions in pipe diameter affect the interface shear resistance that develops between the pipe and soil. As the pipe diameter gets smaller, the normal contact stresses at the interface decreases, causing a reduction in the interface shearing resistance directly proportional to the normal stress changes. Cyclic pipe movements also cause significant reduction in pipe pullout resistance. The test results indicated that the polyethylene pipe interface shear resistance can be significantly lower than the one determined using the current methods. This paper presents the test results, findings, and design recommendations for the pullout resistance of buried polyethylene pipes.