Direct laser writing techniques are suitable for the high precision-patterning of 2D and 3D micro/nanostructures, featuring a variety of geometries and materials. Here, we demonstrated the use of laser-induced forward transfer with fs-pulses (fs-LIFT) to selectively transfer graphene oxide and poly(p-phenylene vinylene) patterns onto polymeric microstructures, fabricated by two-photon polymerization. The influence of different fs-LIFT experimental parameters on the width and height of the printed patterns was investigated. Upon optimum fs-LIFT parameters, we achieved homogeneous printed areas of both materials onto specific regions of the microstructures. Raman spectroscopy confirmed that fs-LIFT does not change the donor material upon transfer. Overall, this work demonstrates a promising strategy with precise printing capabilities, thus opening new opportunities for the development of photonic and optoelectronic devices.
Novel composite membranes were prepared using imidazolium type aprotic ionic liquids and sulfonated poly (ether ketone) (SPEK) as polymer matrix by solution casting process. All the prepared membranes were characterized for their thermal stability, mechanical properties, ion exchange capacity, proton conductivity and leaching out of ionic liquids in presence of water. Ionic liquid based membranes were more flexible than neat SPEK membrane due to the plasticization effect of ionic liquids. The interactions and compatibility occurring among components were investigated by vibration spectroscopy (FTIR ATR) and scanning electron microscopy respectively. The thermal stability of composite membranes was higher than unmodified membranes. The ion conductivity of composite membranes under anhydrous conditions was found to be dependent on temperature, type and concentration of ionic liquid in SPEK matrix. Ion conductivities of composite membranes under anhydrous condition were found to be up to two orders (∼100 times) higher than neat SPEK membrane and it was found to be ∼5 mS/cm at 140 °C for SPEK/OTf-70. These composite membranes can be successfully operated at temperatures ranging from 40 °C to 140 °C under anhydrous conditions. 相似文献
A Geographical Information System (GIS) integration tool is proposed to demarcate the groundwater potential zone in a soft rock area using seven hydrogeologic themes: lithology, geomorphology, soil, net recharge, drainage density, slope and surface water bodies. Except for net recharge and slope, the other five themes are derived from remote sensing data. IRS-1B LISS-II data was used for a 631 km2 area in Midnapur District, West Bengal, India. While slope was calculated using topographic sheets, net recharge was obtained from annual water table fluctuation data. Each feature of all the thematic maps was evaluated according to its relative importance in the prediction of groundwater potential. The evolved GIS-based model of the study area was found to be in strong agreement with available borehole and pumping test data. 相似文献
The lithium extraction from a lepidolite concentrate using roasting, followed by water leaching, was studied. Several alternative additives were initially tested. The use of sodium and calcium sulfates as additives was evaluated in more detail. The influence of some process variables, namely the roasting time, roasting temperature and the additive/concentrate mass ratio, was studied applying a design of experiments. The lithium extraction was modelled and the fitted and validated model was used to optimize the process response. The increase in the additive/concentrate mass ratio, roasting time and temperature seems to result in solid state reactions and transformations that lead to phase, morphological and particle size distribution modifications, which were assessed by XRPD, SEM, and particle size analyses. In this process, lithium sodium sulfate formation constitutes a crucial step enabling the Li water leaching. High lithium extractions were estimated for several combinations of factors. At 850°C, lithium extractions over 90% are obtained when the roasting time is above 1.90 hour and the additive/concentrate mass ratios are over 0.77. An increase in the temperature to 875°C also leads to lithium extractions over 90% for a roasting time of 1 hour and an additive/concentrate mass ratio of 0.60. 相似文献
A novel polymer cream was applied to brick and mortar in an attempt to reduce water absorption and to improve thermal insulation for household heating energy saving. Tests were carried out on surface energy, water contact angle, thermal conductivity and sorptivity of brick and mortar with and without cream treatment. A model house was built and a heating and monitoring system was developed to quantitatively evaluate the heating energy consumption in different conditions before and after cream treatment. It was found out that cream treatment can successfully impart good water repellence and enhanced the thermal insulation of the brick and mortar. The results from contact angle and surface energy measurements showed that the materials became highly hydrophobic. Experimental results from the model house showed approximately 9% heating energy consumption reduction in dry conditions and approximately 50% in wet conditions. In addition, the internal humidity typically was reduced to almost 1/3 of that of the control. It has been demonstrated that the novel cream treatment on masonry buildings can help reduce damp problems and save household heating energy consumption which can make a significant contribution to addressing social, environmental, ecological and economic problems resulting from climate change and global warming. 相似文献
