Optimization of a Fabric Softener Formulation with an Electrochemical Sensor and Streaming Potential Measurements

An electrochemical, cationic, surfactant-selective sensor based on multiwalled carbon nanotubes (MWCNT) functionalized with a sulfate group and the cetylpyridinium ion (MWCNT–OSO₃⁻CP⁺) as a sensing material was used for optimization of the formulation of a fabric softener. Potentiometric titrations were performed and response measurements were obtained using four cationic surfactants (CS) of technical grade and four CS of analytical grade. The slope closest to Nernstian was obtained for di-(tallow carboxyethyl) hydroxyethyl methylammonium methosulfate (MAS) (59.5 ± 1.1 mV/decade of activity in water and 57.5 ± 1.3 mV/decade of activity in CaCl₂). When using CS as analytes in potentiometric titrations, the best accuracy (99.8%) was obtained when using MAS; therefore, it was chosen as the CS for the fabric softener formulation. Due to the better properties of fabric softeners with silicone in their formulations, four silicones at several concentration levels were used as potential additives. Based on the stability and viscosity of the system, the diquaternary polydimethylsiloxane (DPS) (w = 0.19%) was chosen for the fabric softener formulation. The pH did not significantly influence the potential when in the range of 3–8 or the recovery of potentiometric titrations when in the range of 3–7. The application profile of the CS was assessed through streaming potential measurements of reference fabrics in an electrokinetic analyzer. The obtained electrokinetic parameters indicated on lag in adsorption of model fabric softener (MFS) based on MAS (w = 9%), with the addition of silicone DPS (MFS 3), on cotton and polyester fabrics, but advantage in stability when compared with other MFS investigated.     

The addition to the ergodic theorem on probability MV-algebras with product

 This article deals with the prototype of the strong law of large numbers, with individual ergodic theorem on probability MV-algebras with product. Dedicated to Prof. Ján Jakubík on the occasion of his 80th birthday This research is supported by Grant 1/9056/02 1991 Mathematics Subject Classification: 28E10     

Context-Independent Multilingual Emotion Recognition from Speech Signals

This paper presents and discusses an analysis of multilingual emotion recognition from speech with database-specific emotional features. Recognition was performed on English, Slovenian, Spanish, and French InterFace emotional speech databases. The InterFace databases included several neutral speaking styles and six emotions: disgust, surprise, joy, fear, anger and sadness. Speech features for emotion recognition were determined in two steps. In the first step, low-level features were defined and in the second high-level features were calculated from low-level features. Low-level features are composed from pitch, derivative of pitch, energy, derivative of energy, and duration of speech segments. High-level features are statistical presentations of low-level features. Database-specific emotional features were selected from high-level features that contain the most information about emotions in speech. Speaker-dependent and monolingual emotion recognisers were defined, as well as multilingual recognisers. Emotion recognition was performed using artificial neural networks. The achieved recognition accuracy was highest for speaker-dependent emotion recognition, smaller for monolingual emotion recognition and smallest for multilingual recognition. The database-specific emotional features are most convenient for use in multilingual emotion recognition. Among speaker-dependent, monolingual, and multilingual emotion recognition, the difference between emotion recognition with all high-level features and emotion recognition with database-specific emotional features is smallest for multilingual emotion recognition—3.84%.     

Magnetron sputtered Au-Pd-In alloys: microgravimetric and electrochemical characterisation in simulated physiological solutions

An electrochemical quartz crystal microbalance (EQCM) has been applied in corrosion sensing of magnetron sputtered Au-Pd-In alloy in simulated physiological solutions. The piezoelectric resonators were prepared by alloy deposition on quartz substrates by a DC magnetron-sputtering (MS) technique. X-ray photoelectron spectroscopy (XPS) analysis showed that the deposit composition was similar to that of the MS target, which was a commercially available casting alloy. X-ray diffraction indicated that the sputtered alloy has a crystalline structure. Measurements by using impedance spectroscopy and DC voltammetry showed some differences in electrochemical behaviour of both sputtered and cast alloy; however, these data did not indicate superior corrosion resistance of the sputtered specimen. Alloy corrosion has been studied by EQCM in three simulated physiological solutions: 0.9 N NaCl, 0.1 N NaCl+0.1 N lactic acid and artificial saliva. The EQCM indicated corrosion as increase in electrode mass, which was due to accumulation of corrosion products on the surface. The mass gain curves were similar in both neutral (pH 6) and acidic (pH 2.2) solutions, what implies dissolution of corrosion products in both media to be insignificant. XPS analysis showed that In₂O₃ was the main corrosion product on the surface. Corrosion current calculations from the mass curves were undertaken, which yielded the same corrosion rate assuming different oxides on the surface. The average corrosion rates in oxygenated 0.9 N NaCl and 0.1 N NaCl+0.1 N lactic acid solutions were similar and about twice as high as that in saliva.     

