Functionalized Hybrid Coatings on ABS Surfaces by PLD and Dip Coatings

It is important to give water-repellent and antibacterial properties to the acrylonitrile butadiene styrene (ABS) surfaces of the hearing aids. In this study, the sol–gel Si and sol–gel Ti solutions were prepared from the reactions of silicon ethoxide, titanium butoxide and methacrylic acid. The catalyst and Dynasylan F8815 were added to the sol–gel solutions to give hydrophobic properties onto the ABS surfaces. Additionally, silver nanoparticles were synthesized by nanosecond laser and added to the coating solutions to give extra antibacterial properties. The surfaces of the ABS targets were coated using the sol–gel dip coating and pulsed laser deposition techniques. The coatings with good adhesion between film and substrate and good water-repellent properties were achieved. The average contact angles for the coated ABS surfaces were measured in the range between 120 and 125 degrees. The obtained sol–gel materials and produced thin films onto the ABS surfaces were also analyzed in terms of the antibacterial properties. The highly antibacterial properties were observed in the sol–gel solutions and the thin films.     

Utilization of Electrospun Polystyrene Membranes as a Preliminary Step for Rapid Diagnosis

Recent advances in clinical practice drive deoxyribonucleic acid (DNA) as an important class of biomarker. Monitoring the change in their concentration suggests the initiation and/or progression of various disorders. However, low quantity of DNA biomarkers in body fluids requires a delicate isolation methodology that provides efficient separation and easy handling. This study describes a newer‐generation separation technology relying on electrospun fibers of sub‐micrometer diameter of a commodity polymer for DNA biomarkers in simulative serum. Fibrous polystyrene membranes are prepared by electrospinning and they are subjected to post‐modification with Au. The composite membranes may provide a convenient environment for the removal of bovine serum albumin (BSA) from BSA and DNA mixtures. The eluent can be used as an efficient tool for detection of DNA biomarkers associated with diagnosis of numerous life‐threatening diseases.

     

AC susceptibility and FC-ZFC magnetic properties of SrTb_xFe_(12-x)O_(19) and SrTm_xFe_(12-x)O_(19) hexaferrites:a comparative study

In this comparative study,Tb and Tm substituted Sr-hexafe rrites(HFs) with the chemical compositions of SrTb_xFe_(12-x)O_(19) and SrTm_xFe_(12-x)O_(19)(x=0.00,0.02 and 0.04) were fabricated via citrate sol-gel approach.The AC susceptibility and FC-ZFC magnetization were investigated.The product structure and morphologies were also investigated via XRD,TEM and SEM along with EDX.Measurements of temperature dependence of magnetization M-T and AC magnetic susceptibility versus temperature were carried out.The various synthesized HFs displayed ferrimagnetic behavior within 10-325 K.At lower temperatures,super-spin glass-like behavior was noticed.Neel-Arrhenius and Vogel-Fulcher models were employed to explore the experimental data of AC susceptibility.     

Preparation and evaluation of linseed oil based alkyd paints

Alkyd resins are produced with reaction of oil or fatty oil, polyol and polyacid. Alkyd resins are commonly used in coating and paint industry due to ease of application in changing environmental conditions. Linseed oil based paints executed all requirements of technical properties, drying time, storage properties, simplicity in maintenance, appearance, economy, etc. In this study, linseed oil based alkyd resins having different oil contents were synthesized     

Investigation of UV and I–V characteristics of high refractive index polymer thin film for optoelectronic applications

In this study, high refractive index polymer (HRIP) [poly(pentabromobenzyl methacrylate-co-glycidyl methacrylate)] was investigated to obtain its optical and electrical performance for optoelectronic applications. UV characteristics of the polymer in solution of tetrahydrofuran were obtained and optical band gap energy of the polymer was calculated as 3.8 eV. I–V characteristics of the polymer were investigated after HRIP thin film was prepared using spin coating technique. The electrical parameters such as barrier height Φ_Bo, ideality factor n and reverse saturation current I_o were extracted from the forward biasing I–V characteristics. At the same time, series resistance R_s and Φ_Bo were determined by using a modified Norde function combined with conventional forward I–V method.     

From a Non-Local Ambrosio-Tortorelli Phase Field to a Randomized Part Hierarchy Tree

In its most widespread imaging and vision applications, Ambrosio and Tortorelli (AT) phase field is a technical device for applying gradient descent to Mumford and Shah simultaneous segmentation and restoration functional or its extensions. As such, it forms a diffuse alternative to sharp interfaces or level sets and parametric techniques. The functionality of the AT field, however, is not limited to segmentation and restoration applications. We demonstrate the possibility of coding parts—features that are higher level than edges and boundaries—after incorporating higher level influences via distances and averages. The iteratively extracted parts using the level curves with double point singularities are organized as a proper binary tree. Inconsistencies due to non-generic configurations for level curves as well as due to visual changes such as occlusion are successfully handled once the tree is endowed with a probabilistic structure. As a proof of concept, we present (1) the most probable configurations from our randomized trees; and (2) correspondence matching results between illustrative shape pairs. The work is a significant step towards establishing exponentially decaying diffuse distance fields as bridges between low level visual processing and shape computations.     

Variation of part thickness and compaction pressure in vacuum infusion process

In vacuum infusion (VI), it is difficult to manufacture a composite part with small dimensional tolerances, since the thickness of the part changes during resin injection. This change of thickness is due to the effect of varying compaction pressure on the upper mold part, a vacuum bag. In this study, random fabric layers with an embedded core distribution medium is used. The thickness of the composite part and resin pressure are monitored using multiple dial gages and pressure transducers; the results are compared with the model developed by Correia et al. [Correia NC, Robitaille F, Long AC, Rudd CD, Simacek P, Advani SG. Analysis of the vacuum infusion molding process: I. Analytical formulation. Composites Part A: Applied Science and Manufacturing 26, 2005. p. 1645–1656]. To use this model, two material characteristics databases are constructed based on the process parameters: (i) the thickness of a dry/wet fabric preform at different compaction pressures, and (ii) the permeability of the preform at different thicknesses. The dry-compacted preform under vacuum is further compacted due to fiber settling in wet form after resin reaches there; the part thickens afterwards as the resin pressure increases locally. The realistic model solution can be achieved only if the compaction characterization experiments are performed in such a way that the fabric is dry during loading, and wet during unloading, as in the actual resin infusion process. The model results can be used to design the process parameters such as vacuum pressure and locations of injection and ventilation tubes so that the dimensional tolerances can be kept small.