STD‐NMR‐Based Protein Engineering of the Unique Arylpropionate‐Racemase AMDase G74C

Structure‐guided protein engineering achieved a variant of the unique racemase AMDase G74C, with 40‐fold increased activity in the racemisation of several arylaliphatic carboxylic acids. Substrate binding during catalysis was investigated by saturation‐transfer‐difference NMR (STD‐NMR) spectroscopy. All atoms of the substrate showed interactions with the enzyme. STD‐NMR measurements revealed distinct nuclear Overhauser effects in experiments with and without molecular conversion. The spectroscopic analysis led to the identification of several amino acid residues whose substitutions increased the activity of G74C. Single amino acid exchanges increased the activity moderately; structure‐guided saturation mutagenesis yielded a quadruple mutant with a 40 times higher reaction rate. This study presents STD‐NMR as versatile tool for the analysis of enzyme–substrate interactions in catalytically competent systems and for the guidance of protein engineering.     

Change in liquid temperature behind the impeller blades with impeller speed in boiling stirred tanks

In our previous study (Fukuda, R., Tokumura, M., Znad, H.T. and Kawase, Y., 2009, Vapour generation from the impellers in boiling stirred tank reactors. Chem Eng Res Des, 87: 452–459), it was found that in boiling stirred tanks with multiple impeller systems vapour was generated from the heater at lower impeller speeds and with an increase in impeller speed most vapour was generated from the top impeller rather than the lower impellers and the heater. The change of nucleation sites with the impeller speed might be controlled by the local liquid temperature. Therefore we measured the liquid temperature behind the impellers blades and found the decrease in liquid temperature with increasing impeller speed. In this paper, a simple model was developed to predict the change in liquid temperature behind the impeller blades in which nucleation takes place. In the proposed model based on the results for pressure distribution on the impeller blade in the literature, the liquid temperature behind the impeller blades is estimated from the measured power consumption. The validation of the proposed model was conducted using the experimental results in our previous study and reasonable agreement was obtained.     

Photoluminescence Analysis of Iron Contamination Effect in Multicrystalline Silicon Wafers for Solar Cells

We investigated the effect of Fe contamination on the electronic properties of dislocation clusters in relation to oxygen precipitation in multicrystalline silicon (mc-Si). Photoluminescence (PL) spectroscopy and mapping were performed at room and liquid-He temperatures on mc-Si wafers before and after Fe contamination. PL spectra consisted of the band-edge emission, the 0.78-eV emission associated with oxygen precipitates, and the dislocation-related D-lines. The Fe contamination increased the electrically active dislocation clusters. Part of these clusters acted as preferential oxygen precipitation sites, and their electronic properties were not further influenced by the Fe contamination.     

Pt and Sn Doped Sputtered CeO2 Electrodes for Fuel Cell Applications

The interaction of Pt with CeO₂ layers was investigated by using photoelectron spectroscopy. Thirty‐nanometre‐thick Pt and Sn doped CeO₂ layers were deposited simultaneously by rf‐magnetron sputtering on a Si(001) substrate and a carbon diffusion layer of a polymer membrane fuel cell by using a composite CeO₂–Pt–Sn target. The laboratory XPS and synchrotron radiation soft X‐ray and hard X‐ray photoemission spectra showed the formation of cerium oxide with completely ionised Pt^2+,4+ species, and with Pt⁴⁺ embedded in the film bulk. Hydrogen/air fuel cell activity measurements normalised to the amount of Pt used revealed high specific power of up to 5.4 × 10⁴ mW mg^–1 (Pt). The activity of these materials is explained by the strong activity of embedded Ptⁿ⁺ cations.     

Identification of yeast strains isolated from marcha in Sikkim, a microbial starter for amylolytic fermentation

Marcha or murcha is a traditional amylolytic starter used to produce sweet-sour alcoholic drinks, commonly called jaanr in the Himalayan regions of India, Nepal, Bhutan, and Tibet (China). The aim of this study was to examine the microflora of marcha collected from Sikkim in India, focusing on yeast flora and their roles. Twenty yeast strains were isolated from six samples of marcha and identified by genetic and phenotypic methods. They were first classified into four groups (Group I, II, III, and IV) based on physiological features using an API test. Phylogenetic, morphological, and physiological characterization identified the isolates as Saccharomyces bayanus (Group I); Candida glabrata (Group II); Pichia anomala (Group III); and Saccharomycopsis fibuligera, Saccharomycopsis capsularis, and Pichia burtonii (Group IV). Among them, the Group I, II, and III strains produced ethanol. The isolates of Group IV had high amylolytic activity. Because all marcha samples tested contained both starch degraders and ethanol producers, it was hypothesized that all four groups of yeast (Group I, II, III, and IV) contribute to starch-based alcohol fermentation.     

