Unified full wave solutions to interpret Apollo lunar surface data

Bistatic radar experiments carried out by Tyler and Howard during the Apollo 14, 15, and 16 missions provide a very useful dataset with which to compare theoretical models and experimental data. Vesecky et al. (1988) report that their model for near grazing angles compares favorably to experimental data. However, for angles of incidence around 80°, all the analytical models considered by Vesecky et al. predict values for the quasi-specular cross sections that are about half the corresponding values taken from the Apollo 16 data. In this work, questions raised by this discrepancy between the reported analytical and experimental results are addressed. The unified full wave solutions are shown to be in good agreement with the bistatic radar data taken during Apollo 14 and 16 missions. Using the full wave approach, the quasi-specular contributions to the scattered field from the large scale surface roughness as well as the diffuse Bragg-like scattering from the small scale surface roughness are accounted for in a unified self-consistent manner. Since the full wave computer codes for the scattering cross sections contain ground truth data only, it is shown how it can be readily used to predict the rough surface parameters, based on the measured data     

Compact WLAN disc antennas

A novel conical beam patch antenna design, suitable for local area network applications, uses a central cylindrical connection from the disc to ground to achieve a large reduction in resonant size. Results on efficiency, bandwidth, and pattern are reported for several prototypes.     

Dynamic bandwidth allocation for quality-of-service over Ethernet PONs

Ethernet-based passive optical network (EPON) technology is being considered as a promising solution for next-generation broadband access networks due to the convergence of low-cost Ethernet equipment and low-cost fiber infrastructures. A major feature for this new architecture is the use of a shared transmission media between all users; hence, medium access control arbitration mechanisms are essential for the successful implementation of EPON: i.e., to ensure a contention-free transmission and provide end users with equal access to the shared media. We propose to use the multipoint control protocol defined by the IEEE 802.3ah task force to arbitrate the transmission of different users, and we present different dynamic bandwidth allocation (DBA) algorithms to allocate bandwidths effectively and fairly between end users. These DBA algorithms are also augmented to support differentiated services, a crucial requirement for a converged broadband access network with heterogeneous traffic. We show that queueing delays under strict bandwidth allocation algorithms result in an unexpected behavior for certain traffic classes, and we suggest the use of DBA with appropriate local queue management to alleviate this inappropriate behavior. We conduct detailed simulation experiments to study the performance and validate the effectiveness of the proposed protocols.     

BATCH SEQUENCING

Consider the single machine scheduling problem where there are a number of part types to be processed. A part type is defined as follows: Two parts are of the same part type if the machine does not require a setup in between the processing of these parts. The problem investigated in this paper is to find a sequence of batches of parts (if there are any) where all the requirements for parts are met. A heuristic and an exact algorithm are developed, and computational analysis is performed to measure the performance of the heuristic. The time complexity function of the heuristic is O(n²), and the exact algorithm runs in polynomial time given a fixed upper bound on the number of setups.     

Determination of gas dispersion in vapor extraction of heavy oil and bitumen

In this work, a mathematical model is developed and simulated to determine gas dispersion along with solubility during the vapor extraction (Vapex) of live oil from a laboratory scale physical model. The physical model is a rectangular block of homogenous porous medium saturated with heavy oil and bitumen. At a given temperature and pressure, the block is initially exposed on its side to a solvent gas, which diffuses into the medium and gets absorbed. The absorption of gas reduces the viscosity of heavy oil and bitumen causing it to drain under gravity. The low-viscosity “live oil” is produced at the bottom of the porous block. The production of live oil with time is accompanied by the shrinkage of oil in the block as well as its increased exposure to gas from top. These phenomena of Vapex are described by the mathematical model, which is used to calculate live oil production with various values of gas solubility and dispersion. Their optimal values are determined for the vapor extraction of Cold Lake bitumen with butane by matching calculated live oil production with its experimental values published earlier.     

Specimen preparation and image processing and analysis techniques for automated quantification of concrete microcracks and voids

Specimen preparation and image processing/analysis techniques were developed for use in automated quantitative microstructural investigation of concrete, focusing on concrete microcracks and voids. Different specimen preparation techniques were developed for use in fluorescent and scanning electron microscopy (SEM) of concrete; then techniques produce a sharp contrast between microcracks/voids and the body of concrete. The image processing/analysis techniques developed specifically for use with concrete address the following usages: automatic threshold; development of intersecting microcracks/voids and connected voids; distinction of microcracks form voids based on geometric attributes; and noise filtration.     

Architectures for Silicon Nanoelectronics and Beyond

Although nanoelectronics won't replace CMOS for some time, research is needed now to develop the architectures, methods, and tools to maximally leverage nanoscale devices and terascale capacity. Addressing the complementary architectural and system issues involved requires greater collaboration at all levels. The effective use of nanotechnology calls for total system solutions     

Comparative study of the electrical properties of diamond films grown by microwave plasma assisted and hot-filament chemical vapor deposition

Schottky diodes were built on different polycrystalline diamond films grown by Microwave Plasma and Hot Filament Chemical Vapor Deposition and their electrical properties were studied. The barrier height increased with the diamond film quality and the corresponding ideality factor decreased. Even though the lower-quality HFCVD film displayed poor rectifying properties, it was found to be much less sensitive to variations in the operating conditions (air vs. vacuum). The activation energies of the films depend on morphological parameters, as preferable grain size or orientation. The bulk conduction also depends on the quality of the deposited films, changing from ohmic to trap-free or shallow trap SCLC and SCLC with an exponential distribution of traps. The hypothesis of using the electrical measurements as an indicator for film quality has been discussed.     

Electrocopolymerization of aniline and ortho-phenylenediamine via facile negative shift of polyaniline redox peaks

Oxidative electropolymerization of aniline (Ani) in phosphoric acid (H₃PO₄) on composite 2B pencil graphite was accomplished using selected inorganic salts as supporting electrolytes. These salts determined the degree of conductivity of polyaniline (PAni) formed. The conductivity was in the order of CaCl₂ > KCl > ZnCl₂ > ZnSO₄ > Ca₃(PO₄)₂. The three pairs of redox peaks in the voltammogram of PAni formed in the presence of 0.06 M Ca₃(PO₄)₂ and 0.2 M ZnSO₄ have shifted 300 mV to the negative potential. The shifting of peaks is strongly influenced by type of anions' presence in the salts. However, the nature of the available cations had no significant effect. The negative shifts of redox peaks were exploited to facilitate the electrocopolymerization of Ani and ortho-phenylenediamine (oPD). The formation of the poly(Ani-co-oPD) was confirmed by the FTIR spectra.