Assessment of a fuzzy logic based MRAS observer used in a photovoltaic array supplied AC drive

In this paper a fuzzy logic (FL) based model reference adaptive system (MRAS) speed observer for high performance AC drives is proposed. The error vector computation is made based on the rotor-flux derived from the reference and the adaptive model of the induction motor. The error signal is processed in the proposed fuzzy logic controller (FLC) for speed adaptation. The drive employs an indirect vector control scheme for achieving a good closed loop speed control. For powering the drive system, a standalone photovoltaic (PV) energy source is used. To extract the maximum power from the PV source, a constant voltage controller (CVC) is also proposed. The complete drive system is modeled in MATLAB/Simulink and the performance is analyzed for different operating conditions.     

Position-specific chemical modification and quantitative proteomics disclose protein orientation adsorbed on silica nanoparticles

We describe a method for determining the orientation of cytochrome c, RNase A, and lysozyme on silica nanoparticles (SNPs) using chemical modification combined with proteolysis-mass spectrometry. The proteins interacted with SNPs through preferential adsorption sites, which are dependent on SNP diameter; 4 nm SNPs induce greater structural stabilization than 15 nm particles, presumably due to greater surface curvature of the former. These results suggest that nanoparticle size and protein structure influence protein orientation on SNPs.     

Green synthesis of biocompatible gold nanoparticles using Fagopyrum esculentum leaf extract

This report describes the use of ethnolic extract of Fagopyrum esculentum leaves for the synthesis of gold nanoparticles. UV-visible spectroscopy analysis indicated the successful formation of gold nanoparticles. The synthesized nanoparticles were characterized by transmission electron microscopy (TEM), high resolution TEM (HRTEM) and were found to be spherical, hexagonal and triangular in shape with an average size of 8.3 nm. The crystalline nature of the gold nanoparticles was confirmed from X-ray diffraction (XRD) and selected-area electron diffraction (SAED) patterns. Fourier transform infrared (FT-IR) and energy-dispersive X-ray analysis (EDX) suggested the presence of organic biomolecules on the surface of the gold nanoparticles. Cytotoxicity tests against human HeLa, MCF-7 and IMR-32 cancer cell lines revealed that the gold nanoparticles were non-toxic and thus have potential for use in various biomedical applications.     

Crystallographic evaluation of sodium zirconium phosphate as a host structure for immobilization of cesium

Sodium zirconium phosphate (NZP) is a potential material for immobilization of nuclear effluents. The existence of cesium containing NZP structure was determined on the basis of crystal data of solid solution. It was found that up to ~9.0 wt% of cesium could be loaded into NZP formulations without significant changes of the three-dimensional framework structure. The crystal chemistry of Na_1−x Cs _x Zr₂P₃O₁₂ (x = 0.1–0.4) has been investigated using General Structure Analysis System programming. The CsNZP phases crystallize in the space group R-3c and Z = 6. Powder diffraction data have been subjected to Rietveld refinement to arrive at a satisfactory structural convergence of R-factors. The unit cell volume and polyhedral (ZrO₆ and PO₄) distortion increase with rise in the mole% of Cs⁺ in the NZP matrix. The PO₄ stretching and bending vibrations in the infrared region have been assigned. SEM, TEM, and EDAX analysis provide analytical evidence of cesium in the matrix.     

Effect of nanoclay on positive temperature coefficient to resistivity characteristics of high density polyethylene/silver‐coated glass bead composites

Positive temperature coefficient to resistivity characteristics of high density polyethylene (HDPE)/silver (Ag)‐coated glass bead (45 wt%) composites, without and with nanoclay, has been investigated with reference to HDPE/carbon black (CB) (10 wt%) composites. Plot of resistivity versus temperature of HDPE/CB (10 wt%) composites showed a sudden rise in resistivity (PTC trip) at ≈128°C, close to the melting temperature (T_m) of HDPE. However, for HDPE/Ag coated glass bead (45 wt%) composites, the PTC trip temperature (≈88°C) appeared well below the T_m of HDPE. Addition of 1 phr clay in the composites resulted in an increase in PTC trip temperature of HDPE/Ag‐coated glass bead (45 wt%) composites, whereas no significant effect of clay on PTC trip temperature was evident in HDPE/CB/clay composites. We proposed that the PTC trip temperature in HDPE/Ag‐coated glass bead composites was governed by the difference in coefficient of thermal expansion of HDPE and Ag‐coated glass beads. The room temperature resistivity and PTC trip temperature of HDPE/Ag‐coated glass bead (45 wt%) composites were found to be very stable on thermal cycling. Dynamic mechanical analyzer results showed higher storage modulus of HDPE/Ag‐coated glass bead (45 wt%) composites compared with the HDPE/CB (10 wt%) composites. Thermal stability of HDPE/Ag‐coated glass bead (45 wt%) composites was also improved compared with that of HDPE/CB (10 wt%) composites. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Growth of aligned hexagonal ZnO nanorods on FTO substrate for dye-sensitized solar cells (DSSCs) application

