Mathematical Analysis of Average Response Values for Nonstationary Data

Quantitative results are derived for the accuracy to be associated with average response computations on a wide class of nonstationary physical data as a function of underlying signal and noise properties and the sample size used by the average response computer. Input and output SNR's are defined in terms of these quantities. Statistical confidence bands are determined for both arbitrary probability distributions and for Gaussian probability distributions, which indicate how closely a measured sample mean value approximates the true mean value at any time.     

Ultranarrow Bandwidth Organic Photodiodes by Exchange Narrowing in Merocyanine H‐ and J‐Aggregate Excitonic Systems

Ultranarrowband organic photodiodes (OPDs) are demonstrated for thin film solid state materials composed of tightly packed dipolar merocyanine dyes. For these dyes the packing arrangement can be controlled by the bulkiness of the donor substituent, leading to either strong H‐ or strong J‐type exciton coupling in the interesting blue (H‐aggregate) and NIR (J‐aggregate) spectral ranges. Both bands are shown to arise from one single exciton band according to fluorescence measurements and are not just a mere consequence of different polymorphs within the same thin film. By fabrication of organic thin‐film transistors, these dyes are demonstrated to exhibit hole transport behavior in spin‐coated thin films. Moreover, when used as organic photodiodes in planar heterojunctions with C₆₀ fullerene, they show wavelength‐selective photocurrents in the solid state with maximum external quantum efficiencies of up to 11% and ultranarrow bandwidths down to 30 nm. Thereby, narrowing the linewidths of optoelectronic functional materials by exciton coupling provides a powerful approach to produce ultranarrowband organic photodiodes.     

Self‐Assembling Proteins as High‐Performance Substrates for Embryonic Stem Cell Self‐Renewal

The development of extracellular matrix mimetics that imitate niche stem cell microenvironments and support cell growth for technological applications is intensely pursued. Specifically, mimetics are sought that can enact control over the self‐renewal and directed differentiation of human pluripotent stem cells (hPSCs) for clinical use. Despite considerable progress in the field, a major impediment to the clinical translation of hPSCs is the difficulty and high cost of large‐scale cell production under xeno‐free culture conditions using current matrices. Here, a bioactive, recombinant, protein‐based polymer, termed ZT^Fn, is presented that closely mimics human plasma fibronectin and serves as an economical, xeno‐free, biodegradable, and functionally adaptable cell substrate. The ZT^Fn substrate supports with high performance the propagation and long‐term self‐renewal of human embryonic stem cells while preserving their pluripotency. The ZT^Fn polymer can, therefore, be proposed as an efficient and affordable replacement for fibronectin in clinical grade cell culturing. Further, it can be postulated that the ZT polymer has significant engineering potential for further orthogonal functionalization in complex cell applications.     

Automated industrial IoT-device integration using the OpenPnP reference architecture

Distributed control systems are currently evolving towards industrial Internet of Things (IoT) systems communicating fully using Internet protocols. This creates opportunities for streamlining costly commissioning processes, which today require substantial manual work for installing, configuring, and integrating thousands of actuators and sensors. The vision of “plug-and-produce” control systems has been pursued for more than 15 years, but existing approaches fell short regarding configuration tasks and vendor neutrality. This paper introduces the standards-based IoT reference architecture OpenPnP, which allows largely automating the configuration and integration tasks of industrial commissioning processes. The architecture includes a number of design and technology decisions and the required implementation can be scaled down to resource-constrained industrial devices. This paper demonstrates how OpenPnP can reduce configuration and integration efforts up to 90% in typical settings, while potentially scaling well up to tens of thousands of communicated signals. Practitioners can orient their implementations towards OpenPnP, therefore potentially enabling “plug-and-produce” in many thousands of control systems.     

