Effect of curing agents on some properties of a polysulfide sealant

The effect of curing agents on the properties of a polysulfide sealant composition was investigated. Commercially used curing agents, namely, lead dioxide, manganese dioxide, and ammonium dichromate, were selected for this study. It was established that curing agents affect joint strengths, stress–strain properties, dynamic mechanical properties, and thermal stability of the sealant. Sealant cured with ammonium dichromate had highest shear bond strength, ultimate tensile strength, modulus, and thermal stability, whereas these properties were lowest for lead-dioxide-cured sealant. Peel bond strength and elongation at break were highest for lead-dioxide-cured sealant. The observed changes in properties were attributed to the difference in crosslink density of the cured sealant, produced by the curing agents. The curing agents have no appreciable effect on the fuel resistance of the polysulfide sealant.     

Simulation Studies of Annealing Effect on a mc-Si Ingot for Photovoltaic Application

Silicon - A multi-crystalline silicon (mc-Si) ingot was grown by the directional solidification (DS) process for photovoltaic (PV) application. We have numerically investigated shear stress and...     

Cu(II), Co(II) and Ni(II) Complexes Installed on Functionalized Silica Surface for Hydrogen Peroxide Assisted Cyclohexane Oxidation

In this work, Cu(II), Co(II) and Ni(II) complexes of the Schiff base ((S,E)-2-(3,4-dimethoxybenzylideneamino)-3-(1H-imidazol-4-yl)propionic acid) were synthesized and subsequently anchored onto amine functionalized silica. They were characterized by FT-IR, UV–vis., ²⁹Si NMR, TG-DTG, ESR, FE-SEM and AFM techniques, and employed as catalysts in cyclohexane oxidation using hydrogen peroxide oxidant. Silica supported Cu(II) catalyst was shown the highest catalytic activity (70%) than rest of the catalysts used. On the other hand, all the complexes were selective as they yield only cyclohexanol and cyclohexanone. Silica supported catalysts were maintained their catalytic activity over five successive catalytic run. As these catalysts are selective, reusable and functioning well with hydrogen peroxide, they could design the environment friendly catalytic system for effective cyclohexane oxidation.     

Adsorption of Chrysoidine R by using fly ash in batch process

This investigation deals with effective utilization of fly ash as adsorbent for the removal of Chrysoidine R from the aqueous solution. The fly ash is a major byproduct generated in coal-based thermal power plants and has good potential for use as an adsorbent. A series of experiments were carried out in a batch adsorption technique to obtain the effect of process variables viz. contact time, pH (2, 4, 6 and 8) initial concentration of the dye (400, 600, 800 and 1000mgL(-1)), amount of the adsorbent (125, 250, 375 and 500mgL(-1)), and temperature (303, 313, 323 and 333K) on adsorption. The concentration of dye was determined by spectrophotometer. The results showed that as the amount of the adsorbent was increased, the percentage of dye removal increased accordingly; higher adsorption percentage was observed at lower concentration of chrysoidine. The adsorption data were analyzed using Langmuir and Freundlich isotherms. The adsorption was found to obey pseudo-first order kinetics. An intra particle diffusion model was used to fit the experimental data. The thermodynamic parameters such as standard change in free energy, enthalpy and entropy of adsorption have been calculated. Adsorption of Chrysoidine R on fly ash was found to be an exothermic reaction.     

Oxidative Transformations of 3,4-Dihydroxyphenylacetaldehyde Generate Potential Reactive Intermediates as Causative Agents for Its Neurotoxicity

Neurogenerative diseases, such as Parkinson’s disease, are associated, not only with the selective loss of dopamine (DA), but also with the accumulation of reactive catechol-aldehyde, 3,4-dihydroxyphenylacetaldehyde (DOPAL), which is formed as the immediate oxidation product of cytoplasmic DA by monoamine oxidase. DOPAL is well known to exhibit toxic effects on neuronal cells. Both catecholic and aldehyde groups seem to be associated with the neurotoxicity of DOPAL. However, the exact cause of toxicity caused by this compound remains unknown. Since the reactivity of DOPAL could be attributed to its immediate oxidation product, DOPAL-quinone, we examined the potential reactions of this toxic metabolite. The oxidation of DOPAL by mushroom tyrosinase at pH 5.3 produced conventional DOPAL-quinone, but oxidation at pH 7.4 produced the tautomeric quinone-methide, which gave rise to 3,4-dihydroxyphenylglycolaldehyde and 3,4-dihydroxybenzaldehyde as products through a series of reactions. When the oxidation reaction was performed in the presence of ascorbic acid, two additional products were detected, which were tentatively identified as the cyclized products, 5,6-dihydroxybenzofuran and 3,5,6-trihydroxybenzofuran. Physiological concentrations of Cu(II) ions could also cause the oxidation of DOPAL to DOPAL-quinone. DOPAL-quinone exhibited reactivity towards the cysteine residues of serum albumin. DOPAL-oligomer, the oxidation product of DOPAL, exhibited pro-oxidant activity oxidizing GSH to GSSG and producing hydrogen peroxide. These results indicate that DOPAL-quinone generates several toxic compounds that could augment the neurotoxicity of DOPAL.     