The non-isothermal crystallization kinetics of pure PP and PP/SEBS-g-MA blends up to volume fraction, Φd (0–0.50) was studied by differential scanning calorimetry at four different cooling rates. Crystallization parameters were analyzed by Ozawa and Liu models. The Ozawa model fits in the PP/SEBS-g-MA blends and indicates the effect of SEBS-g-MA copolymer on the crystallization process of polypropylene. Augis–Bennet model has been used to calculate activation energy, ?E, during non-isothermal crystallization process. The value of ?E decreased with SEBS-g-MA due to flexibility of SEBS-g-MA by which movements of chains of PP become easier. 相似文献
Dense silicon carbide (SiC) ceramics were prepared with 0, 10, 30 or 50 wt% WC particles by hot pressing powder mixtures of SiC, WC and oxide additives at 1800 °C for 1 h under a pressure of 40 MPa in an Ar atmosphere. Effects of alumina or SiC erodent particles and the WC content on the erosion performance of sintered SiC–WC composites were assessed. Microstructures of the sintered composites consisted of WC particles distributed in the equi-axed grain structure of SiC. Fracture surfaces showed a mixed mode of fracture, with a large extent of transgranular fracture observed in SiC ceramics prepared with 30 wt% WC. Crack bridging by WC enhanced toughening of the SiC ceramics. A maximum fracture toughness of 6.7 MPa*m1/2 was observed for the SiC ceramics with 50 wt% WC, whereas a high hardness of 26 GPa was obtained for the SiC ceramics with 30 wt% WC. When eroded at normal incidence, two orders of magnitude less erosion occurred when SiC–WC composites were eroded by alumina particles than that eroded by SiC particles. The erosion rate of the composites increased with increasing angle of SiC particle impingement from 30° to 90°, and decreased with WC reinforcement up to 30 wt%. A minimum erosion wear rate of 6.6 mm3/kg was obtained for SiC–30 wt% WC composites. Effects of mechanical properties and microstructure on erosion of the sintered SiC–WC composites are discussed, and the dominant wear mechanisms are also elucidated. 相似文献
We report results on audio copy detection for TRECVID 2009 copy detection task. This task involves searching for transformed audio queries in over 385?h of test audio. The queries were transformed in seven different ways, three of them involved mixing unrelated speech to the original query, making it a much more difficult task. We give results with two different audio fingerprints and show that mapping each test frame to the nearest query frame (nearest-neighbor fingerprint) results in robust audio copy detection. The most difficult task in TRECVID 2009 was to detect audio copies using predetermined thresholds computed from 2008 data. We show that the nearest-neighbor fingerprints were robust to even this task and gave actual minimal normalized detection cost rate (NDCR) of around 0.06 for all the transformations. These results are close to those obtained by using the optimal threshold for each transform. This result shows the robustness of the nearest-neighbor fingerprints. These nearest-neighbor fingerprints can be efficiently computed on a graphics processing unit, leading to a very fast search. 相似文献
Many polycyclic aromatic hydrocarbons (PAHs) can cause DNA adducts and initiate carcinogenesis. Mixed exposures to coal dust
(CD) and PAHs are common in occupational settings. In the CD and PAH-exposed lung, CD increases apoptosis and causes alveolar
type II (AT-II) cell hyperplasia but reduces CYP1A1 induction. Inflammation, but not apoptosis, appears etiologically associated
with reduced CYP1A1 induction in this mixed exposure model. Many AT-II cells in the CD-exposed lungs have no detectable CYP1A1
induction after PAH exposure. Although AT-II cells are a small subfraction of lung cells, they are believed to be a potential
progenitor cell for some lung cancers. Because CYP1A1 is induced via ligand-mediated nuclear translocation of the aryl hydrocarbon
receptor (AhR), we investigated the effect of CD on PAH-induced nuclear translocation of AhR in AT-II cells isolated from
in vivo-exposed rats. Rats received CD or vehicle (saline) by intratracheal (IT) instillation. Three days before sacrifice, half
of the rats in each group started daily intraperitoneal injections of the PAH, β-naphthoflavone (BNF). 相似文献