Whole-body kinetics and dosimetry of L-3--123I-iodo-alpha-methyltyrosine

BACKGROUND: Desflurane anesthesia can produce cerebral metabolic depression and increase cerebral blood flow. We evaluated the effect of desflurane on brain tissue oxygen pressure (PO2), carbon dioxide pressure (PCO2) and pH during neurosurgery. METHODS: Following a craniotomy, the dura was opened and a Paratrend 7 sensor, which measures PO2, PCO2, pH and temperature, was inserted into brain tissue. In 6 control patients in group 1, anesthesia was maintained constant with 3% end-tidal desflurane over 60 min, including a 30-min stabilization period. In group 2, 9 patients were ventilated with 3% desflurane under baseline conditions. After a 30-min stabilization period, baseline tissue gases and pH were measured and end-tidal desflurane was increased to 6% and then 9% for 15-min intervals. Mean arterial pressure (MAP) was maintained with intravenous phenylephrine. RESULTS: Under baseline conditions, cardiovascular and brain tissue measures were similar between the 2 groups. Increasing end-tidal desflurane from 3% to 9% produced burst-suppression EEG in all patients and significantly increased tissue PO2 and pH and decreased PCO2. No parameters changed significantly in the control group during steady-state anesthesia. CONCLUSION: These results show that 9% desflurane can improve brain tissue metabolic status before temporary brain artery occlusion if cerebral perfusion pressure is maintained. This may be particularly important in patients with symptoms of ischemia before surgery.     

Scattering of plane SH-waves by a cylindrical canyon of arbitrary shape in anisotropic media

The scattering and diffraction of plane SH-waves, by an arbitrary-shaped cylindrical canyon in anisotropic media is formulated here. Analytical solutions are obtained via the complex function theory, using the orthogonal property of the Hermite functions to solve the resulting set of infinite algebraic equations. Expressions for scattered displacements and scattered stresses are given. Three cross-sectional profile types are used in the numerical simulation of the two-dimensional canyon topography: (a) a semi-circular profile, (b) a semi-elliptical profile and (c) a triangular profile. The results obtained in (a) and (b) are consistent with known solutions computed by Trifunac and his co-workers [1,3] using a different method. As the exact solution for (c) is not known to exist, the result given here is believed to be new and would therefore serve as a useful check for numerical analysts working in this area.     

Indexed in current contents

Indexed in current contents     

Process conditions for separating fatty acid esters by supercritical CO2

The solubilities of ethyl palmitate, ethyl oleate, ethyl eicosapentaenoate (EPA) and ethyl docosahexaenoate (DHA) in supercritical carbon dioxide were determined by a continuous flow method. The solubilities of fatty acid ethyl esters increased with pressure and decreased as the temperature was increased. An empirical equation, similar to Chrastil's equation, was used to describe the relationship between solute solubility and the density of carbon dioxide. The empirical equation was further used to qualitatively estimate the separation efficiency of isolating EPA and DHA ethyl esters from fatty acid esters. The operating conditions yielding high solubility gave fast extraction rate but resulted in low separation efficiency. Experiments were conducted to separate ethyl EPA and ethyl DHA from a model mixture containing four fatty acid ethyl esters and from esterified squid visceral oil. The experimental data compared closely with the calculated values.     

Improved shape evolution of copper interconnects prepared by jet-stream etching

In the preparation of copper interconnects in the conductor pattern of a printed circuit board (PCB), wet etching processes are commonly adopted for creating patterns of high-density interconnects. Currently available techniques of immersion and spray etching could lead to poorly shaped wires due to complex flow fields or the disturbing puddling effect. A modified technique of arrayed jet-stream etching was developed in this work, aiming at producing well-defined copper interconnects on a PCB in a significantly shorter time. The results were appealing in that copper interconnects of 35/140 μm (thickness/width) exhibiting etching factors of greater than 6 were obtained in 20 s, much better than the conventional ones with etching factors of 3 to 5 and etching times of at least 2 min. In addition, uniformly etched copper interconnects with less than 20 μm undercuts were observed on one etching line. One additional point to note is that no banking agents or inhibitors as commonly seen in conventional etching techniques were needed in this new processing method.     

Organic‐acid‐catalyzed sol–gel route for preparing poly(methyl methacrylate)–silica hybrid materials

In this study, a series of organic–inorganic hybrid sol–gel materials consisting of a poly(methyl methacrylate) (PMMA) matrix and dispersed silica (SiO₂) particles were successfully prepared through an organic‐acid‐catalyzed sol–gel route with N‐methyl‐2‐pyrrolidone as the mixing solvent. The as‐synthesized PMMA–SiO₂ nanocomposites were subsequently characterized with Fourier transform infrared spectroscopy and transmission electron microscopy. The solid phase of organic camphor sulfonic acid was employed to catalyze the hydrolysis and condensation (i.e., sol–gel reactions) of tetraethyl orthosilicate in the PMMA matrix. The formation of the hybrid membranes was beneficial for the physical properties at low SiO₂ loadings, especially for enhanced mechanical strength and gas barrier properties, in comparison with the neat PMMA. The effects of material composition on the thermal stability, thermal conductivity, mechanical strength, molecular permeability, optical clarity, and surface morphology of the as‐prepared hybrid PMMA–SiO₂ nanocomposites in the form of membranes were investigated with thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, gas permeability analysis, ultraviolet–visible transmission spectroscopy, and atomic force microscopy, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Time-dependent differential changes of immune function in rats exposed to chronic intermittent noise

Noise is a highly relevant environmental and clinical stressor. Compared to most other experimental stressors, noise is a modest activator of neuroendocrine pathways that mimic the situation in human health where neuroendocrine activation by environmental stressors is often absent or difficult to establish. Little is known about the effects of noise exposure on the immune system. In the present work, the effects of a low-intensity chronic intermittent unpredictable noise regimen on various parameters of immune function was studied. Male wistar rats were exposed to a randomized noise protocol (white noise, 85 dB, 2-20 kHz) for 10 h per day, 15 min per h over a total period of 3 weeks. Control animals were exposed to ambient sound only. Immune function was monitored after 24 h, 7 days, and 21 days of noise exposure. Noise induced several significant changes in immune function in a time-dependent differential pattern involving both immunosuppression and immunoenhancement. After 24 h, serum IgM levels were increased and peripheral phagocytic activity was decreased. Splenic lymphocytic proliferation to mitogens was significantly decreased after 7 days, but slightly elevated after 3 weeks. The activity of splenic NK cells was increased significantly after 24 h and 7 days, but suppressed after 3 weeks. These results show that various parameters of immune function are affected differentially over time in a period of chronic mild noise stress, possibly due to sequential activation of different physiological mechanisms.