Helium gas permeability of montmorillonite/epoxy nanocomposites

Helium gas permeability of silicate clay (montmorillonite) particles/epoxy nanocomposites was examined. The incorporation of increasing amounts of montmorillonite particles reduced the helium gas permeability. Based on Fick’s law, gas permeation behavior of the nanocomposite was evaluated. With the increase of montmorillonite loading, gas diffusivity decreased, while gas solubility increased. Helium diffusion behavior is in agreement to the numerical results based on the Hatta–Taya–Eshelby theory. It has been revealed that dispersion of nanoscale platelets in polymer is effective in improving gas barrier property.     

Properties of novel diallyl phthalate resin modified with sulfur‐containing allyl ester compounds

Sulfur‐containing allyl ester, which reacts with diallyl phthalate (DAP) resin to have allyl groups, was synthesized by the reaction of allyl phthalic acid with bisphenol having sulfur atoms. The sulfur‐containing allyl ester compound was blended with DAP resin to improve the adhesive properties to copper. By modification with sulfur‐containing allyl ester compound, the T‐peel adhesive strength and the lap shear adhesive strength to copper was improved. In particular, the adhesive strength was greatly improved when the resin was modified with the allyl ester compound having a disulfide bond (?S?S?) (DADS). It is concluded that this result is due to the improvement of the interfacial adhesive strength because the sulfur atom was found to be located in the surface of the copper by Fourier transform infrared (FTIR) analysis. The glass transition temperature (T_g) and the thermal decomposition temperature (T_d) of the cured DAP resin modified with DADS slightly decreased with increasing concentration of DADS. The lowering of T_g is because the crosslinking density of the DAP resin modified with DADS is smaller than that of DAP resin. Moreover, from thermogravimetric analysis, the lowering of Td of the DAP resin modified with DADS is because DADS is likely to pyrolyze. © 2013 Society of Chemical Industry     

Production of thin graphite sheets for a high electrical conductivity film by the mechanical delamination of ternary graphite intercalation compounds

Herein we propose a production scheme for conductive films composed of thin graphite sheets with high crystallinity and polymeric resin. The crystalline graphite sheets were successfully produced from natural graphite powder by solution-phase synthesis of graphite intercalation compounds (GICs), following a wet planetary-ball milling under mild conditions. The shear forces in the milling pot lead to a peeling of graphite flakes. Taking into consideration the interlayer bonding force, the delamination should be preferentially done from the expanded GICs interlayer rather than intrinsic graphite one. Some composite films derived from the phenolic resin and flaky graphite sheets displayed much higher electrical conductivities compared to the film from the feed graphite particles. We also demonstrate the stage structure of synthetic GICs affected the film conductivity. The composite films made from exfoliated products of ground (around stage IV) GICs exhibited high electrical conductivity with a small amount of the graphite sheets.     

Light-Wavelength-Based Quantitative Control of Dihydrofolate Reductase Activity by Using a Photochromic Isostere of an Inhibitor

Photopharmacology has attracted research attention as a new tool for achieving optical control of biomolecules, following the methods of caged compounds and optogenetics. We have developed an efficient photopharmacological inhibitor—azoMTX—for Escherichia coli dihydrofolate reductase (eDHFR) by replacing some atoms of the original ligand, methotrexate, to achieve photoisomerization properties. This fine molecular design enabled quick structural conversion between the active “bent” Z isomer of azoMTX and the inactive “extended” E isomer, and this property afforded quantitative control over the enzyme activity, depending on the wavelength of irradiating light applied. Real-time photoreversible control over enzyme activity was also achieved.     

Organosulfonic acid-functionalized mesoporous composites based on natural rubber and hexagonal mesoporous silica

This study is the first report on synthesis, characterization and catalytic application of propylsulfonic acid-functionalized mesoporous composites based on natural rubber (NR) and hexagonal mesoporous silica (HMS). In comparison with propylsulfonic acid-functionalized HMS (HMS-SO₃H), a series of NR/HMS-SO₃H composites were prepared via an in situ sol–gel process using tetrahydrofuran as the synthesis media. Tetraethylorthosilicate as the silica source, was simultaneously condensed with 3-mercaptopropyltrimethoxysilane in a solution of NR followed by oxidation with hydrogen peroxide to achieve the mesoporous composites containing propylsulfonic acid groups. Fourier-transform infrared spectroscopy and ²⁹Si MAS nuclear magnetic resonance spectroscopy results verified that the silica surfaces of the NR/HMS-SO₃H composites were functionalized with propylsulfonic acid groups and covered with NR molecules. After the incorporation of NR and organo-functional group into HMS, the hexagonal mesostructure remained intact concomitantly with an increased framework wall thickness and unit cell size, as evidenced by the X-ray powder diffraction analysis. Scanning electron microscopy analysis indicated a high interparticle porosity of NR/HMS-SO₃H composites. The textural properties of NR/HMS-SO₃H were affected by the amount of MPTMS loading to a smaller extent than that of HMS-SO₃H. NR/HMS-SO₃H exhibited higher hydrophobicity than HMS-SO₃H, as revealed by H₂O adsorption–desorption measurements. Moreover, the NR/HMS-SO₃H catalysts possessed a superior specific activity to HMS-SO₃H in the esterification of lauric acid with ethanol, resulting in a higher conversion level.     

