Electrostatic actuation as a self-testing method for silicon pressure sensors

The aim of this work is to investigate the possibility of using electrostatic forces to actuate the membrane of a pressure sensor in order to create self-testing features in the system. It is shown that the electrostatic pressure is small compared with the external pressure, unless large voltages or electrical charges are used. The interrelation between electrostatic forces and externally applied pressure is calculated for different electrical drive modes of the capacitor, in the case of a uniform membrane and for a MESA-type membrane.     

Microstructure and flow behaviour during backward extrusion of semi-solid 7075 aluminium alloy

The microstructure and flow behaviour during thixo backward extrusion of 7075 aluminium alloy were investigated. Reheating the steel die and the aluminium billet placed into the die at the same time using an induction furnace provides rapidly a very homogeneous microstructure suitable for thixoforming. During thixoextrusion, despite the high solid fraction, the solid globules are weakly connected and slide over each other without any plastic deformation. The flow remains quasi homogeneous resulting in homogeneous induced microstructure of the component.     

In Vivo Skin Permeation of Sodium Naproxen Formulated in Pluronic F-127 Gels: Effect of Azone® and Transcutol®

The objective of this study was to determine the penetration of sodium naproxen, formulated in Pluronic F-127 (PF-127) gels containing Azone® and Transcutol® as penetration enhancers, through human skin in vivo. It was found that the combination of Azone® and Transcutol® in PF-127 gels enhanced sodium naproxen penetration, with enhancement ratios of up to two fold compared with the formulation containing only Transcutol®. These results were confirmed by TEWL and ATR-FTIR spectroscopy, suggesting a synergic action for Azone® and Transcutol®. Because of the thermo-reversible behavior of Pluronic gels, the influence of the components added to the gel formulations on viscosity, as a function of temperature, was also studied.     

Energy performance of an exhibition hall in a life cycle perspective: embodied energy,operational energy and retrofit strategies

Nowadays, the focus on the building energy consumption in the use phase prevails over an interest concerning the energy impacts linked to all the other phases of the construction process. However, reducing operational energy could lead to shifting the impacts from one stage to another. Thus, combining the study of strategies improving energy efficiency in the use phase with a life cycle approach is crucial. Exhibition halls are peculiar buildings from the geometry, construction and use points of view, rarely addressed in energy and life cycle energy analysis studies. Therefore, in this paper, a representative hall of the Milan Trade Fair is taken as a case study. A building energy simulation model is firstly calibrated in order to derive the operational energy for climatisation. The operational energy appears artificially low due to the short use period during the year. When compared with the calculated embodied energy of the envelope and structure, it is found that 57 years would be needed to balance energy spent in the construction and in the use phase. Further, some retrofit interventions are proposed and analyzed. Insulation interventions are not attractive from the economic payback time point of view. However, when the embodied energy of the retrofit interventions is compared with the energy savings in the use phase, interesting energy payback times are obtained. Therefore, this study puts in evidence on the importance of adopting a life cycle perspective, especially for buildings with low-intensity use. Eventually, the critical issues of the life cycle energy analysis are deeply discussed.     

Detection of Channel Variations to Improve Channel Estimation Methods

In current digital communication systems, channel information is typically acquired by supervised approaches that use pilot symbols included in the transmit frames. Given that pilot symbols do not convey user data, they penalize throughput spectral efficiency, and transmit energy consumption of the system. Unsupervised channel estimation algorithms could be used to mitigate the aforementioned drawbacks although they present higher computational complexity than that offered by supervised ones. This paper proposes a simple decision method suitable for slowly varying channels to determine whether the channel has suffered a significant variation, which requires to estimate the matrix of the recently changed channel. Otherwise, a previous estimate is used to recover the transmitted symbols. The main advantage of this method is that the decision criterion is only based on information acquired during the time frame synchronization, which is carried out at the receiver. We show that the proposed criterion provides a considerable improvement of computational complexity for both supervised and unsupervised methods, without incurring in a penalization in terms of symbol error ratio. Specifically, we consider systems that make use of the popular Alamouti code. Performance evaluation is accomplished by means of simulated channels as well as making use of indoor wireless channels measured using a testbed.     