Room temperature synthesis of high temperature stable lanthanum phosphate–yttria nano composite

A facile aqueous sol–gel route involving precipitation–peptization mechanism followed by electrostatic stabilization is used for synthesizing nanocrystalline composite containing lanthanum phosphate and yttria. Lanthanum phosphate (80 wt%)–yttria (20 wt%) nano composite (LaPO₄–20%Y₂O₃), has an average particle size of ～70 nm after heat treatment of precursor at 600 °C. TG–DTA analysis reveals that stable phase of the composite is formed on heating the precursor at 600 °C. The TEM images of the composite show rod shape morphology of LaPO₄ in which yttria is acquiring near spherical shape. Phase identification of the composite as well as the phase stability up to 1300 °C was carried out using X-ray diffraction technique. With the phases being stable at higher temperatures, the composite synthesized should be a potential material for high temperature applications like thermal barrier coatings and metal melting applications.     

Application of propensity scores and potential outcomes to estimate effectiveness of traffic safety countermeasures: Exploratory analysis using intersection lighting data

More than 5.5 million police-reported traffic crashes occurred in the United States in 2009, resulting in 33,808 fatalities and more than 2.2 million injuries. Significant funds are expended annually by federal, state, and local transportation agencies in an effort to reduce traffic crashes. Effective safety management involves selecting highway and street locations with potential for safety improvements; correctly diagnosing safety problems; identifying appropriate countermeasures; prioritizing countermeasure implementation at selected sites; and, evaluating the effectiveness of implemented countermeasures. Accurate estimation of countermeasure effectiveness is a critical component of the safety management process. In this study, a statistical modeling framework, based on propensity scores and potential outcomes, is described to estimate countermeasure effectiveness from non-randomized observational data. Average treatment effects are estimated using semi-parametric estimation methods. To demonstrate the framework, the average treatment effect of fixed roadway lighting at intersections in Minnesota is estimated. The results indicate that fixed roadway lighting reduces expected nighttime crashes by approximately 6%, which compares favorably to other, recent lighting-safety research findings.     

Cobalt(III)-mediated oxidative destruction of phenol using divided electrochemical cell

Mediated electrochemical oxidation is one of the suitable processes for the destruction of hazardous organic compounds and the dissolution of nuclear wastes at ambient temperature and pressure. The electrochemical oxidation of Co(II) was carried out in an undivided and divided electrochemical cell. The formation of Co(III) was studied in an divided electrochemical cell by varying conditions such as temperature and concentration of nitric acid in a batch type electrochemical reactor in recirculation mode. It was found that the formation of Co(III) increased with increasing nitric acid concentration and decreased with increasing temperatures. The produced Co(III) oxidant was then used for the destruction of phenol. It was noted that phenol could be mineralized to CO₂ and water by Co(III) in nitric acid under different nitric acid concentrations and temperatures. The evolved CO₂ was continuously measured and used for the calculation of destruction efficiency. The destruction was increased with increasing nitric acid concentration as well as the temperature. The maximum efficiency was observed to be 78% based on CO₂ evolution for 5,000 ppm phenol solution at 60 °C in a continuous feed mode. The destruction efficiency was increased 28% by addition of silver at 25 °C.     

Comparative study on natural antioxidant as an aging retardant for natural rubber vulcanizates

The research aim is mainly to investigate the effectiveness of natural antioxidant (NA) obtained from oil palm leaves (Elaeis guineensis) as an aging retardant in natural rubber (NR) vulcanizates. Comparison of NA with other commercial antioxidants, trimethyl quinoline (TMQ) and butylated hydroxy toluene (BHT), is investigated. The effect of natural and commercial antioxidants on NR vulcanizates was explored before and after aging. Aging test was carried out at 70°C for three different periods, 4, 7, and 14 days to determine aging property by performing the tensile and tear tests. NA shows lower tensile properties, crosslink density, tack strength but high tear strength compared to the commercial antioxidants, BHT and TMQ. However, upon aging NR vulcanizates with NA retains its properties equivalent to that of commercial antioxidants, BHT and TMQ. Thus, NA can be used as an aging retardant for short‐term protection in application requiring moderate tensile properties and can be used as alternative source for commercial antioxidant. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Double Layer Coatings: A New Technique for Maintaining Physico-Chemical Characteristics and Antioxidant Properties of Dragon Fruit During Storage

A double layer coating was evaluated for maintenance of quality of dragon fruit during storage at 10?±?2 °C and 80?±?5 % RH for 28 days. Significant differences (p?<?0.05) were observed between control and the treated fruit. However, a double layer coating with 600 nm droplet size?+?1.0 % conventional chitosan showed promising results in all the tested parameters, while the fruit treated with 1,000 nm droplet size?+?1.0 % conventional chitosan showed some negative effects on fruit surface. Increase in weight loss was 12.0 % in fruit treated with 600 nm droplet size and 1.0 % conventional chitosan as compared to the control. Antioxidants and gaseous analysis also proved the efficacy of double layer coatings with 600 nm droplet size?+?1.0 % conventional chitosan. Thus it can be concluded from the present investigation that double layer coating could be used for maintaining quality in dragon fruit for up to 28 days without any off-flavours.