A 99-mm2 0.7-W single-chip MPEG-2 422P@ML video, audio,and system encoder with a 64-Mb embedded DRAM for portable 422P@HLencoder system

A scalable single-chip 422P@ML MPEG-2 video, audio, and system encoder LSI for portable 422P@HL system is described. The encoder LSI is implemented using 0.13-μm embedded DRAM technology. It integrates 3-M logic gates and 64-Mb DRAM in an area of 99-mm². The power consumption is suppressed to 0.7 W by adopting a low-power DRAM core. It performs real-time 422P@ML video encoding, audio encoding, and system encoding with no external DRAM. Furthermore, the encoder LSI realizes a 422P@HL video encoder with multichip configuration, due to its scalable architecture. This results in a PC-card size 422P@HL encoder for portable HDTV codec system     

Eradication of Helicobacter pylori in patients with end-stage renal disease undergoing dialysis treatment

The aim of the present study was to examine the efficacy and safety of combination therapy with amoxicillin (AMPC), lansoprazole, and plaunotol for the eradication of H. pylori in dialysis patients. The subjects consisted of 15 dialysis patients (10 men and 5 women, mean age of 56 +/- 2.4 years) in whom H. pylori was found in the stomach. H. pylori status was evaluated by histology, culture and rapid urease test with biopsy specimens of the gastric mucosa. The patients were treated with AMPC 500 mg once a day for 3 weeks, lansoprazole 30 mg once a day for 8 weeks and plaunotol 80 mg three times a day for 24 weeks. In addition, the concentrations of serum gastrin and gastric juice ammonia were measured. Fourteen patients completed the treatment schedule, while one discontinued treatment because of nausea and diarrhea. Among the 14 patients, H. pylori was eradicated in 11 without any side effects (eradication rate 78.6%). Concentrations of gastric juice ammonia and serum gastrin were reduced significantly in patients who became H. pylori-negative. The present study indicates that combination therapy with AMPC, lansoprazole and plaunotol is safe and efficient for the eradication of H. pylori in dialysis patients. The results also suggested that elevated concentrations of gastric juice ammonia and serum gastrin in dialysis patients can be attributed, at least in part, to H. pylori infection.     

Central and peripheral mechanisms involved in hypertension induced by chronic inhibition of nitric oxide synthase in rats

OBJECTIVE: To study the possible central and peripheral mechanisms involved in hypertension induced by chronic inhibition of nitric oxide synthase. METHODS: We evaluated neurohormonal and renal responses of Wistar rats to chronic oral administration of 20 and 100 mg/kg per day NG-nitro-L-arginine methyl ester (L-NAME). Effects of intracerebroventricular and intravenous injections of NO donors (NOC-18 and FK-409) and an angiotensin II type 1 receptor antagonist CV-11974, and intravenous injection of alpha-adrenergic receptor antagonist phentolamine after chronic treatment with 100 mg/kg per day L-NAME were also studied. RESULTS: The chronic treatment with L-NAME induced a sustained dose-dependent hypertension with a decrease in heart rate. Urinary levels of norepinephrine and epinephrine decreased with no changes in plasma catecholamine levels, renin activity, and vasopressin level. Serum nitrate/nitrite levels in the rats treated with the high dose of L-NAME decreased. The intracerebroventricular and intravenous injections of the NO donors reduced arterial pressure in L-NAME-treated rats to a significantly greater extent than they did that in control rats. The intravenous but not intracerebroventricular injection of CV-11974 produced a sustained decrease in arterial pressure of L-NAME-treated rats. The depressor responses to intravenous injection of phentolamine of L-NAME-treated and control rats were similar. CONCLUSIONS: Results indicate that L-NAME-induced hypertension is associated with a deficiency of nitric oxide, both peripherally and centrally. Circulating angiotensin II could contribute to the maintenance of hypertension via angiotensin II type 1 receptor while the sympathetic nervous system seems to be suppressed.     

Effect of etchant, etching period, and silane priming on bond strength to porcelain of composite resin

The purpose of this study was to evaluate the effect of etching and silane priming on bond strength to a feldspathic porcelain (VMK 68) of a composite resin (Clearfil APX). Two hydrofluoric acid etchants (2.5% and 5%) and seven different etching times (0, 30, 60, 90, 120, 150, and 180 seconds) were used to etch the porcelain specimens respectively. A self-curing bonding agent containing a silane coupler (Clearfil Porcelain Bond) was used on both etched and unetched porcelain surfaces. Etched relief patterns were observed by means of a scanning electron microscope, and the bond strengths between the photocured composite resin and the porcelain were determined. Scanning electron micrographs revealed complicated etching patterns with increased etching time periods. Shear testing results showed that the bond strength to the unetched porcelain of the composite resin was very low, and that etching periods for more than 30 seconds effectively enhanced the bond strength. Of the two etching agents applied to the unsilanated porcelain, the buffered 2.5% etchant produced higher bond strengths than the 5% etchant for all etching time periods except for 180 seconds. Silane priming was effective and critical for improving bond strength to the porcelain. Application of the silane bonding agent to the porcelain after hydrofluoric acid etching appeared to be suitable for achieving consistent bonding between the composite resin and the porcelain.     