Shifts in the food of Nile perch (Lates niloticus) in Lake Victoria

The study investigated diet of Nile perch in Lake Victoria and compared results with past data from the same lake in order to analyse diet shifts over time. Fish samples (2020) were collected by seining and trawling from 2012 to 2016. In overall, Caridina nilotica (59%) was the dominant food item in the diet, while Rastrineobola argentea (5%) contributed the least. The diet of Nile perch of 1 cm was copepods, cladocerans and rotifers. The diet changed to only copepods and cladocerans at 2 cm. The proportion of the relatively large calanoids increased with Nile perch size in 1988/89, comprising between 35 and 80% of the diet of fishes of 3–4 cm. Nile perch of 6–25 cm TL fed more on C. nilotica in 2012/2016, compared to 1988/1989 and 2006/08. Haplochromines were fed on more in 2006/2008 than in 2012/2016 by Nile perch of 6–30 cm TL as fish size increased. The frequencies of occurrence of R. argentea in the diet were highest in 1988/1989, and lowest in 2006/2008, for fish size of up to 30 cm TL. The proportion of Odonata in the diet of size class 16–20 and 21–30 cm TL were highest in 2012/2016 and 1988/1989, respectively. Thus, shifts in Nile perch diet was observed from zooplankton to C. nilotica, then to haplochromines and finally to fish prey as size increased. Nile perch preferred haplochromines with C. nilotica as the substitute food. Cannibalism was observed to have decreased, only being evidenced in Nile perch above 35 cm TL, which could actually have a positive impact on the Nile perch fishery. The information on shifts in diet of Nile perch in Lake Victoria is of considerable ecological importance.     

Oxidative dehydrogenation of butenes over Bi‐Mo and Mo‐V based catalysts in a two‐zone fluidized bed reactor

The oxidative dehydrogenation of a 1‐butene/trans‐butene (1:1) mixture to 1,3‐butadiene was carried out in a two‐zone fluidized bed reactor using a Mo‐V‐MgO and a γ‐Bi₂MoO₆ catalyst. The significant operating conditions temperature, oxygen/butene molar ratio, butene inlet height, and flow velocity were varied to gain high 1,3‐butadiene selectivity and yield. Furthermore, axial concentration profiles were measured inside the fluidized bed to gain insight into the reaction network in the two zones. For optimized conditions and with a suitable catalyst, the two‐zone fluidized bed reactor makes catalyst regeneration and catalytic reaction possible in a single vessel. In the lower part of the fluidized bed, the oxidation of coke deposits on the catalyst as well as the filling of oxygen vacancies in the lattice can occur. The oxidative dehydrogenation reaction takes place in the upper zone. Thorough particle mixing inside fluidized beds causes permanent particle exchange between both zones. © 2016 American Institute of Chemical Engineers AIChE J, 63: 43–50, 2017     

Lipid‐like Peptides can Stabilize Integral Membrane Proteins for Biophysical and Structural Studies

A crucial bottleneck in membrane protein structural biology is the difficulty in identifying a detergent that can maintain the stability and functionality of integral membrane proteins (IMPs). Detergents are poor membrane mimics, and their common use in membrane protein crystallography may be one reason for the challenges in obtaining high‐resolution crystal structures of many IMP families. Lipid‐like peptides (LLPs) have detergent‐like properties and have been proposed as alternatives for the solubilization of G protein‐coupled receptors and other membrane proteins. Here, we systematically analyzed the stabilizing effect of LLPs on integral membrane proteins of different families. We found that LLPs could significantly stabilize detergent‐solubilized IMPs in vitro. This stabilizing effect depended on the chemical nature of the LLP and the intrinsic stability of a particular IMP in the detergent. Our results suggest that screening a subset of LLPs is sufficient to stabilize a particular IMP, which can have a substantial impact on the crystallization and quality of the crystal.     

The Effects of Containment on Detonation Velocity

Reactive flow cylinder code runs on six explosives were made with rate constants varying from 0.03 to 70 μs⁻¹. Six unconfined/steel sets of original ANFO and dynamite data are presented. A means of comparing confinement effects both at constant radius and at constant detonation velocity is presented. Calculations show two qualitatively different modes of behavior. For U_s/C_o≥1.2, where U_s is the detonation velocity and C_o the zero‐pressure sound speed in steel, we find a sharp shock wave in the metal. The shock passes through the steel and the outer wall has a velocity jump‐off. For U_s/C_o≤1.04, we find a pressure gradient that moves at the detonation velocity. A precursor pulse drives in the explosive ahead of the detonation front. The outer wall begins to move outward at the same time the shock arrives in the explosive, and the outer wall slowly and continuously increases in velocity. The U_s/C_o≥1.2 cylinders saturate in detonation velocity for thick walls but the U_s/C_o<<1.04 case does not. The unconfined cylinder shows an edge lag in the front that approximately equals the reaction zone length, but the highly confined detonation front is straight and contains no reaction zone information. The wall thickness divided by the reaction zone length yields a dimensionless wall thickness, which allows comparison of explosives with different detonation rates. Even so, a rate effect is found in the detonation velocities, which amounts to the inverse 0.15–0.5 power.