Carbonation durability of blended cement pastes used for waste encapsulation

Blended cement pastes are currently used for encapsulation of low level and intermediate level nuclear waste in the UK. However, there is still little information on the long-term durability of those mixes to some chemical attacks. Accelerated testing may predict the long-term durability or at least help the selection of more durable formulations. In this work, blended blastfurnace slag (BFS)/Portland cement (OPC) pastes containing 60, 75 and 90% BFS and pulverised fuel ash (PFA)/OPC pastes with 40, 55 and 75% PFA were cured at 20 and 60°C for 90 days then submitted to natural and accelerated carbonation (5% CO₂). The effects of the curing temperature as well as the OPC replacement level on the carbonation ratio are presented. Results showed a good correlation between natural and accelerated carbonation for the pastes studied. Carbonation was found to be governed by the amount of calcium hydroxide available in the mixes before the process started.     

Influence of Surface Morphology on the Torsion Fracture of NiTi Endodontic Instruments

This study analyzed the influences of manufacturing process (twisting and machining) and surface finishing on the angular distortion, maximum torque, and toughness of two NiTi endodontic instruments (Race—FKG Dentaire and TF—Twisted Files, SybronEndo). Statistical analysis of results showed that TF instruments (twisted) had higher distortion angle (p < 0.05) and lower maximum torque to fracture (p < 0.05) than Race instruments (machined). SEM analysis of fractured instruments showed a surface morphology characteristic of ductile fracture, with plastic deformation in the helical shafts. The results suggest that both instruments are equally suitable for clinical applications. This study is purely scientific as it evaluates only some material properties, and is not intended to endorse a commercial product.     

Characterization of Microencapsulated Rosemary Essential Oil and Its Antimicrobial Effect on Fresh Dough

This study aimed to characterize rosemary essential oil particles obtained by spray-drying and to evaluate their antimicrobial activity. Measurements of mycelial growth of Penicillium and Aspergillus fungi, isolated from fresh dough, were made applying oil concentrations of 1.0, 5.0, 10.0, 20.0, and 50.0 μL/mL. Fungi and yeast counts in the fresh dough submitted to the control (no oil), pure oil, and microencapsulated oil treatments were also conducted. The microcapsules showed 50 % oil retention after drying, and the major oil components identified were 1,8-cineole (29.0 %), camphor (26.6 %), and α-pinene (10.6 %). The analysis of the particles revealed surfaces without fissures, with a mean particle size of 12.2 μm and presenting an amorphous structure. The growth inhibiting effect of Penicillium sp. fungus, compared to the control, was verified at concentrations of 1.0, 5.0, and 10.0 μL/mL rosemary essential oil, which did not differ among them. For Aspergillus sp., the application of 10.0 μL/mL oil provided greater inhibition compared to 1.0 and 5.0 μL/mL. Complete inhibition occurred with the application of 50.0 μL/mL for both fungal genera tested. At 8 days of dough storage at 25 °C, a decrease of at least 0.7 and 1.5 log cycles of fungal growth was observed in the dough with pure oil and that with microencapsulated oil, respectively, relative to the control. The microencapsulation process retained the antimicrobial property of rosemary essential oil and provided further extension of this activity over time when applied to fresh dough.     

Oxygen reduction reaction on a Pt/carbon fuel cell catalyst in the presence of trace quantities of ammonium ions: An RRDE study

The effect of trace quantities of ammonia on oxygen reduction reaction (ORR) on carbon-supported platinum catalysts in perchloric acid solutions is assessed using rotating ring disk electrode (RRDE) technique. The study demonstrates that ammonia has detrimental effects on ORR. The most significant effect takes place in the potential region above 0.7 V vs RHE. The effect is explained by the electrochemical oxidation of ammonia, which blocks Pt active sites and increases the formation of H₂O₂. This leads to losses in the disk currents and increments in the ring currents. The apparent losses in ORR currents may occur in two ways, namely, through the blocking of the active sites for ORR as well as by generating a small anodic current, which is believed to have a lower contribution. In addition, a detrimental effect of sodium cations in the potential range below 0.75 V vs RHE was demonstrated. This effect is most likely due to the co-adsorption of sodium cations and perchlorate anions on the Pt surface.     

Synthesis and Characterization of Allyl Fatty Acid Derivatives as Reactive Coalescing Agents for Latexes

This work evaluated the use of allyl fatty acid esters derived from vegetable oil (palmitic acid, soybean and sunflower oils) as reactive coalescing agents in a waterborne latex system. Allyl fatty acid derivatives (AFAD) from vegetable oils were synthesized by two different processes. The synthesis was monitored by IR-spectroscopy and the final product characterized by FT-IR, GC–MS, ¹H and ¹³C NMR. The presence of conjugated double bonds in the aliphatic chain was confirmed, which is a determinant for the proposed autoxidative latexes drying mechanism. Each of the AFAD were subsequently added to a standard acrylic emulsion, in order to study its potential as reactive coalescing agent. The minimum film-forming temperature (MFT), glass transition temperature (T _g), drying time and rubbing resistance to solvents were evaluated. The results showed that, when added to water-borne acrylic resins, an AFAD acts as a non-volatile plasticizer capable of autoxidative crosslinking with itself.     

