A multigrid accelerated hybrid unstructured mesh method for 3D compressible turbulent flow

 A cell vertex finite volume method for the solution of steady compressible turbulent flow problems on unstructured hybrid meshes of tetrahedra, prisms, pyramids and hexahedra is described. These hybrid meshes are constructed by firstly discretising the computational domain using tetrahedral elements and then by merging certain tetrahedra. A one equation turbulence model is employed and the solution of the steady flow equations is obtained by explicit relaxation. The solution process is accelerated by the addition of a multigrid method, in which the coarse meshes are generated by agglomeration, and by parallelisation. The approach is shown to be effective for the simulation of a number of 3D flows of current practical interest. Sponsored by The Research Council of Norway, project number 125676/410 Dedicated to the memory of Prof. Mike Crisfield, a respected colleague     

Microstructure of Feta Cheese Made Using Different Cultures as Determined by Confocal Scanning Laser Microscopy

ABSTRACT: The objective of this work was to observe the microstructure of feta cheese using confocal scanning laser microscopy. Low fat cheese and cheese containing capsule-producing cultures were made. The protein network was observed using the reflectance mode of the confocal microscope. Fat was stained by Nile red dye diluted with whey. More even distribution of fat with a larger number of smaller globules was observed in cheese made with noncapsule-forming culture compared to that made with the capsule-forming culture. Nonfat cheese had compact structure when made with noncapsule-forming culture which contrasted with the open structure observed in cheese made with the capsule-forming culture     

Expression of three UDP-N-acetyl-alpha-D-galactosamine:polypeptide GalNAc N-acetylgalactosaminyltransferases in adenocarcinoma cell lines

The levels of mRNA expression of three UDP-N-acetyl-alpha-D-galactosamine:polypeptide GalNAc N-acetylgalactosaminyltransferases (GalNAc-transferases) were quantified for human adenocarcinoma cell lines from pancreas, colon, stomach, and breast. Two of the GalNAc-transferases, GalNAc-T1 and GalNAc-T2, were expressed constitutively and at low levels in most or all cell lines examined. A third GalNAc-transferase, GalNAc-T3, was differentially expressed. Well-differentiated adenocarcinoma cell lines expressed high levels and moderately differentiated cell lines expressed lower levels of GalNAc-T3. Cell lines classified as poorly differentiated failed to express GalNAc-T3 mRNA at levels that could be detected by Northern blot analysis. Differential expression of the GalNAc-T3 protein was confirmed in these cell lines by Western blotting. We propose that glycosylation in tumor cell lines may be regulated in part by differential expression of GalNAc-transferases, and we suggest that GalNAc-T3 gene expression may be a molecular indicator of differentiated adenocarcinoma.     

Adaptive stabilization of a class of nonlinear systems using high-gain feedback

This note presents a high-gain feedback stabilizing control algorithm in which the high-gain parameter is adapted on-line. The algorithm is developed for a class of nonlinear systems which can be viewed as the nonlinear counterpart of uniform rank systems. The system can be unknown except for a number of vital pieces of information. For single-input single-output linear systems such information is usually required in the traditional adaptive control literature.     

Complex formation of montmorillonite clay with polymers. Part 2: The use of montmorillonite clay–vinyl monomer complex as a comonomer in the copolymerization reaction of styrene–acrylonitrile monomers

The bulk copolymerization of styrene–acrylonitrile monomers using styrene‐N⁺–montmorillonite complex as a comonomer in the polymerization was studied. The X‐ray diffraction (XRD) analysis showed that part of the styrene‐N⁺–montmorillonite complex remained non‐dispersed (immiscible) and the copolymer was excluded from the interlayer of the immiscible part of the clay. The successive chemical extraction process revealed that a reasonable amount of the styrene–acrylonitrile copolymer was directly attached to the styrene‐N⁺–montmorillonite complex and enveloped the clay. Highly exfoliated clay lamella and nanospheres (3–5 nm) were observed by transmission electron microscopy (TEM). The montmorillonite clay assume two different morphologies, immiscible and exfoliated, on the basis of the XRD and TEM data. A simple method of calculation of the ratio of the exfoliated/immiscible amounts of the clay indicated that the amount of the styrene‐N⁺–montmorillonite complex exfoliated into separate lamella was 40 % (w/w) of the amount of the clay samples containing 2 % of the (styrene‐N⁺–montmorillonite complex) clay. This amount of exfoliated clay decreases with the increase of the concentration of the clay. The presence of the styrene‐N⁺–montmorillonite clay in the copolymerization reaction had a minor effect on both the copolymer composition and the molecular weight. Modification of the clay with the derivatized styrene monomer can achieve a nanocomposite using a percentage no more than 4 % (w/w) of complex in the copolymer. Copyright © 2004 Society of Chemical Industry     