Decarburization of Fe-Cr-C steels during high-temperature oxidation

Isothermal oxidation treatments were carried out on Fe-Cr-C steels. The steels containing 0.08, 0.15, 0.17, 0.88, 1.51, and 12.77wt.% Cr and 0.10, 0.49, 1.19, 0.18, 1.05, and 1.63 wt.% C were oxidized in ambient air at temperatures of 900, 1000, and 1200°C. Steels containing 13.22, 12.90, 12.52, and 12.77wt.% Cr and 0.15, 0.30, 0.50, and 1.63 wt.% C were heated (1100°C/3hr) in a flowing atmosphere of O₂-N₂-He in a SETARAM thermobalance. Evidence of decarburization of the steels is given by metallographic observations, by direct measurements of carbon diffusivities from the decarburization profiles in the oxidized samples, and by the results of kinetics measurements.³ Carbon diffusion coefficients were measured by the standard sectioning method in the samples oxidized in air. A. generalized equation for carbon diffusivity in Fe-Cr-C alloys is developed in terms of N_Cr[wt.%], N_C[wt.%], and T[K].     

The synthesis of bi- and trichromophoric dyes bearing an s-triazinyl ring spacer

An alternative procedure has been described for the syntheses of several bi- and trichromophoric compounds consisting of 1-aminopyrene and 3-aminobenzanthrone chromophoric subsystems connected by an s-triazinyl ring spacer. The synthetic method used, which utilises an autoclave under autogenous pressure, is suitable for the nucleophilic substitution of both chlorine atoms within the triazinyl ring by weakly basic aromatic amines. The structures of the synthesized compounds were confirmed using elemental analysis, ¹H NMR, and mass spectra. UV/vis absorption and fluorescence spectra and fluorescence quantum yields were measured. The dependence of fluorescence intensity and fluorescence quantum yields on solvent polarity was investigated.     

Representativity of the singular stress state in the failure of adhesively bonded joints between metals and composites

Several critical points, where both geometry and material properties change abruptly, arise in an adhesively bonded lap joint between a metallic and a composite material. These critical points, called multimaterial corners or cross-points, at which the linear theory of elasticity predicts unbounded (singular) stresses, are potential points for failure initiation. In this work, a complete stress characterization at these multimaterial corners has been carried out to analyze, after a preliminary experimental test program, the suitability of the application of the parameters defining the singular stress state in the characterization of the failure of these joints. The comparative analysis of the numerical and experimental results obtained show that the singular stress state controlled by a series of the generalized stress intensity factors is controlling the failure path at these corners.     

Anomalous dilatation-temperature curves of PZT-ZrO2 composites

The dilatation-temperature curves of the PZT-ZrO₂ composites, containing 1.3–13.2 vol% ZrO₂ were studied. The course of martensitic transformation (MT) of dispersed ZrO₂ particles in the PZT matrix was followed. Upon cooling, a spontaneous microcrack formation occurred during the MT from tetragonal to monoclinic crystal phase of ZrO₂. The phenomenon of intensive shrinkage above 800 °C upon heating is explained as a process of microcrack healing in the presence of the PbO-rich liquid phase.     

The influence of cavitation damage upon high temperature creep under stationary and non-stationary loading conditions: Part IV: Cyclic creep at constant load amplitude and constant true stress amplitude

The aim of the present paper is to investigate the influence of high temperature cavitation upon the creep behavior of ideally plastic materials subjected to tensile load cycling. In the present treatment the oscillating tensile stress is replaced by a static equivalent stress which is a function of the loading conditions. Creep equations are derived for cavitating and non-cavitating specimens respectively. The volume change for constant load amplitude cycling is calculated. The main results derived for different loading procedures are also compared.