Preparation of flexible polyhedral particles via concentrated emulsion templating polymerization

This paper presents recent efforts on the preparation of flexible polyhedral particles via concentrated emulsion templating polymerization in which the hydrophilic monomer (acrylamide) and hydrophobic monomer (butyl acrylate) are polymerized simultaneously in the continuous and dispersed phase, respectively. Such templating polymerization has been enhanced in our systems owing to the introduction of acrylamide monomer and their higher polymerization rate in continuous phase as compared with butyl acrylate in dispersed phase. Diffusion between the different phases was also inhibited. Furthermore, the stability of the concentrated emulsion and the molecular weight of the produced poly(butyl acrylate) were found to be significantly affected by the amount of redox initiator. The morphology of the particles could be controlled by varying the volume fraction of the dispersed phase and the polyhedral particles were achieved at higher volume fraction. Copyright © 2005 Society of Chemical Industry     

以创新实现云南文山斗南锰资源的有效利用

随着国民经济特别是钢铁工业的迅速发展，资源危机成为困扰资源型可持续发展的核心问题，只有坚持以创新为动力，才能实现锰矿等资源的有效利用。     

济钢中厚板厂3500mm精轧机快速换辊自控系统

中厚板厂3500mm精轧机快速换辊自控系统，集可编程序控制器、变频传动技术、液压控制于一体。实现了工作辊、支承辊准确、快速地更换。通过网络技术与其他控制系统进行数据交换、操作及连锁，使轧制生产线实现了全自动化轧制，不仅改善了工人的劳动强度，还提高了产品的产量及质量，取得了巨大的社会效益及经济效益。     

群发短消息对PHS网呼入成功率的影响分析

介绍了PHS网呼入成功率和短消息流程，依据短消息模型和性能统计结果分析了群发短信对PHS网呼入成功率的影响，并建议选择合理的时间进行短消息群发以减少对网络负荷的影响。     

QFT control design for an approximately linearized pneumatic positioning system

A block‐oriented approximate feedback linearization for control of a pneumatic cylinder positioning system is introduced and a rather detailed discussion is presented on the uncertain linearization residual characterization. It is shown that making use of the characterized gain–phase information of the linearized system leads to a more reasonable trade‐off between performance and stability in the QFT control design and thus results in high control performance. Simulation and experimental results are shown. Copyright © 2003 John Wiley & Sons, Ltd.     

Asset-Management of Transformers Based on Condition Monitoring and Standard Diagnosis [Feature Article]

In this paper, a methodology is developed to use data acquisition derived from condition monitoring and standard diagnosis for rehabilitation purposes of transformers. The interpretation and understanding of the test data are obtained from international test standards to determine the current condition of transformers. In an attempt to ascertain monitoring priorities, the effective test methods are selected for transformer diagnosis. In particular, the standardization of diagnostic and analytical techniques are being improved that will enable field personnel to more easily use the test results and will reduce the need for interpretation by experts. In addition, the advanced method has the potential to reduce the time greatly and increase the accuracy of diagnostics. The important aim of the standardization is to develop the multiple diagnostic models that combine results from the different tests and give an overall assessment of reliability and maintenance for transformers.     

房地产企业的项目进度控制

介绍了房地产企业项目进度控制的重要性，从事前、事中、事后三个阶段探讨了工程进度的控制，以保证房地产企业的项目顺利完工，从而保证建筑物的施工质量，提高房地产企业的竞争力。     

未增塑聚氯乙烯(PVC-U)异型材配方基础

PVC-U异型材配方十分复杂,常用原料通常在10种以上。根据大连实德集团实际生产情况,这10多种原料通常以7大组分的方式进行配料和生产。文中就该配方中7大组分的分类、特点及应用情况分别进行了详细介绍。     

正交设计法优选麻叶千里光碱溶态中硒提取工艺的研究

利用正交设计法优选麻叶千里光碱溶态中硒提取工艺。首先,选用不同溶剂提取麻叶千里光,用石墨炉原子吸收法测定各种形态中硒元素的含量,然后,用超声波—微波协同提取麻叶千里光碱溶态中硒,正交实验确定麻叶千里光碱溶态中硒的最佳提取条件.结果不同溶剂提取麻叶千里光时得:碱溶态(23.10μg/g)>盐溶态(17.20μg/g)>水溶态(14.60μg/g)>醇溶态(13.83μg/g)>醚溶态(10.60μg/g)>四氯化碳溶态(6.03μg/g);相对标准偏差在0.29%—1.96%间;加标回收率在98.24%—105.1%间.根据正交实验,通过极差分析:A>D>B>C;优方案为A_2D_3B_4C_2,即麻叶千里光中的硒在碱浓度为0.25 mol/L,料液比为1:20,提取功率为200 W,提取时间为180s时提取效果最好.     

用于实时数据传输的滑动帧方法及其实现

根据某雷达系统对测量信号的快速传输要求,提出采用滑动帧的处理方法并在FPGA中实现,克服了传统帧处理难以满足快速传输要求的不足。阐述了滑动帧结构的构造思想,详述了滑动帧结构的特点及具体功能模块的实现。根据实际应用需求构造了滑动帧结构处理器,试验和应用结果表明设计可行有效,能充分满足实时数据传输的要求。