A conjugate gradient-based algorithm to minimize the sidelobe levelof planar arrays with element failures

Element failures increase the sidelobe power level of an array. Reconfiguring the amplitude and phase distribution of the remaining elements can partially compensate for the failed elements and thus reduce the sidelobe level. An algorithm is obtained that yields the reconfigured distribution by minimizing the ratio of the average peak sidelobe power level to the power in the main beam, taking into account the defective elements. The minimization of this nonlinear function is carried out via a conjugate gradient method. The algorithm is applied to the synthesis of sum and difference patterns of planar arrays     

Reliability aspects of microsensors and micromechatronic actuators for automotive applications

In modern cars microsensors and micromechatronic actuators play an essential and still increasingly important role as the interface between the vehicle with its complex functions of motor management, chassis systems, safety as well as comfort and convenience on the one hand and the respective electronic control units on the other hand. They have to fulfill their task in a harsh environment over the entire lifetime of an automobile. Therefore reliability aspects have moved more and more into the focus of engineering and research activities in microsystem technology. A methodical procedure is described that allows reliability issues to be approached efficiently. The implementation of the methodology is illustrated with real-life examples of reliability aspects of hot film mass air flow sensors, inertial sensors as well as piezoelectric actuators.     

A new ‘tailor-made’ methodology for the mechanical behaviour analysis of rubber-like materials: I. Kinematics measurements using a digital speckle extensometry

This paper is the first part of a work devoted to the setting-up of a methodology for the mechanical behaviour characterization of rubber-like materials, using a digital speckle extensometer. We present here the experimental approach, specific to large strain measurements. The proposed method is based on in-plane kinematics measurements using an optical extensometer. The whole two-dimensional field of in-plane displacements is obtained by a digital image processing. We discuss then the correlation calculations and how to achieve the optimal subset matching. Next, we specify how to derive the principal stretch ratios, and the accuracy on these components, issued from a subsequent numerical calibration.Finally, we present experimental data dealing with a carbon black, filled natural rubber, issued from uniaxial traction tests, pure shear tests, and tensile tests performed on double-edge notched tensile specimens.     

缺陷问题驱动浸没光刻技术发展

涂层的应用导致晶圆上缺陷的增加或者使光刻表现发生变化虽然现在推测浸没光刻技术的量产时间还太早,但是许多公司正在努力确定生产线何时能从干法工艺跃为湿法工艺。根据最近在San Jose举办的     

High accuracy path tracking for vehicles in presence of sliding: Application to farm vehicle automatic guidance for agricultural tasks

When designing an accurate automated guidance system for vehicles, a major problem is sliding and pseudo-sliding effects. This is especially the case in agricultural applications, where five-centimetre accuracy with respect to the desired trajectory is required, although the vehicles are moving on slippery ground. It has been established that RTK GPS was a very suitable sensor to achieve automated guidance with such high precision: several control laws have been designed for vehicles equipped with this sensor, and provide the expected guidance accuracy as long as the vehicles do not slide. In previous work, further control developments have been proposed to take sliding into account: guidance accuracy in slippery environments has been shown to be preserved, except transiently at the beginning/end of curves. In this paper, the design of this control law is first recalled and discussed. A Model Predictive Control method is then applied in order to preserve accuracy of guidance even during these curvature transitions. Finally, the overall control scheme is implemented, and improvements with respect to previous guidance laws are demonstrated through full-scale experiments.     

A physically based approach to granular media mechanics: grain-scale experiments,initial results and implications to numerical modeling

It is generally appreciated that the mechanical behavior of granular media depends fundamentally on the interaction of the constituent particles, and that the validity of numerical models of granular media would be greatly improved with knowledge of the grain-scale mechanics. However, most supporting experimental work has been conducted on highly idealized materials, and a limited amount of information exists on grain-scale force–displacement relationships for naturally occurring materials. To address this shortcoming, we are conducting a program that integrates laboratory experiments on grains of naturally occurring aggregate with the discrete element modeling method, with the goal of relating the grain-scale physical and mechanical properties of granular media to bulk behavior. The paper describes the equipment and methods that have been developed to conduct close-loop controlled, grain-scale experiments under monotonic and cyclic loading conditions, and presents results from an initial set of experiments on unbonded grains. The implications of the grain-scale results to the discrete element model are discussed. Discussions center on the applicability of a physically based approach to the mechanics of granular media in general. In light of future exploration missions and the resulting need to predict the mechanical properties of lunar and planetary regoliths, the paper examines the potential usefulness of our physically based approach to the problem of predicting the behavior of the types of materials found in those environments.     

成品率的预测准确度有多高

成品率预测是可制造性设计（DFM）的基础之，但它还远不止于此。IBM系统和技术群300mm半导体运营副总裁DanArmbrust说：“我们精确预测成品率的能力就是我们的经济模式。”Armbrust是SEMICON West 2007成品率论坛讨论DFM现状的三位参与者之一。与他共同参加讨论的是Synopsys公司DFM解决方案副总裁Anantha Sethuraman和Photronics公司的CTO Chris Progler。     

Laboratory simulated slipstream testing of novel sulfur removal processes for gasification application

The Wabash River Integrated Methanol and Power Production from Clean Coal Technologies (IMPPCCT) project is investigating an Early Entrance Coproduction Plant (EECP) concept to evaluate integrated electrical power generation and methanol production from coal and other carbonaceous feedstocks. Research, development and testing (RD&T) that is currently being conducted under the project is evaluating cost effective process systems for removing contaminants, particularly sulfur species, from the generated gas which contains mainly synthesis gas (syngas), CO₂ and steam at concentrations acceptable for the methanol synthesis catalyst. The RD&T includes laboratory testing followed by bench-scale and field testing at the SG Solutions Gasification Plant located in West Terre Haute, Indiana. Actual synthesis gas produced by the plant was utilized at system pressure and temperature for bench-scale field testing.