FDM analysis for MHD flow of a non-Newtonian fluid for blood flow in stenosed arteries

A computational model is developed to analyze the effects of magnetic field in a pulsatile flow of blood through narrow arteries with mild stenosis, treating blood as Casson fluid model. Finite difference method is employed to solve the simplified nonlinear partial differential equation and an explicit finite difference scheme is obtained for velocity and subsequently the finite difference formula for the flow rate, skin friction and longitudinal impedance are also derived. The effects of various parameters associated with this flow problem such as stenosis height, yield stress, magnetic field and amplitude of the pressure gradient on the physiologically important flow quantities namely velocity distribution, flow rate, skin friction and longitudinal impedance to flow are analyzed by plotting the graphs for the variation of these flow quantities for different values of the aforesaid parameters. It is found that the velocity and flow rate decrease with the increase of the Hartmann number and the reverse behavior is noticed for the wall shear stress and longitudinal impedance of the flow. It is noted that flow rate increases and skin friction decreases with the increase of the pressure gradient. It is also observed that the skin friction and longitudinal impedance increase with the increase of the amplitude parameter of the artery radius. It is also found that the skin friction and longitudinal impedance increases with the increase of the stenosis depth. It is recorded that the estimates of the increase in the skin friction and longitudinal impedance to flow increase considerably with the increase of the Hartmann number.     

功能梯度类金刚石薄膜的脉冲激光制备

长期以来 ,高质量的纯类金刚石薄膜的成功制备一直受其巨大内部压应力的阻碍 ,因为这种压应力导致严重的附着问题。厚度大于 50 0nm的类金刚石薄膜中的压应力常使薄膜与基体剥离。作者采用功能梯度的设计概念 ,应用准分子脉冲激光沉积方法 ,成功制备了厚度超过 1 0 μm的高质量类金刚石薄膜。薄膜中的SP3碳原子含量超过 6 0 %。纳米硬度测试表明 ,薄膜的弹性模量高达 50 0GPa ,纳米硬度高达 6 0GPa ,薄膜与基体间附着良好。证明功能梯度的设计概念可以用于制备较厚的超硬类金刚石薄膜。     

Generation of vertex connected subgraphs for multi-input multi-output reliability networks

In this paper, the problem of evaluation of reliability (probability of success) of a network consisting of several inputs and outputs is studied. Edges are assumed to be perfect and vertices are assigned the probabilities of success. A new concept called “vertex connected subgraph” is introduced for this purpose. This concept is useful even for dense graphs because they are of the order of 2^(v-k-1) which is independent of e, where ν(e) is the number of vertices (edges) and k is the number of outputs of a graph.     

A STOCHASTIC CHARACTERIZATION OF THE MACHINE TOOL WORKPIECE SYSTEM IN BTA DEEP HOLE MACHINING Part II: Response Analysis and Evaluation of the Tool Tip Motion

In this paper, the solutions to the stochastic differential equations, which mathematically represent the machine tool work-piece system in BTA deep hole machining are presented. The solutions to the parametric stochastic differential equations have been obtained using the well known averaging technique. The non-parametric inhomogeneous equations have been solved using the Fokker-Planck equation. Based on these solutions, the true motion of the tool tip has been described using the maximum, average and minimum deviation curves. These curves predict that helical grooves will be formed on the workpiece and such helical grooves were observed on the workpieces. Also, the maximum, average and minimum values of deviation of the tool tip which is a measure of the roundness error are established. Based on these results an upper bound for the roundness error as a function of depth of hole is derived. The measurement of roundness of the specimens reveals that the experimental values be in the zone predicted by the theory in a finite region. So it can be speculated that the resultant force system is not completely balanced at the pads.     