Enhancement of thermostability of kojibiose phosphorylase from Thermoanaerobacter brockii ATCC35047 by random mutagenesis

Random mutation by error-prone PCR was introduced into kojibiose phosphorylase from Thermoanaerobacter brockii ATCC35047. One thermostable mutant enzyme, D513N, was isolated. The D513N mutant enzyme showed an optimum temperature of 67.5-70 degrees C (the wild type, 65 degrees C), and thermostability up to 67.5 degrees C (the wild type, up to 60 degrees C). The half-lives of D513N were estimated to be 135 h at 60 degrees C, 110 min at 70 degrees C and 6 min at 75 degrees C, respectively. They were about 1.6-fold, 7-fold and 6-fold longer than those of the wild-type enzyme, respectively.     

Heat Source in Infinite Plane with Elliptic Rigid Inclusion and Hole

The plane thermoelastic problems of a stationary heat source in an infinite plane with an elliptic rigid inclusion and an elliptic hole are analyzed under thermally adiabatic and isothermal boundary conditions. The problems of an elliptic rigid inclusion are derived for the following cases: (1) the case that there are rigid-body displacement and rotation; and (2) the case that there is no rigid-body displacement or rotation. To analyze these problems, the following three fundamental solutions are derived: Problem A, in which a point heat source exists within an infinite domain; Problem B, in which the inclusion has a small amount of rotation; and Problem C, in which the inclusion is subjected to concentrated loads. Two cases can be obtained by superimposing these fundamental solutions. For the hole problem, the fundamental solution (Green's function) is also derived. In analysis, the complex stress functions, the mapping function, and the thermal dislocation method are used. The complex stress functions are obtained as a closed form. For analytic examples, the stress distributions are shown under thermally adiabatic and isothermal boundary conditions. For the crack problem, the stress intensity factors are shown for the location of the heat source.     

Optimization of interface structures in crystalline silicon heterojunction solar cells

In heterojunction solar cells consisting of hydrogenated amorphous silicon (a-Si:H) and crystalline silicon (c-Si), suppression of epitaxial growth at the heterointerface is found to be crucial to achieve high solar cell efficiencies. In order to avoid the epitaxial growth, wide-gap hydrogenated amorphous silicon oxide (a-SiO:H) has been applied to the heterojunction solar cells. We have fabricated a-SiO:H/c-Si solar cells using n-type and p-type c-Si substrates and demonstrated that incorporation of the a-SiO:H i layer prevents the harmful epitaxial growth at the heterointerface completely.     

Luminescent properties of doped freestanding silicon nanocrystals embedded in MEH-PPV

We demonstrate that the electrochemical etching and pulverization of porous silicon films allow the fabrication of boron- and phosphorous-doped freestanding silicon nanocrystals (Si-ncs). The presence of boron in freestanding Si-ncs was confirmed from low-temperature photoluminescence (PL) analysis. The temperature dependence of PL for both types of doped Si-ncs reveals two PL bands due to the quantum confinement effect and surface state defects. Blending of Si-ncs into poly[methoxy-ethylexyloxy-phenylenevinilene] polymer leads to suppression of the PL band originated from surface states. More importantly, those blends showed a photoconductivity response under illumination AM1.5 at room temperature.     

Back surface reflectors with periodic textures fabricated by self-ordering process for light trapping in thin-film microcrystalline silicon solar cells

Back surface reflectors (BSRs) with grating structures have been developed to enhance light trapping in thin-film hydrogenated microcrystalline Si (μc-Si:H) solar cells. As a grating structure, a periodic honeycomb-like dimple pattern with a period of ～450 nm has been fabricated on Al substrates by a self-ordering process using anodic oxidation of Al. The clear diffraction effect has been confirmed on the patterned Al from the angle-dependent reflection. From quantum efficiency measurements, we found that the periodically patterned BSR can confine the incident light more effectively than the random textured BSR, especially at longer wavelengths.