Betulinic Acid in Complex with a Gamma-Cyclodextrin Derivative Decreases Proliferation and in Vivo Tumor Development of Non-Metastatic and Metastatic B164A5 Cells

Betulinic acid, a very promising anti-melanoma agent, has very low water solubility that causes low bioavailability. To overcome this inconvenience, a highly water-soluble cyclodextrin was used (octakis-[6-deoxy-6-(2-sulfanyl ethanesulfonic acid)]-γ-cyclodextrin). The complex was physico-chemically analyzed using differential scanning calorimetry (DSC), X-ray and scanning electron microscopy (SEM) methods and then in vitro tested for its antiproliferative activity by the MTT assay and by cell cycle analysis. Finally, the complex was tested in vivo using an animal model of murine melanoma developed in C57BL/6J mice, where it caused a reduction in tumor volume and weight. The study revealed the beneficial influence of betulinic acid inclusion into the cyclodextrin in terms of antiproliferative activity and in vivo tumor development.     

Carotenoids are Effective Inhibitors of in vitro Hemolysis of Human Erythrocytes,as Determined by a Practical and Optimized Cellular Antioxidant Assay

β‐Carotene, zeaxanthin, lutein, β‐cryptoxanthin, and lycopene are liposoluble pigments widely distributed in vegetables and fruits and, after ingestion, these compounds are usually detected in human blood plasma. In this study, we evaluated their potential to inhibit hemolysis of human erythrocytes, as mediated by the toxicity of peroxyl radicals (ROO?). Thus, 2,2′‐azobis (2‐methylpropionamidine) dihydrochloride (AAPH) was used as ROO? generator and the hemolysis assay was carried out in experimental conditions optimized by response surface methodology, and successfully adapted to microplate assay. The optimized conditions were verified at 30 × 10⁶ cells/mL, 17 mM of AAPH for 3 h, at which 48 ± 5% of hemolysis was achieved in freshly isolated erythrocytes. Among the tested carotenoids, lycopene (IC₅₀ = 0.24 ± 0.05 μM) was the most efficient to prevent the hemolysis, followed by β‐carotene (0.32 ± 0.02 μM), lutein (0.38 ± 0.02 μM), and zeaxanthin (0.43 ± 0.02 μM). These carotenoids were at least 5 times more effective than quercetin, trolox, and ascorbic acid (positive controls). β‐Cryptoxanthin did not present any erythroprotective effect, but rather induced a hemolytic effect at the highest tested concentration (3 μM). These results suggest that selected carotenoids may have potential to act as important erythroprotective agents by preventing ROO?‐induced toxicity in human erythrocytes.     

Edible coatings enriched with essential oils for extending the shelf‐life of ‘Bravo de Esmolfe’ fresh‐cut apples

Edible coatings based on sodium alginate (AL) and pectin (PE) at 1% and 2%(w/v) enriched with eugenol (Eug) and citral (Cit) at minimum inhibitory concentrations (MIC) (0.10% and 0.15%) and double MIC were used to preserve the quality of fresh‐cut apples ‘Bravo de Esmolfe’. Samples were taken, through 14 day at 4 °C, for analysis of colour CIE(L*h°C*), firmness, °Brix, weight loss, antioxidant activity (TEAC), microbial growth and taste panels. With those quality characteristics, three groups were formed by the principal component and hierarchical cluster analysis, for each coating base (AL or PE). Based on, for each quality parameter measured, the mean closest value to the one at harvest for colour, higher value for firmness, °Brix and TEAC, and lower value for weight loss and microbial spoilage, the best group was selected for AL and PE. From each group, two edible coatings with the highest scores in overall acceptability were selected for fresh‐cut apples: AL2% + Eug 0.1%, AL2% + Cit 0.15% + Eug 0.1%, PE 2% + Cit 0.15% and PE 2% + Eug 0.2%.