Selection of optimal set of weights in a layered network using genetic algorithms

Genetic algorithms represent a class of highly parallel robust adaptive search processes for solving a wide range of optimization and machine learning problems. The present work is an attempt to demonstrate their effectiveness to search a global optimal solution to select a decision boundary for a pattern recognition problem using a multilayer perceptron. The proposed method incorporates a new concept of nonlinear selection for creating mating pools and a weighted error as a fitness function. Since there is no need for the backpropagation technique, the algorithm is computationally efficient and avoids all the drawbacks of the backpropagation algorithm. Moreover, it does not depend on the sequence of the training data. The performance of the method along with the convergence has been experimentally demonstrated for both linearly separable and nonseparable pattern classes.     

Identification of factors that lead to perceived learning improvements for female students

Past research has shown that females have more negative attitudes toward engineering and technology than do males. These negative attitudes may explain the decreasing number of females choosing technical careers. Past studies have shown that a change in learning environments and the methods by which learning takes place might foster a change in this situation. A multimedia case study incorporating a real-world engineering and technical problem faced by a power plant was developed in order to provide a new learning environment for engineering and business students. This research investigates whether the use of this material by female and male students led to differences in perceived higher level cognitive skills and, if so, seeks to identify the factors that cause the difference. The results suggest that when designing new learning environments, it is important for the female students to be challenged and have opportunities both to learn by themselves and to learn from others. These results have implications for teaching programs, such as the provision of opportunities for group learning, especially for female students.     

Comments on `Enumeration of all minimal cutsets for a node pair ina graph'

The commenters point out that the algorithm of S.A. Kumar and S.H. Lee for the enumeration of all minimal s-t cutsets is defective (see ibid., vol.R-26, p.51-5, April 1979). It is illustrated through an example that their algorithm misses several minimal cutsets. The commenters cite two reasons for this: the adjacency problem and the back-vertex problem     

Tensile creep study of copper with alumina dispersions prepared by high rate physical vapour deposition

Mott has suggested that the ideal creep-resistant material will be one with a fine grain size in which the grain boundaries are filled with some substance, say a refractory oxide, to inhibit the motion of grain boundaries. Such a system, alumina-dispersed copper, was prepared by high rate physical vapour deposition. The process parameters and their effect on structure and texture have been studied. The room temperature mechanical properties have also been reported. This paper deals with a high temperature mechanical property, i.e. tensile creep. Tests were made on a constant-stress vacuum creep rig with a Ferrometic feedthrough to ensure a zero leakage rotary seal. A vacuum of 1.33 X 10^?3 Pa was maintained. The test temperatures were 500°C (0.57T_m) and 700°C (0.72T_m). The stresses applied were 2.07, 3.45, 4.14 and 6.89 X 10⁷ Nm^?2. Tests were made on as-deposited films and on cold-rolled condensates.Minimum creep rate curves showed the effect of the alumina content in raising the creep resistance of copper. Cold rolling also reduced the minimum creep rate markedly. Varying the temperature and stress affected the shape of these curves. Stress-rupture plots were used to summarize the data.Grain refinement together with a fine stable dispersion seem to give improved creep strength. The critical barrier of the Orowan stress was noted. The stress exponent for a low alumina deposit (0.21 vol.%) was about 8, and the apparent activation energy for creep was about 202 kJ mol^?1 (0.13 vol.%). There was an inverse relationship between the rupture life and the minimum creep rate, their product being constant (about 0.2).     

Electronic absorption spectrum of Cu2 ions doped in lithium ammonium sulphate crystal

Single crystals of Lithium Ammonium Sulphate doped with Cu²⁺ ions were grown by slow evaporation technique. Electronic absorption spectra have been recorded at room and liquid nitrogen temperatures on Cary-2390 spectrophotometer. The spectrum is characteristic of a Cu²⁺ ion in octahedral symmetry. From the magnitude and and relative position of the bands a successful interpretation of all the observed bands has been made. The crystal field and tetragonal field parameters are derived. The observed and calculated energies are in good agreement.     

Growth and Characterization of C60 Crystals from Pure C60 and Fullerite

Good quality C₆₀ crystals have been grown from high purity C₆₀ powder and fullerene mixture (C₆₀/C₇₀) by vacuum sublimation method. The grown crystals were characterized with Optical microscopy, SEM, powder XRD, High Performance Liquid Chromatography and Raman spectroscopic analyses.