Effect of thermoultrasonication on Salmonella enterica serovar Enteritidis in distilled water and intact shell eggs

The combined effects of simultaneous application of ultrasonic waves and heat treatment (thermoultrasonication) on the survival of a strain of Salmonella enterica Enteritidis was studied in both distilled water and intentionally contaminated intact eggs immersed in water. Although minor differences were observed between parameters obtained for thermoultrasonic treatment of bacteria suspended in water and those attached to the shell egg, the thermoultrasonication effects were considered to be of the same level in the range of temperatures assayed (52 to 58 degrees C). This combined process presented a clearly higher killing effect than the heat treatment alone. It decreased the decimal reduction times (D-values) by 80 to 55%, respectively, in the range of temperatures for heat treatment when the organism was suspended in water, which means a 99.5% reduction (5D to >2D) of the original bacterial load versus a 90% reduction for the heat treatment alone. The practical implications of the phenomenon are discussed.     

Cellular localization and changes in expression of prolactin receptor isoforms in sheep ovary throughout the estrous cycle

The actions of prolactin (PRL) on target cells depend on the type of prolactin receptor (PRLr) predominantly expressed, particularly whether the long PRLr isoform is expressed. The aims of this study were to determine the cellular localization and the changes in expression of long and short PRLr isoforms in sheep ovary throughout the estrous cycle. Long and short PRLrs were localized mostly in the same ovarian cells. Maximum signal intensity, particularly for long PRLrs, was found in stromal cells surrounding primordial and primary follicles, and, for both PRLrs, in granulosa cells of preantral follicles and in luteal cells. Moderate signal intensity for PRLrs was found in theca cells of preantral to ovulatory follicles, and in granulosa cells of antral follicles up to the gonadotropin-dependent stage. Decreasing immunoreactivity to PRLrs was found in granulosa cells of gonadotropin-dependent to ovulatory follicles. For long PRLrs in particular, no signal was found in mural granulosa cells of gonadotropin-dependent follicles; for both isoforms, no signal was found in most granulosa cells of ovulatory follicles. In primordial to gonadotropin-dependent follicles, cellular localization of PRLr was similar on days 0, 10 and 15 of the cycle. Oocytes consistently showed positive immunostaining for PRLrs. Comparative RT-PCR analysis of long and short PRLr expression showed that the short isoform is evenly expressed throughout the estrous cycle, whereas the expression of the long form increases at the time of estrus and decreases at mid-luteal phase and at the onset of the follicular phase. Expression of long PRLrs was greater than that of short PRLrs on day 0 of cycle; expression of both isoforms was similar on day 10 and on day 15, long PRLrs expression was lower than that of short PRLrs. Our results indicate that in sheep ovary, the maximum responsiveness to PRL might occur during the preovulatory phase of the estrous cycle.     

A new procedure for treatment of oily slurry using geotextile filters

A new procedure to mitigate the environmental impacts and reduce the cost of disposal of oil slurry is present in this paper. Waste from the petroleum industry has a high environmental impact. Systems for oil–water separation have been used to mitigate the contamination potential of these types of effluents. At the outlet of these systems, the oil is skimmed-off the surface, while the slurry is removed from the base. Due to the high concentration of contaminants, the disposal of this slurry is an environmentally hazardous practice. Usually this type of waste is disposed of in tanks or landfills after removal from the industrial plant. Basically, the proposed procedure utilizes drying beds with geotextile filters to both reduce the water content in the slurry and obtain a less contaminated effluent. Laboratory tests were carried out to simulate the drying system. Four types of filters were analyzed: two non-woven geotextiles, one woven geotextile, and a sand filter.     

Continuous mandibular distraction osteogenesis using superelastic shape memory alloy (SMA)

Distraction osteogenesis is a well-established method of endogenous tissue engineering. It is a biological process of bone neo-formation between segments subjected to tension. The concept of this study was to investigate the distraction osteogenesis with a device capable of creating a permanent and constant force during the whole process as if a very large number of small elongations were applied constantly. The mechanical testing of the device used to produce the constant force and the in vivo analysis of the bone growth after it was implanted in rabbits are presented on this work. The device consists of a NiTi coil spring, superelastic at body temperature, in order to have a stress plateau during the austenitic retransformation during the unloading. The in vivo analysis was made on six female rabbits of 12 months old. A segmental mandibulectomy at the horizontal arm of the mandible and a corticotomy at 5mm distant from the gap were made. Next, following a latency period of five days, the SMA springs were implanted to induce the bone neo-formation. The displacement at the unloading plateau shows that it is necessary to have longer springs or to use several (available commercially) in series in order to fulfil the requirements of a human distraction. The temperature variations induced changes in the spring force. However, when the temperature returns to 37 degrees C the distraction force recovers near the initial level and does so completely when the distraction process continues. For the in vivo study, all six rabbits successfully completed the distraction. The radiographies showed the gap as distraction advanced. A continuity in the newly formed bone with similar transversal and horizontal dimensions than the original bone can be observed on the histologies. In conclusion, the application of a constant force on distraction osteogenesis, using SMA springs, may be a successful alternative to the conventional gradual distraction.     

