Thickness estimation of interface films formed on Li1−xCoO2 electrodes by hard X-ray photoelectron spectroscopy

Solid electrolyte interface (SEI) films formed on Li_1−xCoO₂ electrodes were observed with hard X-ray photoelectron spectroscopy (HX-PES). This paper particularly focuses on film thickness estimation using HX-PES with theoretical calculation. The validity of the calculation was proven by experiments using model SEI films. The native film formed on a LiCoO₂ composite electrode was estimated to be LiF with its thickness of 5 nm. Formation of Co (II) species on top of LiCoO₂ was also indicated. Storage of the electrode at 60 °C brought about considerable film growth (30-40 nm) with carbonate compounds formation. SEI film changes during charging of the LiCoO₂ electrode were also examined. The main component in the film was deduced to be LiF or a kind of fluorite, with its thickness decreased during charging. The SEI formation mechanisms are also elucidated.     

Separation of Ru(III), Rh(III) and Pd(II) from nitric acid solutions using ion-exchange resins bearing carboxylic betaine

To understand the adsorption properties of a styrene–divinylbenzene copolymer functionalized with N,N,N-trimethylglycine, AMP03, the adsorption behaviours for platinoid ions (Ru(III), Rh(III) and Pd(II)) were examined. Furthermore, we performed adsorption experiments using sample solutions by adding triethylamine, thiourea and N,N,N-trimethylglycine. Based on the adsorption data obtained in this study, we performed chromatographic experiments. The results indicated that all platinoid ions in the feed solution completely adsorbed on AMP03, and almost 80% of the adsorbed platinoid ions were recovered. These results show that AMP03 has the potential to recover Ru(III), Rh(III) and Pd(II) from high-level liquid waste.     

Inhibition of char deposition using a particle bed in heating section of supercritical water gasification

Supercritical water gasification (SCWG) has attracted attention as a technology for utilizing wet biomass. We used a fluidized bed of alumina particles to prevent blockage of a SCWG reactor. A glucose solution was heated in the reactor with and without fluidized alumina particles. In the absence of alumina particles, char particles formed homogeneously in the reactor, but the use of a fluidized bed resulted in accumulation of char particles at the reactor’s exit rather than inside the reactor. Therefore, the fluidized bed was effective at preventing blockage of the reactor. However, the alumina particles did not remove deposits from the reactor’s walls. Instead, the fluidized bed caused larger char particles to form, preventing their adhesion to the reactor’s wall.     

Homogeneous Strain Introduction Using Reciprocation Technique in High-Pressure Sliding

Metallurgical and Materials Transactions A - This study examines strain distribution occurring in the high-pressure sliding (HPS) processing for rods of pure Al and an AZ61 alloy. The strain...     

Micro machining for control of wettability with surface topography

A micro fabrication is presented to manufacture hydrophobic surfaces with micro-scale structures. Hydrophobicity is controlled with the shape and the alignment of micro pillars in the structure. The structures are manufactured in large areas at high production rates in the following processes: (1) the structure is fabricated on a tool by focused ion beam sputtering; (2) the reverse structure is formed on a metal plate by incremental stamping using the structured tool; and (3) the structure is transferred onto plastic plates by molding. A consecutive stamping is also proposed to fabricate several structures on a surface accurately with a structured tool, in which the moving pitch of the structured tool is numerically controlled. The effect of the surface topography on hydrophobicity is discussed with measuring contact angles on the structured surfaces in the water droplet tests. Hydrophobicity on the plastic plate is associated with the solid fraction on the structured surface based on the Cassie–Baxter model. A larger contact angle is observed for a smaller solid fraction of the surface.     

Antihypertensive Effect of Salt-Free Soy Sauce,a New Fermented Seasoning,in Spontaneously Hypertensive Rats

ABSTRACT: In this study, we focused on the antihypertensive effect of newly fermented salt-free soy sauce (SFS) in spontaneously hypertensive rats (SHRs). A 13-wk oral administration of SFS was performed daily in 8- to 21-wk-old SHRs with a dose of 200 mg/kg of body weight/d. The systolic (SBP) and diastolic (DBP) blood pressures were measured for each week during the experimental period. As a result, a significant (P < 0.01) BP lowering effect was observed from the 5th d to the end of the experiment in the SFS group compared with the control group (ΔSBP_21-wk: 27 mmHg, ΔDBP_21-wk: 20 mmHg). In contrast to such substantial effect by SFS intake, angiotensin I-converting enzyme activities in blood and local organs as well as pharmaceutical parameters such as serum Na⁺ or K⁺ level did not show any significant difference between in both SFS and control groups. Vasoconstriction experiment using thoracic aorta rings from 21-wk SHRs provided an interesting result that the rings from the SFS group evoked a >2-fold higher increase in the angiotensin II-stimulated constrictive response compared with the rings from the control group (P = 0.012), which suggested that the SFS-intake would be effective in possessing a higher vessel tone. Practical Application: In this study, we investigated the antihypertensive effect of newly fermented SFS in SHRs. As a result of 13-wk SFS-administration, we found a significant antihypertensive effect of the SFS. This finding strongly demonstrates that the developed SFS would be greatly beneficial for health and useful for health-related industries.     

A novel ferromagnetic thermo-stent for plaque stabilization that self-regulates the temperature

The purpose of this study is to investigate the vascular wall with a thermally self-regulating, cylindrical stent made of a low Curie temperature ferromagnetic alloy. Physiologic saline was circulated in the silicone model vessel implanted with the stent. The stent-temperature remained nearly constant for variable saline flows, saline temperatures, and magnetic flux densities. Stent implants of this type in human blood vessels could potentially enable thermotherapy and temperature determination without catheterization.     

Discovering Emerging Topics from WWW

Discovering emerging topics from WWW has been attracting attention of business professionals, especially marketing researchers. For this purpose, WWW can be a valuable source of information because it reflects the dynamics of human society. In this paper we aim at revealing the structure of WWW by using KeyGraph, a visualization method of hidden structure behind data, for understanding emerging topics.