In-situ microfracture observation of strip-cast Zr-Ti-Cu-Ni-Be bulk metallic glass alloys

In this study, Zr-Ti-Cu-Ni-Be bulk metallic glass (BMG) alloys containing a small amount of crystalline phase particles were fabricated by strip casting, and their improvement of mechanical properties and fracture toughness was explained by direct observation of the microfracture process. The compressive and fracture toughness test results indicated that strength, strain to failure, and fracture toughness of the strip-cast BMG alloy containing coarse crystalline particles were higher than those of the as-cast monolithic BMG alloy or the strip-cast BMG alloy containing fine crystalline particles. From in-situ microfracture observations, the improvement of overall mechanical properties of the strip-cast BMG alloy containing coarse crystalline particles could be interpreted by taking consideration of both the existence of coarse crystalline particles and the role of the particles to block crack propagation and to form multiple shear bands. Such property improvement suggests new applicability of the strip-cast BMG alloys containing coarse crystalline particles, which can work as toughening and strengthening reinforcements, to structures and components requiring excellent mechanical properties.     

Constitutive modelling and numerical simulation of multivariant phase transformation in superelastic shape‐memory alloys

This work concerns the micromechanical constitutive modelling, algorithmic implementation and numerical simulation of polycrystalline superelastic alloys under multiaxial loading. The model is formulated in finite deformations and incorporates the effect of texture. The numerical implementation is based on the constrained minimization of the Helmholtz free energy with dissipation. Simulations are conducted for thin tubes of Nitinol under tension–torsion, as well as for a simplified model of a biomedical stent. Copyright © 2004 John Wiley & Sons, Ltd.     

Highly ordered microstructures of poly(styrene-b-isoprene) block copolymers induced by solution meniscus

Microstructures of hundreds of micron thick poly(styrene-block-isoprene) copolymer films solution-cast in a cylindrical tube with the solvent evaporation controlled were investigated by transmission electron microscope (TEM), small angle X-ray scattering (SAXS) and optical microscope (OM). In a block copolymer with cylindrical polyisoprene microdomains, the orientation of the cylinders was varied along radial direction of the cylindrical tube. Highly aligned hexagonal arrays of in-plane polyisoprene cylinders were formed with their cylindrical axis parallel to the circumference of the tube in the regimes close to the wall edge. In contrast randomly ordered microdomains were observed at the center of the tube. We have also found that the orientation depends on the solvent evaporation rate and an intermediate rate (∼2.3 nL/s) provides the best orientation. In the case of a block copolymer with a bicontinuous double gyroid structure, we obtained a globally ordered microstructure where [111] crystallographic direction was parallel to the circumference of the tube. For both block copolymers, the area of highly ordered arrays of nanoscopic domains is over 1 mm². Development of the orientation was explained by coupling two orthogonal fields: (1) The flow of a solution induced by strong capillary force at a meniscus between the cylindrical tube wall and the block copolymer solution and (2) the solvent evaporation.     

Defining Yield from Bender Element Measurements in Triaxial Stress Probe Experiments

This paper describes the elastic response of a block sample of compressible Chicago glacial clay under a variety of stresses and its relationship with the deformation characteristics at relatively large strains. The elastic shear stiffness was obtained from bender element tests during consolidation and shearing in drained triaxial stress probe tests. An empirical correlation was established based on the elastic shear stiffness in a preyield condition. By comparing the empirical correlation with the measured elastic shear stiffness in the stress region during probing, the changes of elastic shear stiffness were investigated. The departure of elastic shear stiffness from values computed by the empirical relation based on K0 loading directly relates to the yielding characteristics of the clay. The large-scale change of soil structure at yielding alters the well-established relationship between the elastic shear stiffness and stresses in the preyield condition. The mechanical yielding response of clays can be detected based on the systematic analysis of the elastic shear wave velocities.     

A 0.25-/spl mu/m CMOS quad-band GSM RF transceiver using an efficient LO frequency plan

