Development of an Elastoviscoplastic Microstructural-Based Continuum Model to Predict Permanent Deformation in Hot Mix Asphalt

Permanent deformation in hot mix asphalt is caused by a combination of densification (decrease in volume and hence increase in density) and shear deformation. The primary objective of this paper is to develop an elastoviscoplastic model that accounts for the influence of important microstructure properties such as anisotropy and damage on permanent deformation. The model incorporates a yield surface based on the Drucker-Prager function that is modified to capture the influence of stress state on the material response. Also, parameters that reflect the directional distribution of aggregates and damage density in the microstructure are included in this yield surface model. The elastoviscoplastic model is converted into a numerical formulation and is implemented in finite element (FE). The FE model is used in this study to simulate experimental measurements under different confining pressures and strain rates.     

Channel choice and the digital divide in e-government: the case of Egypt

This paper examines channel choice and the digital divide in Egyptian electronic government or e-government. Citizens have access to a variety of service delivery channels when they initiate contact with their government, ranging from e-government to more traditional channels such as the phone and in-person visits to a government office. This paper examines the extent of use of both contact channels for citizens and the impact of the digital divide on channel use. A public opinion survey of Egyptian citizens was analyzed, and the results showed that there was a digital divide in the use of e-government by citizens. The digital divide also extended to other contact channels such as the phone and when citizens used multiple contact channels for public service delivery. The results of this study imply that for the development of e-government, especially in the context of a developing country such as Egypt, policy-makers need to understand that e-government is one of many channels that citizens can use when they initiate contact with their government. The results of this study should encourage policy-makers to recognize the importance of public service delivery in a multichannel environment. Shirin Madon is the accepting Associate Editor for this article. View all notes     

Genetic effects on dairy calf growth

Objectives were to establish growth patterns for weight and height in dairy calves from birth to 90 d and to estimate appropriate genetic parameters. Measurements were 7943 body weights and 7005 wither heights of 752 calves. Represented over 12 yr were three breeds, 348 dams, and 115 sires; data resulted from designed calf nutrition experiments. Sources of variation considered in various least squares analyses of variance were breed, sire in breed, calf in sire in breed, sex of calf, treatment-year category, and several interactions. Repeatabilities of weights and heights between birth and 90 d were .64 and .88; heritabilities were .22 and .30; genetic and phenotypic correlations were .53 and .73. A regression equation was estimated for each calf. From these 752 equations, heritabilities of initial weight, initial height, and rates of growth in weight and height were .53, .50, .44, and .19. Genetic correlations were .81; -.07; -.05; .26; .14; .84. Selection schemes for these traits in dairy cattle should consider that although weights and heights at birth and thereafter are highly and positively correlated genetically, as are gains, birth measurements and gains to 90 d may be uncorrelated.     

Distribution of the carbide phase in the viscoplastic layer during the rotational friction-welding of various steels

The paper presents the viscoplastic phenomena observed during the rotational friction-welding process of high-speed steel M2 (AISI SAE) with carbon steel 1060 (AISI SAE). The structure, phase composition and distribution of the carbide phase in the friction plane and adjoining zones are examined by using optical microscopy (OM) with a system for quantitative analysis, and scanning electron microscopy (SEM) in addition to EDS analysis. The experimentally-checked mathematical relationship is suggested for the calculation of the radial movements of the carbide phase, immediately next to the friction plane. On the basis of qualitative and quantitative evaluation of the microstructural and rheological appearances, a model of carbide phase distribution is also established in the viscoplastic and viscous layers in the area of the friction plane.     

Comparative study on breast milk of mothers delivering preterm and term infants--protein, fat and lactose

Milk samples were collected from 35 mothers delivering preterm infants and from 35 mothers delivering term infants at 3 time intervals over the first 3 weeks of lactation. The samples were collected by manual expression from both breasts into polyethylene containers and were frozen at -20 degrees C and stored for analysis. The protein content of preterm milks during the first and second weeks is higher than that of term milk (P less than 0.05). The fat and lactose contents during the first week are slightly more in term milk than in preterm milk. During the third week the fat content of preterm milk is higher but its lactose content was lower. All these differences are not significant. These results are discussed.     

Infra-red characterization of carbonization of Si surfaces by gas source molecular beam epitaxy

The carbonization and epitaxial growth of cubic SiC films on Si(100) substrates using C₂H₂ and solid Si sources has been investigated by means of infra-red Fourier transform spectroscopy. The carbonization of the Si surface is performed under continuous C₂H₂ flux in two steps: an ordinary process, plus an increase of the substrate temperature to its final value. Subsequent epitaxial films were grown under simultaneous supply of elemental Si and C₂H₂ gas beam. Infra-red reflectivity spectra of samples under different conditions are reported and permit the direct verification for the presence of SiC in carbonized layers, measure the thickness of the films and evaluate their quality.     

Health risk assessment of inorganic arsenic intake of Cambodia residents through groundwater drinking pathway

In order to compare the magnitudes and health impacts of arsenic and other toxic trace elements in well water, groundwater and hair samples were collected from three areas with different arsenic exposure scenarios in the Mekong River basin of Cambodia. Ampil commune in Kampong Cham province was selected as an uncontaminated area, Khsarch Andaet commune in Kratie province was selected as a moderately contaminated area, and Kampong Kong commune in Kandal Province was selected as an extremely contaminated area. Results of ICP-MS analyses of the groundwater samples revealed that As, Mn, Fe and Ba concentrations were significantly different among the three study areas (Kruskal-Wallis test, p < 0.0001). Out of 46 observed wells in the Kandal province study area, 100% detected As > 50 μg L⁻¹ and Fe > 300 μg L⁻¹; 52.17% had Mn > 400 μg L⁻¹ and 73.91% found Ba > 700 μg L⁻¹. In the Kratie province study area (n = 12), 25% of wells showed elevated arsenic levels above 10 μg L⁻¹ and 25% had Mn > 400 μg L⁻¹, whereas samples from Kampong Cham province study area (n = 18) were relatively clean, with As < 10 μg L⁻¹. A health risk assessment model derived from the USEPA was applied to calculate individual risks resulting from drinking groundwater. Computational results indicated that residents from Kandal Province study area (n = 297) confronted significantly higher non-carcinogenic and carcinogenic risks than those in Kratie (n = 89) and Kampong Cham (n = 184) province study areas (Kruskal-Wallis test, p < 0.0001). 98.65% of respondents from the Kandal province study area were at risk for the potential non-cancer effect and an average cancer risk index was found to be 5 in 1000 exposure. The calculations also indicated that, in the Kratie province study area, 13.48% of respondents were affected by non-cancer health risks and 33.71% were threatened by cancer, whereas none of respondents in the Kampong Cham province study area appeared to have non-carcinogenic effect. Positively significant correlations of the arsenic content in scalp hair (As_h) with both arsenic levels in groundwater (As_w) (r_s (304) = 0.757, p < 0.0001) and individual average daily doses (ADD) of arsenic (r_s (304) = 0.763, p < 0.0001) undoubtedly indicated that arsenic accumulation in the bodies of Cambodia residents in the Mekong River basin was mainly through a groundwater drinking pathway. To the best of our knowledge, this is the first comprehensive report comparing individual health risk assessments of arsenic exposure through a groundwater drinking pathway to enriched arsenic levels from groundwater in the Mekong River basin, Cambodia. This study indicates that elevated arsenic concentrations in groundwater may lead to thousands of cases of arsenicosis in the near future if mitigating actions are not taken.