Thermomechanical behavior of Ti-Ni shape memory alloy films deposited by DC magnetron sputtering

In this study, thermomechanical properties of titanium-nickel (Ti-Ni) shape memory alloy (SMA) films are investigated in order to derive constitutive relations. Ti-Ni SMA films, deposited by DC magnetron sputtering under controlled film composition, are characterized by uniaxial tensile tests. At room temperature (R.T.), Ti-Ni films having Ti contents less than 50 at% exhibit superelastic behavior, and those having Ti contents greater than 50 at% exhibit shape memory behavior. However, the Ni—53.2 at% Ti film fractured at a tensile strain of 0.8% because of an increase in brittleness with increasing Ti content. At elevated temperatures, Ti-Ni films having Ti contents of 50.2 to 52.6 at% undergo phase change from martensite to austenite. The Young's modulus of the Ti-Ni films depends on temperature at each phase, regardless of film composition. Film composition does, however, affect the measured material constants b_A, b_M, c_A, and c_M. Stress-strain curves calculated from the constructed constitutive equation closely agree with those obtained from tensile tests, for both the martensite and austenite phases. The constitutive equations are expected to find great utility in the design of Ti-Ni film-actuated microelectromechanical systems (MEMS).     

气体辅助法陶瓷薄膜的制备

Ceramics （alumina） coating on sevaral materials has been successfully achieved at room temperature by gas - assisted deposition （ GAD） technique. In the GAD process the alumina powder was accelerated by jet flow with velocity of - 1000 m/s and impaeted to a substrate, thereby a fiat and dense film was deposited up to 10 μm on the substrate without arty additional heating. The crystal structttre of the alumina in an obtained GAD films seemed as amorphous like. The crystalline phase was recovered by post nnnenling at 1 300 ℃ , however, the matrix resulted in a hollow structure.     

Novel screen technology for high‐contrast front‐projection display by controlling ambient‐light reflection

Abstract— One problem with front‐projection displays is that the screen contrast ratio decreases in bright ambient light. In this paper, we propose a new front‐projection display system that incorporates the control of reflection of ambient light in the screen design, providing a high contrast ratio even in a brightly lit room.     

Human-like natural behavior generation based on involuntary motions for humanoid robots

Human behaviors consist of both voluntary and involuntary motions. Almost all behaviors of task-oriented robots, however, consist solely of voluntary motions. Involuntary motions are important for generating natural motions like those of humans. Thus, we propose a natural behavior generation method for humanoid robots that is a hybrid generation between voluntary and involuntary motions. The key idea of our method is to control robots with a hybrid controller that combines the functions of a communication behavior controller and body balancing controllers. We also develop a wheeled inverted pendulum type of humanoid robot, named “Robovie-III”, in order to generate involuntary motions like oscillation. By applying our method to this robot and conducting preliminary experiments, we verify its validity. Experimental results show that the robot generates both voluntary and involuntary motions.     

Progress in viewing‐angle properties of liquid‐crystal displays

Abstract— Viewing‐angle dependences of the contrast ratio and color shift of LCDs have been radically improved as evidenced by the increasing application of LCDs in high‐quality television. This paper describes the concept of optical compensation and the fundamental characteristics of the viewing‐angle property for various LC modes.     

Syndiotactic‐specific radical polymerization of N‐isopropylacrylamide in toluene at low temperatures in the presence of silyl alcohols

The radical polymerization of N‐isopropylacrylamide was carried out in toluene at low temperatures in the presence of silyl alcohols, such as triethylsilanol. Poly(N‐isopropylacrylamide) with a racemo dyad content of 75% was obtained at ? 80 °C with a 4:1 triethylsilanol to monomer ratio loading. NMR analysis suggests that the mechanism for syndiotactic induction, in the presence of silyl alcohols, may be similar to that observed with alkyl alcohols. In this case, a 1:2 complex formation, via hydrogen bonding interactions, leads to the induction of syndiotactic specificity. Copyright © 2012 Society of Chemical Industry     

Evaluating the protective effects of radon inhalation or ascorbic acid treatment after transient global cerebral ischemic injury in gerbils

In this study, we compared the protective effects of radon inhalation and ascorbic acid administration on transient global cerebral ischemic injury in gerbils. Gerbils were treated with radon inhalation (2000 Bq/m³, 24 hours) or ascorbic acid (100, 300, or 500 mg/kg body weight). Then, transient global cerebral ischemia was induced by bilateral occlusion of the common carotid artery. Results showed that the number of damaged neurons was significantly increased in gerbils that underwent ischemia compared with that in control gerbils. However, the number of damaged neurons in gerbils treated with radon or 500 mg/kg of ascorbic acid before ischemia was significantly lower than gerbils who were subjected to ischemia without any pretreatment, and the protective effects of radon inhalation were similar to the effects of administering 500 mg/kg ascorbic acid. The levels of superoxide dismutase (SOD) and total glutathione (t-GSH) in brain tissue were increased to a similar extent by pretreatment with radon inhalation or 500 mg/kg of ascorbic acid. These findings suggested that radon inhalation has a protective antioxidative effect against transient global cerebral ischemic injury similar to 500 mg/kg ascorbic acid treatment.     

WO3/BiVO4 composite photoelectrode prepared by improved auto-combustion method for highly efficient water splitting

We report on the improvement in the water splitting efficiency of a WO₃/BiVO₄ composite photoelectrode by the application of an improved auto-combustion method to the preparation of porous BiVO₄ thin films. The unique feature of this preparation method is the addition of both NH₄NO₃, as a strong oxidizing agent, and an organic additive into BiVO₄ precursor solution. The local decomposition heat of the organic additive and oxidizing agent created a porous film with small, highly crystalline BiVO₄ particles. The photoelectrode has many advantages over existing ones, such as the high light-harvesting efficiency (LHE), a single BiVO₄ phase, the facile access of the holes to the photoelectrode/electrolyte interface, and the ease of water and oxygen diffusion. The maximum incident photon-to-current efficiency (IPCE) was estimated to be 64% (at 440 nm, 1.23 V vs. RHE) and the applied bias photon-tocurrent efficiency (ABPE) reached as high as 1.28%. This ABPE value is highest among all oxide semiconductor photoelectrodes reported previously, except for the case of a stacking photoelectrode system.     

Simulation of a chemical reaction, 2LiH→Li2+H2, driven by doubly excitation

A direct computer simulation of reaction dynamics at the electronic excited states is not easy to perform, because nonadiabatic equations must be solved as a function of time. Here we present a simple simulation to integrate directly the time-dependent Schrödinger equation within the framework of the time-dependent density functional theory (for electrons) coupled with the Newtonian equation of motion (for nuclei). We find that a chemical reaction, 2LiH→Li₂+H₂, takes place by the doubly excitation. Along the reaction, a level crossing occurs automatically between the highest occupied and lowest unoccupied levels. The simulation demonstrates a mechanism for relaxation for the reactions driven by doubly excitation: electronic excited state changes smoothly into the electronic ground state leaving a kinetic energy of the atoms.