The development and application of a multiple wavelength illumination technique for the vision-based process monitoring of aero-structure riveting

Airframe riveting is a critical process that requires high levels of process monitoring and quality assurance due to the very high risk associated with the failure of such joints. This paper describes the development of the enabling technology developed for a machine vision-based process monitoring system. One of the key factors affecting the performance of a machine vision system is the quality of the lighting. In the application described in this paper the available lighting was severely limited by the confined space in which the system had to operate. The problem was also compounded by the reflective nature of the objects to be examined. The initial images obtained were not suitable for further processing due to the presence of significant shadows and specular reflections. A novel solution to this problem based on multiple wavelength illumination and signal processing is presented along with results from experimental trials of the approach.     

General Solution for the Dynamic Modeling of Parallel Robots

In this paper, we present a general method to calculate the inverse and direct dynamic models of parallel robots. The models are expressed in a closed form by a single equation in which all the elements needed are expressed. The solution is given in terms of the dynamic models of the legs, the dynamics of the platform and some Jacobian matrices. The proposed method is applied in this paper on two parallel robots with different structures. Categories (2), (3).     

Diazepam alters caffeine-induced effects on beta-endorphin levels in specific rat brain regions

The present study was conducted to evaluate the effects of caffeine and the benzodiazepine agonist diazepam, and a combination of both on beta-endorphin (beta-EN) levels in specific rat brain regions. Male Sprague-Dawley rats (150-200 g) adapted to a 12-hour light: 12-hour dark illumination cycle were used in this study. Caffeine (10 mg/kg), diazepam (2 mg/kg) or a combination of caffeine (10 mg/kg) and diazepam (2 mg/kg) were administered intraperitoneally to rats at 11:00 hr. Control animals were injected with saline. Animals were sacrificed by decapitation 1 h after injection, the brains were immediately removed; the cortex, hippocampus, hypothalamus and midbrain were dissected and their B-EN levels measured by radioimmunoassay. Caffeine administration significantly increased B-EN levels in the cortex. Similarly, administration of diazepam alone resulted in a significant increase of B-EN levels in cortex. However, concurrent administration of diazepam and caffeine resulted in higher increase of B-EN levels in cortex. No significant changes in B-EN levels were detected in hippocampus and midbrain after administration of either caffeine or diazepam alone. On the other hand, when diazepam and caffeine were concurrently administered a significant increase of B-EN levels were observed in the midbrain. Moreover, administration of diazepam alone resulted in a significant increase of B-EN levels in hypothalamus. This increase was still observed following concurrent administration of diazepam and caffeine. These results clearly indicate that diazepam alters caffeine-induced effects on B-EN in specific rat brain regions.     

Some factors affecting the electrical properties of carbon-black-loaded butyl rubber during vulcanization

Butyl rubber mixtures loaded with 70 phr general purpose furnace black (GPF) and tetramethyl thiuram disulphide (TMTD)/S as vulcanizing system were prepared. The kinetics of their electrical conductivity development during the vulcanization process were followed by using an especially devised system. It was found that the increase in the electrical conductivity during vulcanization obeys an exponential growth function with time constant τ, which markedly decreases with increasing vulcanization temperature as well as with the efficiency of the vulcanizing system. After completion of the vulcanization process, about 80 min, the samples obtained possess reasonable stability and reproducibility of electrical conductivity.     

Activation process-dependent characteristics of novel thermionic oxide cathodes for CRT application

The emission and conductivity characteristics of oxide cathodes depend largely on the activation process. In this paper, the electrical properties of new type of oxide cathodes for cathode ray tube (CRT) application, supplied by LG Philips Displays, have been investigated in relation to different cathode activation regimes. The influence of the activation process over different durations has been investigated. A temperature of T=1425 K was chosen to be higher than the optimum cathode activation temperature (T=1200 K), and the other temperature of T=1125 K was lower than that. The electron activation energy (E) was found to vary in the range from 0.58 to 2.28 eV for cathodes activated at the higher temperature regime, and from 1.08 to 1.9 eV for those activated at the lower temperature regime. Scanning electron microscopy (SEM) and electron diffraction X-ray (EDX) analyses show a structural phase transformation in the oxide material that was activated at 1125 K for a period of 1-12 hours. The SEM mapping shows a large contamination of Ba in the top layer of oxide material. The activator agents tungsten and aluminum are found to penetrate into the BaO/spl bsol/SrO layer in two different ways.