Towards cooperative frameworks for modeling and integrating biological processes knowledge

Data organization has become a strategic target for biologists due to the increasing volume of genomic data available for them. For this purpose, we need a complete knowledge model for representing biological system. In this paper, we deal with both processes for the creation and integration of shareable, reusable domain models within biology, which is a critical issue. In particular, this work introduces a new cooperative development approach for biology ontologies. This approach is based on the integration of the ontologies supplied by different human experts. Two experiments in biological domains are presented and their results discussed.     

Monitoring of bacterial contamination in food samples using capillary zone electrophoresis

A capillary electrophoresis method with UV detection is proposed for the identification and quantitation of bacterial contamination in food samples. The electrophoretic separation relies on the differential mobility of bacteria in the capillary. Electrophoretic resolution is improved by using calcium and myoinositol hexakisphosphate as specific ions that interact with the bacterial surface changing its electrical properties and electrophoretic mobility. The proposed method allows the effective separation of eight different types of bacteria in only 25 min. It was successfully used to detect the presence of bacteria in contaminated food. The precision of the analysis of real spiked samples ranges from 3.3 to 7.0%, and the overall analysis time is 7 h, which is much shorter than the 24-48 h typically required for plate counts. The validity of the method was established by comparison with the standard plate counting method.     

Second-order advantage achieved with four-way fluorescence excitation-emission-kinetic data processed by parallel factor analysis and trilinear least-squares. Determination of methotrexate and leucovorin in human urine

Four-way fluorescence data recorded by following the kinetic evolution of excitation-emission fluorescence matrices (EEMs) have been analyzed by parallel factor analysis and trilinear least-squares algorithms. These methodologies exploit the second-order advantage of the studied data, allowing analyte concentrations to be estimated even in the presence of an uncalibrated fluorescent background. They were applied to the simultaneous determination of the components of the anticancer combination of methotrexate and leucovorin in human urine samples. Both analytes were converted into highly fluorescent compounds by oxidation with potassium permanganate, and the kinetics of the reaction was continuously monitored by recording full EEM of the samples at different reaction times. A commercial fast scanning spectrofluorometer has been used for the first time to measure the four-way EEM kinetic data. The rapid scanning instrument allows the acquisition of a complete EEM in 12 s at a wavelength scanning speed of 24 000 nm/min. The emission spectra were recorded from 335 to 490 nm at 5-nm intervals, exciting from 255 to 315 nm at 6-nm intervals. Ten successive EEMs were measured at 72-s intervals, to follow the fluorescence kinetic evolution of the mixture components. Good recoveries were obtained in synthetic binary samples and also in spiked urine samples. The excitation, emission, and kinetic time profiles recovered by both chemometric techniques are in good agreement with experimental observations.     

Enzymatic genosensor on streptavidin-modified screen-printed carbon electrodes

Voltammetric enzyme genosensors on streptavidin-modified screen-printed carbon electrodes (SPCEs) for the detection of virulence nucleic acid determinants of pneumolysin and autolysin genes, exclusively present on the genome of the human pathogen Streptococcus pneumoniae, were described. Alkaline phosphatase (AP) and 3-indoxyl phosphate were used as the enzymatic label and substrate, respectively. The oligonucleotide probes were immobilized on electrochemically pretreated SPCEs through the streptavidin/biotin reaction. The adsorption of streptavidin was performed by deposition of a drop of a streptavidin solution overnight at 4 degrees C on the surface of the SPCEs. After the hybridization reaction with FITC-labeled complementary targets, the enzyme is captured using an anti-FITC antibody conjugated to AP. In nonstringent experimental conditions, these genosensors can detect 0.49 fmol of 20-mer oligonucleotide target and discriminate between a complementary oligo and an oligo with a three-base mismatch. In the presence of 25% formamide in the hybridization buffer, a single-base mismatch on the oligonucleotide target can be detected.     

Real-time monitoring of high-temperature corrosion in stainless steels by open-path laser-induced plasma spectrometry

Open-path laser-induced plasma spectrometry (OP-LIPS) represents an appealing alternative for the real-time monitoring of high-temperature processes due to its inherent non-invasive and remote capabilities. In this work, stainless steel samples have been analyzed at 10 meters from the laser source. The effect of the high-temperature conditions to the protective anti-corrosion layer have been analyzed, as well as additional factors such as the type of steel and the exposure time. The number of pulses required to ablate the alteration layer has been found to follow a linear relationship with the square root of the exposure time, in excellent agreement with the off-line thermogravimetric measurements described in the literature.