Interactions of sperm perinuclear theca with the oocyte: implications for oocyte activation,anti-polyspermy defense,and assisted reproduction

Perinuclear theca (PT) is the cytoskeletal coat of mammalian sperm nucleus that is removed from the sperm head at fertilization. PT harbors the sperm borne, oocyte-activating factor (SOAF), a yet-to-be-characterized substance responsible for triggering the signaling cascade of oocyte activation, thought to be dependent on intra-oocyte calcium release. The present article reviews the current knowledge on the biogenesis and molecular composition of sperm PT. Possible functions of sperm PT during natural and assisted fertilization, and in the initiation of embryonic development are discussed. Furthermore, evidence is provided that SOAF is transferred from the sperm PT to oocyte cytoplasm through the internalization and rapid solubilization of the post-acrosomal PT. It is shown that during natural fertilization the sperm PT dissolves in the oocyte cytoplasm concomitantly with sperm nuclear decondensation and the initiation of pronuclear development. SOAF activity is preserved in the differentially extracted sperm heads only if the integrity of PT is maintained. After intracytoplasmic sperm injection (ICSI), activation occurs only in those oocytes in which the injected spermatozoon displays complete or partial dissolution of PT. In the latter case, the residual PT of the sub-acrosomal and/or post-acrosomal sperm region may persist on the apical surface of the sperm nucleus/male pronucleus and may cause a delay or arrest of zygotic development. We propose that the sperm PT harbors SOAF in the post-acrosomal sheath, as this is the first part of the sperm cytosol to enter the oocyte cytoplasm and its disassembly appears sufficient to initiate the early events of oocyte activation. Dissolution of the sub-acrosomal part of the PT, on the other hand, appears necessary to insure complete DNA decondensation in the internalized sperm nucleus and initiate DNA synthesis of both pronuclei. The release of the SOAF from the sperm head into oocyte cytoplasm at fertilization ultimately leads to the activation of oocyte mechanism including the completion of the meiotic cell cycle, pronuclear development and anti-polyspermy defense.     

A reduction approach to the two-campus transport problem

The two-campus transport problem (TCTP) is a dial-a-ride problem with only two destinations. The problem is motivated by a transport problem between two campuses of an academic college. The two campuses are located in two different cities. Lecturers living in one city are sometimes asked to teach at the other city’s campus. The problem is that of transporting the lecturers from one campus to the other, using a known set of vehicles, so as to minimize the time the lecturers wait for their transport. We mathematically model the general TCTP, and provide an algorithm that solves it, which is polynomial in the number of lecturers. The algorithm is based on a reduction to a shortest path problem.     

Factors facilitating or impeding older adults’ creative contributions in the collaborative design of a novel DTV-based application

This article describes some of the challenges of supporting older adults’ creative input to the design of an (as yet) undefined digital television application. Focusing on commonly used brainstorming and paper prototyping techniques, constructive insights are gathered from users with limited experience of interactive technology. Encouraging older participants to move beyond what they are familiar with, the research reports on how fragmented conceptual knowledge of familiar technologies can either facilitate or impede the creative development of new ideas. This includes bias or contradictory ideas that can emerge in the elicitation process. As reported, other factors, such as the self-perception of inadequate drawing skills, demonstrate further barriers for some older adults to articulate their visions and aspirations for suitably designed technology.     

Synthesis and characterization of high molecular weight polyaniline for organic electronic applications

High molecular weight polyaniline (PANI) was synthesized by a combined procedure incorporating various synthesis methods. Temperature and open circuit potential of the reaction mixture were collected to monitor the reaction progress. The polymer is characterized by various techniques including gel permeation chromatography, dynamic light scattering, infrared spectroscopy, solid‐state nuclear magnetic resonance, and differential scanning calorimetry for elucidating the molecular architecture obtained by this method. As‐synthesized PANI was found to possess high molecular weight, reduced branching, reduced cross‐linking, and to predominantly consist of linear polymer chains. This polymer was also found to be more stable in solution form. J–V characteristics of as‐synthesized PANI films indicate a high current density which is due to increased free pathways and less traps for the charge transport to occur in PANI films. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

From experimental data,the mechanics relationships describing the behaviour of four different low alloyed steel powders during uniaxial cold compaction

This work aims at determining the constitutive model of four commercial water atomised low alloyed steel powders during cold compaction. Single-action experiments were performed, obtaining cylindrical specimens with different H/D ratios. The distribution of axial and radial stresses was investigated, and the relationships describing both the radial stress transmission coefficient and the flow stress as functions of the relative density were determined. The radial stress transmission coefficient also confirmed the hypothesised value of Poisson’s coefficient. The friction coefficient between the powder column and the die wall was determined, also highlighting the influence of the H/D ratio. Measuring the axial and radial strains due to spring-back, the axial and radial elastic moduli were determined, as functions of the relative density. The results obtained for the four materials were compared, also highlighting both differences and similarities.     