Anaerobic methane oxidation and aerobic methane production in an east African great lake (Lake Kivu)

We investigated CH₄ oxidation in the water column of Lake Kivu, a deep meromictic tropical lake with CH₄-rich anoxic deep waters. Depth profiles of dissolved gases (CH₄ and N₂O) and a diversity of potential electron acceptors for anaerobic CH₄ oxidation (NO₃^?, SO₄^2?, Fe and Mn oxides) were determined during six field campaigns between June 2011 and August 2014. Denitrification measurements based on stable isotope labelling experiments were performed twice. In addition, we quantified aerobic and anaerobic CH₄ oxidation, NO₃^? and SO₄^2? consumption rates, with and without the presence of an inhibitor of SO₄^2?-reducing bacteria activity. Aerobic CH₄ production was also measured in parallel incubations with the addition of an inhibitor of aerobic CH₄ oxidation. The maximum aerobic and anaerobic CH₄ oxidation rates were estimated to be 27?±?2 and 16?±?8?μmol/L/d, respectively. We observed a difference in the relative importance of aerobic and anaerobic CH₄ oxidation during the rainy and the dry season, with a greater role for aerobic oxidation during the dry season. Lower anaerobic CH₄ oxidation rates were measured in presence of molybdate in half of the measurements, suggesting the occurrence of linkage between SO₄^2? reduction and anaerobic CH₄ oxidation. NO₃^? consumption and dissolved Mn production rates were never high enough to sustain the measured anaerobic CH₄ oxidation, reinforcing the idea of a coupling between SO₄^2? reduction and CH₄ oxidation in the anoxic waters of Lake Kivu. Finally, significant rates (up to 0.37?μmol/L/d) of pelagic CH₄ production were also measured in oxygenated waters.     

A new sheep model with automatized analysis of biomaterial-induced bone tissue regeneration

Presently, several bone graft substitutes are being developed or already available for clinical use. However, the limited number of clinical and in vivo trials for direct comparison between these products may complicate this choice. One of the main reasons for this scarcity it is the use of models that do not readily allow the direct comparison of multiple bone graft substitutes, due especially to the small number of implantation sites. Although sheep cancellous bone models are now well established for these purposes, the limited availability of cancellous bone makes it difficult to find multiple comparable sites within a same animal. These limitations can be overcome by the monocortical model here proposed as it consists in 5–6 holes (5 mm Ø), in the femoral diaphysis, with similar bone structure, overlying soft tissue and loading pattern for all defects. Associated to this model, it is also described a fast histomorphometric analysis method using a computer image segmentation test (Threshold method) to assess bone regeneration parameters. The information compiled through the experimental use of 45 sheep in several studies allowed determining that this ovine model has the potential to demonstrate differences in bone-forming performance between various scaffolds. Additionally, the described histomorphometric method is fast, accurate and reproducible.     

Incorporation of Alpha‐Linolenic Acid and Enhancement of n‐3 Fatty Acids in Nile Tilapia: a Factorial Design

A 2² factorial design (two factors at two levels, in triplicate) was performed to investigate the influence of factors A (time of treatment, 15 and 30 days) and B (chia oil content in a supplemented diet, at 2.1 and 4.2 %) in three responses of interest referring to: (a) the incorporation of alpha‐linolenic acid (LNA) in lipids of Nile tilapia fillet; (b) the enhancement of n‐3 fatty acids; and (c) the decrease in the omega‐6/omega3 (n‐6/n‐3) ratio in fish. Factors A and B were significant in the three regression models obtained and the interaction AB was a significant contributor to the LNA and n‐6/n‐3 ratio. Analysis of variance suggested three significant and predictive mathematical models. Response surfaces analyses from designs indicated higher LNA and n‐3 contents and a lower n‐6/n‐3 ratio using both factors A and B in the higher levels (30 days of treatment and 4.2 % of chia oil in the diet for fish) chosen for this study.     

A New Methodology to Evaluate the Cure of Resin-Impregnated Paper for HPL

This paper presents a study on the curing conditions of several resin-impregnated papers and its impact on the performance of HPL (high-pressure decorative laminate). A new methodology for evaluating the bond strength development between the different layers of a HPL(overlay, decorative, and kraft papers) was developed using ABES (Automated Bonding Evaluation System) equipment. The proposed method can be applied to the study of the curing step of the different impregnated paper and the development of bonds between them (overlay paper on decorative paper, decorative paper on kraft paper, and kraft paper on kraft paper) trying to simulate the hot-pressing of an industrial HPL. This will permit to establish a more adapted temperature gradient in hot-press in order to achieve the same curing rate for all layers and provide a good final overall product quality.     

Analysing green supply chain management practices in Brazil’s electrical/electronics industry using interpretive structural modelling

Industries need to adopt the environmental management concepts in the traditional supply chain management. The green supply chain management (GSCM) is an established concept to ensure environment-friendly activities in industry. This paper identifies the relationship of driving and dependence that exists between GSCM practices with regard to their adoption within Brazilian electrical/electronic industry with the help of interpretive structural modelling (ISM). From the results, we infer that cooperation with customers for eco-design practice is driving other practices, and this practice acts as a vital role among other practices. Commitment to GSCM from senior managers and cooperation with customers for cleaner production occupy the highest level.