Vacancy island creation and coalescence using automated scanning tunneling microscopy

We demonstrate that scanning tunneling microscope tip-surface crash events can be utilized as an efficient means for the creation of predefined island configurations for diffusion studies. Using this method, islands of varying size can be created and placed in close proximity, increasing the probability of initiating and observing coalescence events. Data obtained from crash initiated events on a Ag(111) surface are presented. Relaxation time exponents extracted from these data confirm that our method gives results consistent with previous, sputter-obtained island coalescence studies. We also describe an instrument-control routine developed for these measurements that utilizes commercial imaging and off-the-shelf automation software to automate the tracking of islands or other features by the microscope.     

坡口形式对Q345/SUS304异种钢对接接头残余应力和变形的影响

近年来,异种钢焊接接头在工业应用上越来越广泛。在焊接中、厚板的异种钢接头时,为了获得全焊透接头通常需要在工件上准备坡口。由于坡口处需要填充焊缝金属,因此不同的坡口要采用不同的热输入和焊道布置。理论上而言,不同热输入和焊道布置对焊接残余应力与变形会有影响。采用数值模拟与试验手段相结合的方法研究坡口形式对Q345与SUS304异材对接接头的残余应力与变形的影响。以有限元软件ABAQUS为平台,开发热-弹-塑性有限元数值计算方法来模拟板厚为10 mm的V形和X形坡口Q345/SUS304异种钢平板多道焊对接接头的温度场、应力场和焊接变形。采用盲孔法测量V形坡口接头表面的焊接残余应力;分别采用游标卡尺和三坐标仪测量V形和X形坡口接头的横向收缩和角变形。通过比较可知,不论是焊接残余应力还是焊接变形,计算结果与试验结果都吻合较好,验证了计算方法的有效性。研究结果表明,在Q345母材与焊缝交界处的应力分布均出现不连续的现象,而且接头中SUS304侧的高拉伸残余应力区域明显宽于Q345侧。数值结果表明,坡口形式对纵向残余应力的峰值影响较小,而对横向残余应力的峰值有一定影响。试验和数值模拟结果显示V形坡口接头的横向收缩和角变形明显大于X形坡口接头的值。     

Evaluation of Agronomic and Seed Characteristics in Elevated Oleic Acid Soybean Lines in the South-Eastern US

Increasing oleic acid, a monounsaturated fatty acid, is reported to strike the best balance between cold flow properties and oxidative stability in soybean seed oil to enhance biodiesel and produce a better burning fuel. In addition, it is important that elevated oleic acid soybeans have the agronomic traits of local cultivars and maintain oleic acid stability across environments. Research was conducted in 2007–2008 to evaluate six Roundup Ready^® soybean recombinant inbred lines exhibiting enhanced levels of oleic acid. The six elevated oleic lines averaged a 55% increase in oleic acid and a 43% decrease in linolenic acid over the two commercial cultivars (AG3906 and AG4103). Some elevated oleic acid genotypes fulfilled the linear regression definition of a stable genotype. TN03-93RR was the best genotype because of its oleic acid content (397 g kg^?1) and desirable regression estimates for stability. Iodine value (IV), peroxide value (PV), and induction period (IP) were used to evaluate the fuel properties of the two lines with the highest oleic acid content and the two commercial cultivars. The elevated oleic acid lines had significantly better IP, PV and IV for better biodiesel properties and oxidative stability than the two commercial cultivars.     

The seafood supply chain from a fraudulent perspective

Food fraud is an intentional act for economic gain. It poses a risk to food integrity, the economy, public health and consumers’ ethics. Seafood is one commodity which has endured extensive fraudulent activity owing to its increasing consumer demand, resource limitations, high value and complex supply chains. It is essential that these fraudulent opportunities are revealed, the risk is evaluated and countermeasures for mitigation are assigned. This can be achieved through mapping of the seafood supply chains and identifying the vulnerability analysis critical control points (VACCP), which can be exposed, infiltrated and exploited for fraudulent activity. This research systematically maps the seafood supply chain for three key commodities: finfish, shellfish and crustaceans in the United Kingdom. Each chain is comprised of multiple stakeholders across numerous countries producing a diverse range of products distributed globally. For each supply chain the prospect of fraud, with reference to species substitution, fishery substitution, illegal, unreported and unregulated substitution, species adulteration, chain of custody abuse, catch method fraud, undeclared product extension, modern day slavery and animal welfare, has been identified and evaluated. This mapping of the fraudulent opportunities within the supply chains provides a foundation to rank known and emerging risks and to develop a proactive mitigation plan which assigns control measures and responsibility where vulnerabilities exist. Further intelligence gathering and management of VACCPs of the seafood supply chains may deter currently unknown or unexposed fraudulent opportunities.     

Thermodynamic and Experimental Investigations of High-Temperature Refractory Corrosion by Molten Slags

Corrosion mechanisms between MgO refractory substrates and FeNi slags were investigated. The FeNi slags taken into consideration represent a simple synthetically mixed slag with specific oxides and a real slag from a ferroalloy producer. The MgO refractory substrates with the specimens of FeNi slag were heated in a hot-stage microscope at 10 K/min from room temperature to three different temperatures 1573 K, 1723 K, and 1923 K (1300 °C, 1450 °C, and 1650 °C). The experiments were carried out under a controlled gas atmosphere that simulates the relevant process conditions. The corrosion mechanisms of each system were followed by scanning electron microscope analyses. The results obtained showed that slag corrosion dominates, with a pronounced partial dissolution of refractory fines forming Mg-silicates of type forsterite. It was also observed that iron oxide present in the slag diffused into the coarse refractory grains forming magnesiowustite. Finally, the results obtained were compared with those predicted by FACTSAGE software to understand the corrosion mechanisms and draw implications for improving the refractory performance and lifetime.     

An in situ intercalative polymerization method for preparing UV curable clay–polymer nanocomposites

A novel in situ intercalative polymerization technique was used to disperse clay mineral in a precursor resin for use in UV curing by performing an in situ ion exchange reaction during polyesterification. Unmodified montmorillonite (MMT) was added to a reaction mixture composed of monomers and methyl, tallow, bis‐2‐hydroxyethyl ammonium (MTEtOH) during the synthesis of unsaturated polyesters to create resins containing highly dispersed, organically modified MMT. UV‐curable clay–polymer nanocomposite (CPN) films were then prepared utilizing donor–acceptor chemistry through reactions of the unsaturated polyester resin with triethylene glycol divinyl ether. Functional group conversion improved up to 15% by the incorporation of clay mineral into the polymer matrix through the in situ polymerization method. The CPNs also had improved barrier, mechanical, and thermal properties over a control film containing no clay mineral. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42601.