Microcellular foaming of PE/PP blends

Three different polyethylene/polypropylene (PE/PP) blends were microcellular foamed and their crystallinities and melt strengths were investigated. The relationship between crystallinity, melt strength, and cellular structure was studied. Experimental results showed that the three blends had similar variation patterns in respect of crystallinity, melt strength, and cellular structure, and these variation patterns were correlative for each blend. For all blends, the melt strength and PP melting point initially heightened and then lowered, the PP crystallinity first decreased, and then increased as the PE content increased. At PE content of 30%, the melt strength and PP melting point were highest and the PP crystallinity was least. The blend with lower PP crystallinity and higher melt strength had better cellular structure and broader microcellular foaming temperature range. So, three blends had best cellular structure at PE content of 30%. Furthermore, when compared with PE/homopolymer (hPP) blend, the PE/copolymer PP (cPP) blend had higher melt strength, better cellular structure, and wider microcellular foaming temperature range, so it was more suited to be microcellular foamed. Whereas LDPE/cPP blend had the broadest microcellular foaming temperature range because of its highest melt strength within three blends. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 4149–4159, 2007     

石莼基微/中孔复合结构活性炭的制备及性能

以海洋海藻废弃物石莼为原料,通过热解预炭化,KOH活化制备活性炭。以碘吸附值和亚甲基蓝吸附值为吸附性能评价指标,探究了活化工艺对活性炭吸附性能的影响。结果表明,当KOH与石莼半焦质量比(碱炭比)为3.0∶1.0、活化时间为45 min、活化温度为800℃时,活性炭吸附性能最优,其碘吸附值和亚甲基蓝吸附值最大,分别为1824.19 mg/g、914.98 mg/g。FTIR测试表明,活性炭含有大量羟基等官能团。SEM测试表明,活性炭表面粗糙、存在大量孔结构。活性炭的BET比表面积为2616.3 m2/g,Langmuir比表面积高达4883.5 m2/g,平均孔径为2.73 nm。石莼基活性炭的孔结构为微/中孔复合结构,有作为储能、环保材料的潜质。     

Improving Dewaterability and Other Properties of Citric Acid Wastewater Treatment Sludge by Ozone and Peroxone

ABSTRACT

The efficacies of ozonation and peroxone (O₃/H₂O₂) pretreatments were compared for citric acid wastewater sludge conditioning with the objective of improving dewatering characteristics of the sludge. Treatment with 84 mg O₃/g dry solid (DS) and 12.5 mg/g DS H₂O₂ greatly enhanced the effectiveness of ozonation, providing sludge dewaterability similar to that obtained by ozonation at 250 mg O₃/g DS. Most importantly, treatment of citric acid wastewater sludge with 84 mg O₃/g DS and 12.5 mg/g DS H₂O₂ led to the preservation of the nutrient elements nitrogen, phosphorus, and potassium in the sludge with a minimal volatile suspended solids/total suspended solids reduction of 5.5%, which is much lower than that with ozonation at 250 mg O₃/g DS.     

天然橡胶乳液压敏胶粘剂

本文介绍了天然橡胶胶乳压敏胶的基本情况，内容包括基本组成、主要优缺点和改进方法。     

采用两种中间介质的工业园区厂际余热集成

发挥园区集群效应，借助中间介质回路将工业园区中各单厂内的余热于厂际间进一步回收利用，能够显著提高园区整体能源效率。其中，中间介质回路的设置与介质的选择将关系到整个余热回收系统的最优设计与节能效果。因此，不同于目前研究仅采用一种中间介质的集成策略，同时选用热水和导热油为介质开展厂际余热集成研究。提出耦合介质与厂内流股换热及介质流股在厂际间分配的换热器网络超结构，以年度总费用最小为目标建立MINLP热集成数学模型，优化获得包含介质回路结构与厂内换热器网络结构等内容的园区余热集成结果。最后，在一个包含3个厂的厂际余热集成案例中，分别研究了单种介质单回路、单种介质双回路及双种介质双回路3种情况，通过对比验证了所提方法的有效性。     

选磷厂废水电化学处理循环利用

简要介绍磷矿浮选厂废水（尾矿水）进行电化学处理的研究和处理后循环使用的浮选工艺试验以及含固废水电化学处理的理论基础。试验结果表明：经电化学处理后的废水达到工艺用水水质控制指标；反复循环使用于浮选工艺取得满意效果；电化学处理方法是实现工业废水循环利用的有效手段。     

大块液膜技术处理含六价铬废水

以磷酸三丁酯(TBP)为载体,煤油为稀释剂,NaOH为反萃剂,采用大块液膜技术处理含95~100mg/LCr(VI)的模拟废水。考察了液膜相用量、载体体积分数及反萃剂浓度对大块液膜过程中Cr(VI)传质过程的影响。结果表明,大块液膜技术对废水中Cr(VI)的去除效果较好。Cr(VI)迁移速率随TBP体积分数的提高而加快。当反萃剂NaOH浓度大于0.5mol/L时,反萃剂浓度对Cr(VI)传质过程的影响较小。处理后废水中Cr(VI)含量降至0.5mg/L以下,达到国家排放标准。     

主分散剂加料顺序更迭的讨论

讨论了国内70 m3聚合釜等温水加料工艺传统的主分散剂加料顺序更迭的可行性,以及由此产生的对体系稳定性的影响程度和期望的PVC树脂在增塑剂吸收量等方面的有益变化。该技术在国内相关的生产领域将产生积极的作用,提高PVC树脂质量。     

Epitaxy growth and directed crystallization of high-density polyethylene in the oriented blends with isotactic polypropylene

Various lamellar orientations of high-density polyethylene (HDPE), due to competition between bulk nucleation and interfacial nucleation, have been realized in its melt drawn blends with isotactic polypropylene (iPP) upon cooling after subjected to 160 °C for 30 min. Directed crystallization, with heterogeneous nucleation in the bulk (within domains), is defined as lamellar growth along boundary of anisotropic domains and is favored in larger domains at higher temperature (slow cooling), since overgrowth of lamellae can feel the interface rather than impingement with neighbor ones as a result of scare nuclei at higher temperature. Moreover, lamellar growth caused by directed crystallization is dependent of dimension of confinement. Due to 2D confinement of cylindrical domains, lamellae can only grow along the axis of cylinder and thus b-axis orientation is formed. While in the layered domains with 1D confinement, however, lamellae grow with the normal of (110) plane along the melt drawn direction. On the other hand, epitaxial growth of HDPE chains onto iPP lamellae is related to the surface-induced crystallization and dominated by the interfacial nucleation. Only interfacial nucleation is preferred can epitaxial growth occur. Therefore, retarded crystallization, realized by either strong confinement in finer domains or rapid cooling or both, is favorable for it.     

TiCl4水解法制备纳米TiO2粉体

以TiCl4为原料,采用低温液相水解法制备了纳米TiO2粉体,着重研究了Ti4 的浓度和添加聚乙烯吡咯烷酮(Polyvinylpyrrolidone,PVP)对产物的晶相、颗粒大小和表面形貌的影响.使用XRD,TEM,SEM,激光粒度测试仪对样品进行了表征.结果表明,Ti4 浓度影响TiO2粉体的相转变温度,随着Ti4 浓度的升高金红石相的含量逐渐升高,但粉体分散性变差;添加PVP提高了所得TiO2粉体的分散性,粒径降低为40～50 nm左右,并改善了粉体的形貌.