Tape casting of strontium and cobalt doped lanthanum chromite suspensions

Lanthanum chromite (LaCrO₃) is currently the most widely studied material as interconnector layers for solid oxide fuel cells (SOFC). The complexity of microstructures and geometries of SOFC devices, which are usually built-up by lamination of the different constitutive layers, make it necessary a precise control of processing parameters to achieve the desired combination of properties. Much effort has been devoted to the processing of electrodes and electrolytes but the other layers, such as that of interconnecting material, have received scarce attention. This work deals with the preparation and optimisation of the rheological behaviour of concentrated suspensions of Sr- and Co-doped LaCrO₃ and the subsequent tape casting to produce homogeneous thin sheets to be used in the SOFC stack.The starting powder was produced by combustion synthesis from the corresponding nitrates and urea as a fuel, and had a final composition of La_0.80Sr_0.20Cr_0.92Co_0.08O₃. These powders were dispersed in ethanol with commercial copolymers (Hypermer, KD6) to solids loading of up to 58 wt%. The binding system (BS) consisted of a mixture of a binder, polyvinyl butyral-co-vinyl alcohol-co-vinyl acetate (PVA-PVAc), and two plasticizers, polyethyleneglycol (PEG400) and benzylbutylphthalate (BBP). The effect of the binding system content and the binder-to-plasticizer ratio on the tape casting performance and the characteristics of the green and the sintered tapes, were studied, as well as the influence of the casting parameters (casting speed and blades height).     

Experimental design of the kinetic resolution of a key precursor of high‐value bioactive myo‐inositols by an immobilized lipase

BACKGROUND: The response surface methodology was successfully applied to the optimization of the reaction variables for the kinetic resolution of a precursor of high‐value myo‐inositols, ( ± )‐1,2‐O‐isopropylidene‐3,6‐di‐O‐benzyl‐myo‐inositol (( ± )‐1), by Novozym 435. The resolutions were run separately, with two acylating agents, ethyl acetate and vinyl acetate, in a solvent‐free system. The variables analyzed were reaction temperature, substrate concentration, water concentration and enzyme activity. A statistical model was employed for the evaluation of the influence of the variables on conversion and enantiomeric excess (ee). RESULTS: The optimal conditions for this resolution using vinyl acetate as acylating agent were 45 °C, 5 mg mL^?1 of substrate, 71 U of enzyme activity and 0%w/w of water concentration. The high conversion (49.2 %) and ee (>99%) reached in the chemoenzymatic synthesis of acylated product, L‐(?)‐5‐O‐Acetyl‐3,6‐di‐O‐benzyl‐1,2‐O‐isopropylidene‐myo‐inositol, secure the efficient synthesis of the D enantiomorph present in the original racemic mixture (( ± )‐1) as well. CONCLUSIONS: The use of the experimental design strategy was productive, leading to a 14‐fold increase in the productivity of the reaction compared with the non‐optimized conditions. Both derivative L‐(?)‐2 and remaining substrate D‐(+)‐1 were obtained at high ee. © 2012 Society of Chemical Industry     

Multi-View Scene Capture by Surfel Sampling: From Video Streams to Non-Rigid 3D Motion,Shape and Reflectance

In this paper we study the problem of recovering the 3D shape, reflectance, and non-rigid motion properties of a dynamic 3D scene. Because these properties are completely unknown and because the scene's shape and motion may be non-smooth, our approach uses multiple views to build a piecewise-continuous geometric and radiometric representation of the scene's trace in space-time. A basic primitive of this representation is the dynamic surfel, which (1) encodes the instantaneous local shape, reflectance, and motion of a small and bounded region in the scene, and (2) enables accurate prediction of the region's dynamic appearance under known illumination conditions. We show that complete surfel-based reconstructions can be created by repeatedly applying an algorithm called Surfel Sampling that combines sampling and parameter estimation to fit a single surfel to a small, bounded region of space-time. Experimental results with the Phong reflectancemodel and complex real scenes (clothing, shiny objects, skin) illustrate our method's ability to explain pixels and pixel variations in terms of their underlying causes—shape, reflectance, motion, illumination, and visibility.     

Chemical and microbiological quality of grass carp (Ctenopharyngodon idella) slaughtered by different methods

The effect of two slaughter methods (immersion in ice-water slurry and electrical stunning followed by ice slurry asphyxiation) on chemical and microbiological parameters of grass carp (Ctenopharyngodon idella) stored in ice for 20 days was evaluated. No differences in total volatile basic nitrogen (TVB-N), pH, carbohydrate or protein content of mucus were observed between the slaughter methods. Ice-slaughtered fish had lower bacteria counts at the beginning of storage, but higher counts than fish slaughtered by electricity at the end of storage (p < 0.05). However, no significant differences in the shelf life were observed between the slaughter methods evaluated (limit of acceptability – counts > 3 × 10⁶ CFU g⁻¹ – attained after 13–16 days). Results indicated that the chemical parameters evaluated have a limited applicability to assess the shelf life of grass carp stored in ice, since pH limit (6.8) was exceeded after 4 days, while TVB-N limit (30 mg%) was not attained after 20 days of storage.     

Performance index for quality response of dynamical systems

The use of performance indices to measure the quality response of dynamical systems is studied in this paper. A definition of a general performance index is proposed which is easy to compute, easy to interpret, and flexible enough to account for different cases commonly presented in practice. The index is tested over several dynamical responses obtained from different systems obtaining good results, in the sense that it is able to rank the behaviors from best to worse, compared with a pattern response.     

Permeation of naproxen from saturated solutions and commercial formulations through synthetic membranes

The release of naproxen through synthetic membranes, mounted in modified Franz-type diffusion cells, was evaluated, either from saturated solutions or from commercially available topical formulations containing 10% naproxen. The results obtained showed that the porous type synthetic membranes chosen (cellulose acetate and polyethersulphone) can be used for assessing product performance in quality control procedures. The formulations interacted with the solid membranes (silicone and EVA) to change their diffusional characteristics. However, transfer in the membrane, and not the formulation was rate controlling. These membranes could not therefore be used in assessing product release performance for quality control.