This paper describes a single-chip CMOS quad-band (850/900/1800/1900 MHz) RF transceiver for GSM/GPRS applications. It is the most important design issue to maximize resource sharing and reuse in designing the multiband transceivers. In particular, reducing the number of voltage-controlled oscillators (VCOs) required for local oscillator (LO) frequency generation is very important because the VCO and phase-locked loop (PLL) circuits occupy a relatively large area. We propose a quad-band GSM transceiver architecture that employs a direct conversion receiver and an offset PLL transmitter, which requires only one VCO/PLL to generate LO signals by using an efficient LO frequency plan. In the receive path, four separate LNAs are used for each band, and two down-conversion mixers are used, one for the low bands (850/900 MHz) and the other for the high bands (1800/1900 MHz). A receiver baseband circuit is shared for all four bands because all of their channel spaces are the same. In the transmit path, most of the building blocks of the offset PLL, including a TX VCO and IF filters, are integrated. The quad-band GSM transceiver that was implemented in 0.25-/spl mu/m CMOS technology has a size of 3.3/spl times/3.2 mm/sup 2/, including its pad area. From the experimental results, we found that the receiver provides a maximum noise figure of 2.9 dB and a minimum IIP3 of -13.2dBm for the EGSM 900 band. The transmitter shows an rms phase error of 1.4/spl deg/ and meets the GSM spectral mask specification. The prototype chip consumes 56 and 58 mA at 2.8 V in the RX and TX modes, respectively.     

High affinity presentation of an autoantigenic peptide in type I diabetes by an HLA class II protein encoded in a haplotype protecting from disease

Tissue composition and the distribution of body mass are described for four genera of East African Bovidae (Madoqua, Gazella, Damaliscus, Hippotragus) with supporting data from four others (Neotragus, Oryx, Tragelaphus, Connochaetes). These species are high in muscle mass, an adaptation convergent with other high-speed terrestrial cursors, bounders, and saltators. The segments below the elbow/cubitus and knee/stifle/genu joints in small bovids are both lighter in percent of total body mass (8.6% TBM) and less heavily muscled (10-15% of total limb musculature) than those segments in macaques (13.6% TBM, 20-25% of the limb musculature). Bovid species differ from one another in the regional distribution of muscle mass. Madoqua kirkii (4-5 kg) concentrates muscle in the lumbar extensors and hindlimbs; large species such as Damaliscus doreas (50-60 kg) and Hippotragus niger (160-220 kg) distribute it more evenly between the lumbar and cervical regions and between the hindlimbs and forelimbs. Gazella dorcas (10-20 kg) is quantitatively intermediate in those characteristics. The redistribution of muscle mass with increasing size correlates with the loss of axial bending of the vertebral column: in small, hindlimb dominant, 'dorsomobile' species such as Madoqua sagittal mobility increases stride length through 'extended' suspension; in large 'dorsostable' species such as Damaliscus and Hippotragus the vertebral column resists bending, consequently abbreviating or omitting this non-contact phase of the gait cycle. Locomotor adaptation as it is reflected in size, shape, and musculoskeletal structure is the key to habitat choice, dietary specialization, social structure, and male agonistic behavior and, therefore, central to the fabric of behavioral ecology.     

Homonucleotide tracts, short repeats and CpG/CpNpG motifs are frequent sites for heterogeneous mutations in the neurofibromatosis type 1 (NF1) tumour-suppressor gene

Glutamatergic synaptic potentials induced by micromolar concentrations of the potassium conductance blocker 4-aminopyridine (4-AP) were recorded intracellularly from rat neostriatal neurons in the presence of 10 microM bicuculline (BIC). These synaptic potentials originate from neostriatal cortical and thalamic afferents and were completely blocked by 10 microM 6-cyano-7-nitroquinoxaline-2,3-dione (CNQX) plus 100 microM D-2-amino-5-phosphonovaleric acid (2-APV). Their inter-event time intervals could be fitted to exponential distributions, suggesting that they are induced randomly. Their amplitude distributions had most counts around 1 mV and fewer counts with values up to 5 mV. Since input resistance of the recorded neurons is about 40 M omega, the amplitudes agree to quantal size measurements in mammalian central neurons. The action of a D2 agonist, quinpirole, was studied on the frequency of these events. Mean amplitude of synaptic potentials was preserved in the presence of 2-10 microM quinpirole, but the frequency of 4-AP-induced glutamatergic synaptic potentials was reduced in 35% of cases. The effect was blocked by the D2 antagonist sulpiride (10 microM). Input resistance, membrane potential, or firing threshold did not change during quinpirole effect, suggesting a presynaptic site of action for quinpirole in some but not all glutamatergic afferents that make contact on a single cell. The present experiments show that dopaminergic presynaptic modulation of glutamatergic transmission in the neostriatum does not affect all stimulated afferents, suggesting that it is selective towards some of them. This may control the quality and quantity of afferent flow upon neostriatal neurons.     

Lossless subband coding system based on rounding transform

We propose a new rounding transform called the overlapping rounding transform (ORT). It is defined as a two-port input/two-port output FIR filtering system with a pair of rounding operations. The ORT is applied to develop lossless subband coding systems. The ORT approach has both a simpler representation and more possibilities for lossless subband implementation than the lifting scheme