湖滨房屋 日本山梨

<正>这间房屋是一间单层别墅,坐落于山梨县富士山山脚的海滨地区。该地区面朝美丽的湖泊,是个非常迷人的地方。湖泊在微风和阳光的抚摸下泛起丝丝涟漪。湖泊两旁种植了高大的榉树和日本枫树。在设计房屋时,我们的主旨就是欣赏周围美丽的自然环境。整间房屋30米×6.3米,沿湖而建,因此在每个房间都可以欣赏湖泊的全景。房屋室内采用以白色为主题色的简约设计。没有任何装饰性元素的中性空间面朝美丽的大自然。室内采光十分充足,室     

Simultaneous bipedal locomotion based on haptics for teleoperation

ABSTRACT

This paper proposes a novel, simultaneous bipedal locomotion method using haptics for remote operation of biped robots. In general, traditional biped walking methods require very high computational power and advanced controllers to perform the required task. However, in this proposed method, a master exoskeleton attached to the human’s lower body is used to obtain the trajectory and haptic information to generate the trajectory of the slave biped robot in real time. Lateral motion of the center of mass of the biped is constrained in this experiment. Also, it is considered that no communication delay is presented in between the two systems in this experiment, and they are not discussed in this paper. Since a direct motion transmission is used in the proposed method, this method is quite straight forward and a simultaneous walking can be realized at the same time with high performance. Also, it does not require an exact dynamic model of the biped or specific method to plan the trajectory. The gait pattern of the biped is directly determined by that of the human. Also, the operator can feel the remote environment through the exoskeleton robot. Results obtained from the experiments validate the proposed method.     

Mammalian Cytochrome P450-Dependent Metabolism of Polychlorinated Dibenzo-p-dioxins and Coplanar Polychlorinated Biphenyls

Polychlorinated dibenzo-p-dioxins (PCDDs) and coplanar polychlorinated biphenyls (PCBs) contribute to dioxin toxicity in humans and wildlife after bioaccumulation through the food chain from the environment. The authors examined human and rat cytochrome P450 (CYP)-dependent metabolism of PCDDs and PCBs. A number of human CYP isoforms belonging to the CYP1 and CYP2 families showed remarkable activities toward low-chlorinated PCDDs. In particular, human CYP1A1, CYP1A2, and CYP1B1 showed high activities toward monoCDDs, diCDDs, and triCDDs but no detectable activity toward 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-tetraCDD). Large amino acids located at putative substrate-recognition sites and the F-G loop in rat CYP1A1 contributed to the successful metabolism of 2,3,7,8-tetraCDD. Rat, but not human, CYP1A1 metabolized 3,3'',4,4'',5-pentachlorobiphenyl (CB126) to two hydroxylated metabolites. These metabolites are probably less toxic than is CB126, due to their higher solubility. Homology models of human and rat CYP1A1s and CB126 docking studies indicated that two amino acid differences in the CB126-binding cavity were important for CB126 metabolism. In this review, the importance of CYPs in the metabolism of dioxins and PCBs in mammals and the species-based differences between humans and rats are described. In addition, the authors reveal the molecular mechanism behind the binding modes of dioxins and PCBs in the heme pocket of CYPs.     

Effect of the atmosphere on chemical composition and electrochemical properties of solid electrolyte interface on electrodeposited Li metal

Many efforts have been paid to realize the superior anodes for future Li batteries in either the dry Ar atmosphere or the dry air atmosphere. In this work, in order to clarify the effects of such atmospheres, the most reactive anodes of Li were freshly electrodeposited under the dry Ar or under the dry air condition. The Solid Electrolyte Interface (SEI) formed during the electrodeposition of Li anodes is revealed to have a different chemical composition and protective feature. The Li deposited under the dry air was revealed to have longer cycle life in the electrolyte than that deposited in Ar, even in the electrolyte containing ionic liquid. From the XPS results, the SEI formed in dry air is proved to be different from that formed in Ar gas atmospheres, that is, the SEI formed in dry air consists of Li₂CO₃ and Li nitride. In order to improve the performance of the anodes, the atmosphere for the initial preparation of the anode/electrolyte interface should be tuned.     

Selective preparation of oligomeric naphthylene ether and its applications to epoxy resin for silicon carbide power semiconductor device materials

In this study, a novel method for selective synthesis of naphthylene ether trimers by self‐condensation of 2,7‐dihydroxynaphthalene in the presence of catalytic amount of potassium hydroxide was reported. An epoxy resin from the trimers was prepared and properties of the cured epoxy resin were examined. The cured resin showed not only good physical thermal stability, such as high glass transition temperature and low thermal expansion coefficient, but also good chemical thermal stability like high thermal decomposition temperature. Additionally, low moisture absorption of the cured resin was confirmed. From these results, the newly prepared epoxy resin with naphthylene ether skeletons was considered to be suitable for advanced applications such as silicon carbide power semiconductor device. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43339.