This article reports a facile growth of well-crystalline aligned hexagonal ZnO nanorods on fluorine-doped tin-oxide (FTO) substrate via non-catalytic thermal evaporation process. The morphological investigations done by field-emission scanning electron microscope (FESEM) and transmission electron microscopy (TEM) reveal that the grown products are aligned hexagonal ZnO nanorods which are grown in a very high density over the whole substrate surface. The detailed structural properties observed by high-resolution TEM equipped with selected area electron diffraction (SAED) and X-ray diffraction (XRD) pattern confirmed that the synthesized nanorods are well-crystalline possessing wurtzite hexagonal phase and preferentially grown along the c-axis direction. A sharp and strong UV emission at 381 nm in room-temperature photoluminescence (PL) spectrum showed that the as-grown ZnO nanorods possess excellent optical properties. The as-grown nanorods were used as photo-anode for the fabrication of dye-sensitized solar cells (DSSCs) which exhibits an overall light-to-electricity conversion efficiency (ECE) of 0.7% with V(oc) of 0.571 V, J(sc) of 2.02 mA/cm2 and FF of 0.58.     

Response of growing Japanese quails to dietary concentration of L‐threonine

The influence of dietary levels of L ‐threonine (Thr) on growth and immune response was investigated in growing (0–5 weeks of age) Japanese quails (n = 288). Three dietary treatments were formulated using three levels of Thr [9.6, 10.2 and 11.2 kg^?1 diet dry matter (DM)] at a fixed protein level of 233 g kg^?1 and an energy level of 12.15 MJ (2900 kcal) metabolizable energy (ME) kg^?1 feed dry matter. A metabolism trial with a 3‐day collection period was conducted at the third week of age employing all the birds. The cell‐mediated (using PHA‐P) and humoral (SRBC response) immune responses were measured at the fourth week of age. Carcass traits were assessed at the end of fifth week of age. Body weight gain was lower (P < 0.01) in birds received 9.6 g Thr kg^?1 DM than in groups fed 10.2 g or 11.2 g kg^?1 DM in the diet, but there was no significant difference in gain between the groups fed 10.2 or 11.2 g Thr kg^?1 DM in the diet. Feed intake differed significantly owing to Thr levels being lowest (P < 0.05) at 9.6 g Thr kg^?1 DM in the diet. Feed conversion ratio (FCR), protein efficiency and energy efficiency improved at the 11.2 g kg^?1 level from 0 to 3 weeks of age; however, from 3 to 5 weeks of age, better FCR emanated from a diet with 9.6 g Thr kg^?1 DM. The nitrogen balance did not differ (P > 0.05) with Thr level. Carcass traits, relative weight of immune organs and cell‐mediated (PHA‐P) and humoral (SRBC response) immune responses did not differ significantly (P > 0.05) as a result of the dietary treatments. Copyright © 2006 Society of Chemical Industry     

Sorptive removal of methylene blue from aqueous solutions by polymer/activated charcoal composites

In this study, a new sorbent, a poly(acrylamide‐co‐itaconic acid) [P(AAm‐co‐IA)]/activated charcoal (AC) composite, was prepared by the aqueous polymerization of acrylamide and itaconic acid in the presence of AC with N,N′‐methylene bisacrylamide as a crosslinker and potassium persulfate as an initiator. The P(AAm‐co‐IA)/AC composite sorbent showed a fair capacity to adsorb the cationic dye methylene blue. The maximum sorption capacity, as studied at 23, 37, and 50°C and determined with the Langmuir isotherm model, was found to be 909.0, 312.5, and 192.3 mg/g, respectively. For an initial concentration of 5 mg/L, the kinetic uptake data were studied with various kinetic models. The pseudo‐second‐order equation was found to fairly fit the uptake data with a regression value of 0.999. The dye uptake increased with the pH of the sorbate solution, and the optimum pH was found to be in the range of 7–10. Intraparticle diffusion was also observed to take place, and the coefficient of intraparticle diffusion was evaluated to be 26.51 × 10^?2 mg g^?1 min^?1/2. The various thermodynamic parameters were also determined to predict the nature of the uptake process. The sorption process was found to be spontaneous, as indicated by a negative standard free energy change. The negative standard enthalpy change suggested an exothermic nature for the uptake. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011