Effect of diethyl ether blended with neem oil methyl esters in CI engine

Vegetable oils are now considered to be a potential alternative that can be used in place of partial or total substitution of diesel fuels. In this study, we used diethyl ether as an oxygenated additive to investigate the possible use of higher percentages of biodiesel in an unmodified diesel engine. Neem oil was selected for biodiesel production. The tests were performed at a steady-state condition in a single-cylinder constant speed DI diesel engine. The combustion process involved in diesel engine would be improved and the particulate matter would be reduced if these biodiesels are blended. An experimental investigation is carried out to establish the emission characteristics of a direct injection diesel engine using diethyl ether as additive in Neat Neem oil Biodiesel. Emissions of hydro carbon oxides of nitrogen and carbon monoxide significantly reduced by adding diethyl ether into neem oil biodiesel at 10% and 20% on volume basis.     

Investigation on mining subsidence over Appin–West Cliff Colliery using time-series SAR interferometry

Advanced Time Series InSAR (ATS-InSAR) generally refers to those TS-InSAR methods with an external distributed scatterer selection module, e.g. SqueeSAR?, and GEOS-ATSA (Advanced Time-Series Analysis). It is being known as a very efficient tool for monitoring ground deformation over suburban or non-urban regions with great success. However, research conducted using C-band Envisat-based ATS-InSAR failed to produce reasonable outcome within Appin Colliery primarily due to the underground mining effect, which is located in the southeastern corner of the Southern Coalfield, New South Wales, Australia; thus, the general underground mining pattern cannot be formed. This work presents a modified ATS-InSAR method for mapping the ground deformation over underground mining region. More specifically, in order to achieve the best outcome, a modified measurement scatterer (MS) pixel selection method is introduced by including less reliable MS pixels through an Inverse Distance Weighted-based integration method. In addition, the proposed method is also applied to C-band Sentinel-1 image stacks for testing purpose, and the final result proved to be efficient to offer sufficient information to the mining industry and government for risk management purpose.     

Predictive Thermal Inactivation Model for Effects and Interactions of Temperature, NaCl, Sodium Pyrophosphate, and Sodium Lactate on Listeria monocytogenes in Ground Beef

The effects and interactions of heating temperature (60 °C to 73.9 °C), salt (0.0 % to 4.5 %?w/v), sodium pyrophosphate (0.0 % to 0.5 %?w/v), and sodium lactate (0.0 % to 4.5 %?w/v) on the heat resistance of a five-strain mixture of Listeria monocytogenes in 75 % lean ground beef were examined. Meat samples in sterile filtered stomacher bags were heated in a temperature controlled waterbath to determine thermal death times. The recovery medium was tryptic soy agar supplemented with 0.6 % yeast extract and 1 % sodium pyruvate. Weibull survival functions were employed to model the primary survival curves. Then, survival curve-specific estimated parameter values obtained from the Weibull model were used for determining a secondary model. The results indicate that temperature and salt have a large impact on the inactivation kinetics of L. monocytogenes, while sodium lactate (NaL) has an impact in the presence of salt. The model presented in this paper for predicting inactivation of L. monocytogenes can be used as an aid in designing lethality treatments meant to control the presence of this pathogen in ready-to-eat products.     

Coarse-grained modeling of model poly(urethane urea)s: Microstructure and interface aspects

Poly(urethane urea) elastomers are versatile and can be tailored to exhibit a broad range of mechanical response under high strain rate deformation. In this work, we utilize coarse-grained molecular dynamics simulations to elucidate the molecular mechanisms, particularly the effects of hard segment content, intermolecular interaction, and rigidity of the interface between the hard and soft segments on local morphology and rate-dependent stress-strain behavior in the ballistic regime. Simulation results qualitatively agree with available experimental data, where analysis of hard segment orientation during tensile and compression deformation and dynamic strain rate sensitivity was also performed. Further study of the intermolecular interaction on the stress-strain behavior reveals that it has a strong effect on strain hardening, particularly for a rigid interface, once the hard segment content reaches the percolation threshold. Simulation results also show that interface intermolecular interaction could become more dominant over interface rigidity in the initial stress-strain response, particularly below percolation.