Long-term results of mitral valvuloplasty for mitral regurgitation

From July 1979 to February 1995, 126 patients, including 4 reoperations, aged between 6 months and 77 years underwent mitral valve repair for mitral regurgitation. The patients were divided in two groups, 46 patients aged less than 16 years in pediatric age group and the other 80 patients in a dult group. The methods consisted of asymmetric annuloplasty (Kay-Reed method) in 98 patient, Carpentier-Edwards ring annuloplasty in 14, quadrangular resection of the posterior leaflet with annuloplasty in 9, and chordal and leaflet repair in 5. There was no hospital nor late death in pediatric age group. Three hospital deaths and one late death were in adult group. Follow-up was 96% complete and totaled 812.1 patient years. Reoperations underwent in 3 pediatric patients and 9 adults. At 15 years' follow-up, freedom from reoperation was 91.5 +/- 4.7% in pediatric age group and 67.1 +/- 12.7% in adults. Freedom from event was 63.5 +/- 12.1% in adult group. These results suggest that mitral repair with Kay-Reed method in pediatric age group is favorable for long-term. In contrast, indications for mitral reconstraction with other methods including ring annuloplasty should be extended for aged patients with severely dilated annuls and degenerated leaflets.     

Fatigue crack growth behavior of Sn-Pb and Sn-based lead-free solders

Solder alloys of lead-rich composition have been commonly used as joining materials in electronic package. However, because of environmental concerns, lead-free solders will replace lead-rich solders more and more in the future. The fatigue characteristics of the solders used are most important in assessing the reliability of joints in electronic packaging. In the present study, the fatigue crack growth (FCG) behavior of a wide variety of solders of both lead-rich and lead-free types has been investigated under a range of mean stresses and frequencies. Both time dependent and time independent (cyclic dependent) behaviors were observed. In the cyclic dependent crack growth regime, the FCG rates could be expressed as a function of either ΔK_eff or ΔJ. Further, the lead-free solders were found to have a higher resistance to FCG than did the lead-rich solders. In the time dependent crack growth regime, the FCG rates were found to be a function of C∗. The point of transition between time dependent and time independent behavior was found to depend on the homologous temperature and strength of the alloys.     

Cryo-transfer TEM study of vacancy cluster formation in thin films of aluminum and copper elongated at low temperature

Kiritani et al. encountered a large number of vacancy clusters in heavily deformed thin metal films at room temperature. In the present work, thin films of aluminum and copper were loaded to fracture in liquid nitrogen and transferred directly to the TEM without warming up (Cryo-transfer TEM). In thin films of Al and Cu deformed at 78 K, many defect clusters were observed at 120 K. In thin Al films, small defect clusters disappeared by the 120 keV electron irradiation. Upon isochronal annealing, some of the dislocation loops grew in their size, which is much larger than those observed at 120 K. However, in regions that were not exposed to electron irradiation at 120 K, only a large number of stacking fault tetrahedra were observed after room temperature annealing. In copper, the 200 keV electron beam did not significantly change the defect clusters observed at 120 K.     

Formation of a low reflective surface on crystalline silicon solar cells by chemical treatment using Ag electrodes as the catalyst

A new method was developed for making a porous silicon layer as an anti-reflective coating on the top of crystalline silicon solar cells. The porous silicon layer was formed in a mixed solution of H₂O₂ and HF by using screen-printed Ag front electrodes as the catalyst. With the help of the catalytic effect, porous silicon layers were formed by treatment in a solution chemically milder than conventional solutions. The multi-crystalline silicon solar cell covered with the porous silicon layer showed a surface reflectance below 15% in a wavelength region of 400–800 nm.     

A new shear technique: Semi Continuous Shear Flow (SCSF) in medium and ultra high molecular weight Polyhydroxybutyrate blends

In MMWT/UHMWT PHB blends (99.5/0.5), (99/1), (98/2) and (97/3) we demonstrate that by applying our new shear technique, “semi continuous shear flow”, copious fibre formation is guaranteed, irrespective of the ultra high molecular weight composition. The shishes formed via this technique are extremely stable being able to maintain their stability for at least 5–10 min. When this technique was applied to MMWT/UHMWT PHB blends of compositions (95/5), (90/10) and (85/15) disorientated fibres were observed in the flow direction. On increasing the UHMWT component, distinct unordered and intertwining of fibres resulted and with severe shearing orientation occurred, however shish formation was limited. We propose the optimum conditions for shish formation and the critical molecular weight necessary for entanglement.