拱肋间距对喷混凝土拱肋加固效应的影响研究

喷混凝土拱肋是加固软弱围岩的一种有效支护形式,其间距主要根据经验确定,可能偏大或偏小。为了揭示拱肋间距对加筋拱肋加固效应的影响,采用基于有限差分法的FLAC3D软件对施工期某地下厂房交通洞软弱围岩在拱肋间距分别在1.0―5.0m之间变化情况下变形、应力和屈服区等分布规律进行了对比仿真模拟。仿真结果表明:拱肋间距越大,围岩变形、顶拱最大主压应力和塑性屈服区越大,拱肋承受荷载越大;且拱肋间距介于2.0―3.0m时,能充分发挥围岩自承作用和拱肋支护潜力,围岩变形稳定满足要求,支护成本最低。本文的研究成果为确定喷混凝土拱肋合理间距提供了重要参考。     

大分子相容剂在填充聚烯烃中的应用

综述了国内外大分子相容剂在填充聚烯烃塑料中的应用，以及大分子相容剂改性填充聚烯烃塑料的物理与力学性能；指出大分子相容剂用于填充塑料，能改善高分子基体与填料间界面粘结，提高填充塑料复合材料的物理与力学性能，比传统有机偶联剂更具特点。     

多孔碳酸钙陶瓷--人造珊瑚的研究

天然珊瑚有三维贯通的多孔网络结构，它的主要成分碳酸钙(CaC03)在人体环境可降解。模拟珊瑚的组成与结构，研制新型的组织工程支架材料有着良好的应用前景。本文探索了多孔碳酸钙陶瓷的制备方法，并通过盐析法制备了一种多孔的碳酸钙陶瓷，有望获得高的孔隙率和孔连通性。     

MAH接枝EPDM增韧PA66的研究

研究了MAH(马来酸酐)接枝三元乙丙橡胶(EPDM—g-MAH)对尼龙66(PA66)的增韧作用。利用SEM(扫描电镜)观察了共混体系的微观形貌(形态结构)，并运用小角激光散射(SALS)方法研究了EPDM的加入对PA66结晶性能的影响。结果表明，未接枝的EPDM与PA66的相容性很差，而EPDM—g—MAH与PA66相容性明显增加，EPDM-g—MAH粒子均匀分散在PA66中，共混体系力学性能有很大提高。随着EPDM—g—MAH用量的增加，PA66球晶尺寸变小，共混体系界面结合更加紧密。     

BaTiO_3粉体中Ti/Ba比分析方法的比较

提出了用ＫＯＨ熔融分解ＢａＴｉＯ３粉体〔１〕，再用浓ＨＣｌ酸化后，用感应耦合等离子体发射光谱法（ＩＣＰ—ＡＥＳ法）测定试样中的Ｔｉ／Ｂａ比，并与化学分析法的结果作了比较，显示出ＩＣＰ—ＡＥＳ法简便，快速，结果更好。     

Preparation and characterization of porous carbon beads and their application in dispersing small metal crystallites

Porous carbon beads were prepared by the pyrolysis of poly(vinylidene chloride) beads that were synthesized by suspension polymerization. After prolysis treatment at 180–300 °C under argon stream, the polymeric beads were further carbonized at 1000 °C for 3 h under argon stream to acquire porous carbon beads, of which the specific surface area was about 1000 m²/g, and pore size was mainly in the width range of 0.8–1.2 nm. The carbon structure and surface chemical composition characterized by X-ray diffraction and X-ray photoelectron spectroscopy, depended on the preparation temperature and the relations between them were examined. The characterization of the carbon beads by scanning electron microscopy, atomic force microscopy presented the morphological structure of the carbon beads surface and a global view of pores. The dispersion of nickel crystallites on the carbon beads surface was characterized by electron microprobe analysis. This study reveals that uniform surface morphological structure leads to the fine dispersion of metal crystallites.     

2种C1化工路线制乙二醇技术经济分析

介绍了以煤炭或天然气衍生的合成气为原料,一步法直接合成和经甲醛(或草酸酯)间接法合成乙二醇工艺的历史和进展,并对这2条被认为是有希望在不远的将来实现产业化的技术路线进行了工艺比较和经济性比较。认为CO经草酸酯合成乙二醇技术路线具有反应条件温和、设备投资小、环境友好等优点,并且其产品工厂成本低18.7%,是首选的C1化工合成乙二醇技术路线。     

Effect of miscibility and forced compatibility on damping properties of CIIR/PAc blend

In this study, a kind of novel damping materials was prepared based on the blend of chlorinated butyl rubber (CIIR) and polyacrylate (PAc) synthesized by different molar ratio of butyl methacrylate and ethyl acrylate. Research results from experiments and analyses by employing DMA, TEM, and FTIR show that whether at a cocured system or noncocured system, it can be achieved to shift a loss peak of CIIR towards a higher temperature region and to keep the damping value from markedlly decreasing, which broadens the effective damping function area of CIIR to the vicinity of ambient temperature. In the former system, the thermodynamical miscibility of CIIR and PAc, to some extent, is predominated by the molecular design of PAc, while in the latter system, covulcanized networks play a more significant role in improving compatibility and abating the peak split, though the suppression effect of thermal stress on the transition of CIIR T_ll transition still can not be neglected. Furthermore, transition state derived from the cocuring CIIR and PAc cannot make the phase separation completely take place, and consequently results in the deformation of phase morphology of the cocured CIIR/PAc blend. It is the influence of thermodynamics miscibility and forced compatibility in different size that makes the suppression effect of foreign PAc on CIIR T_ll transition be controllable. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3127–3133, 2006     

氧氯化反应器蛇管的制造工艺

介绍了氧氯化反应器蛇管在国产化过程中的制造简便、组装准确可靠的制造工艺，并对该蛇管中的定位套作了合理的改进     

07MnCrMoVR钢焊件疲劳裂纹扩展速率

为鉴定０７ＭｎＣｒＭｏＶＲ钢焊件的疲劳性能，通过试验得到了焊接接头以及焊接热影响区的疲劳裂纹扩展速率，同时给出了它们存活率为９７．７３％时的各自疲劳裂纹扩展速率，并对焊接接头与焊接热影响区疲劳裂纹扩展速率进行比较。最后还把结果与“在役含缺陷压力容器安全评定规程”［１］和ＢＳＩＰＤ６４９３［２］推荐结果进行了对比，认为该钢种疲劳裂纹扩展速率在其容许范围内慢于１６ＭｎＲ钢的疲劳裂纹扩展速率