c-BN color change with bonded water added into the h-BN–Mg system

Cubic boron nitride (c-BN) crystals were synthesized in conditions of high temperature and high pressure (HTHP) when different kinds of bonded water were respectively added into the system of h-BN–Mg. All bonded water used in this work could reduce the temperature of growing c-BN compared to that in the system of h-BN–Mg. The c-BN color could change from black to yellow when certain amounts of bonded water, such as NiSO₄·6H₂O and CuSO₄·5H₂O, Mg(OH)_2, were added. However, c-BN color remained black no matter how much bonded water, such as NiCl₂·6H₂O, CuCl₂·2H₂O, and SnCl₂·2H₂O, was added. The bonded water can be classified into Chlorine-containing bonded water (Cl-BW) and Chlorine-free bonded water (ClF-BW) according to their different characters and effects on the synthesized c-BN color.     

Hydrothermal Synthesis of Magnesium Aluminate Platelets

Magnesium aluminate (MgAl₂O₄) platelets were first synthesized by hydrothermal treatment of γ-AlO(OH) in a magnesium nitrate aqueous solution at 400°C. The platelets are 100–200 nm in width and 25 nm in thickness. The influence of temperature, the anions of the magnesium salt, the amount of magnesium salt, and precursor pH on the formation of such structure was investigated. The experimental results indicated that the anions of the magnesium salt and precursor pH could have a significant influence on the growth of MgAl₂O₄. MgAl₂O₄ formation followed the in situ transformation mechanism, which was the reason why the MgAl₂O₄ crystallites had a platelet morphology.     

Studies on the treatment of brilliant green solution by combination microwave induced oxidation with CoFe2O4

In this work the synergistic effects of microwave (MW) irradiation induced oxidation processes and CoFe₂O₄ were studied for the degradation of brilliant green (BG) from aqueous solutions. Under the optimum condition, the ratio of solid to liquid was 1:167 (0.3 g CoFe₂O₄ mixed with 50 mL of 20 mg L⁻¹ BG solution), MW power 600 W, and the time of the irradiation 2 min. And the decolorization rate could reach up to 100%. Further investigation showed that BG was degraded by MW-induced oxidation combined with CoFe₂O₄ surface adsorption. The CoFe₂O₄ could increase the efficiencies of MW degradation and be used repeatedly. The experimental results indicated that the method of MW degradation BG in the presence of CoFe₂O₄ could reduce reaction time and increase product yield.     

柴油抗蜡分散剂的工业应用

柴油抗蜡分散剂PDN -3 0 2 3应用试验表明 ,抗蜡分散剂能有效改变蜡结晶的形状及尺寸 ,抑制蜡结晶的生长 ,有助于蜡晶体在柴油中分布得更均匀。     

Synthesis and properties of PDMS modified waterborne polyurethane–acrylic hybrid emulsion by solvent-free method

A new type of polysiloxane modified polyurethane–acrylic hybrid emulsion was synthesized by solvent-free method and the polysiloxane was introduced into the soft segment of polyurethane chains using dihydroxybutyl-terminated polydimethylsiloxane (PDMS). The formed film from the hybrid emulsion could provide obviously higher water-resistance property. The preparation technologies such as the content of carboxy group and acrylic monomer, the rate and the time of emulsification were discussed systematically. The chain structure and the particle size were confirmed by the analysis of Fourier transform infrared spectroscopy and transmission electron microscopy, respectively. The effect of PDMS content on the water resistance and the mechanical property were investigated by absorbed water ratio, water contact angle and dynamic mechanical measurement.     

Particle distribution and interfacial reactions of Al–7%Si–10%B<Subscript>4</Subscript>C die casting composite

Aluminum–boron carbide particle reinforced composite is an advanced material which can be used in applications such as neutron-shielding components, aircraft, and aerospace structures. In the microstructural characterization of an Al–7%Si–10%B₄C die casting, attention is particularly focused on particle distribution and interface reaction products between B₄C particles and the aluminum matrix. The quantitative analysis results show that, in a cross-section of the cast part, more particles concentrate in the center and fewer particles are present in the wall regions. Moreover, some particle segregation bands have been observed. The mechanisms of the particle migration are proposed to describe the phenomenon. However, the average particle fraction in any cross-section of the cast part is almost the same. A barrier layer consisting of several sublayers was detected on the surface of B₄C particles. Using electron diffraction in selected areas, it is found that these sublayers are composed of Al₃BC crystals, TiB₂ crystals, Si crystals, and coarse stick-shaped TiB₂ particles. In addition, it is observed that Si plays an important role in the formation of a dense barrier layer. The barrier layer can limit B₄C decomposition and improve B₄C stability in the aluminum melt.