Effect of self-etching dual-curing universal adhesive system application on bond strength of dentin resinous liners dentin

Purpose: The aim of this study was to evaluate the influence of previous application of an adhesive system on bond strength of resinous liner materials to dentin. Methods: Ninety bovine incisors crowns had a 6 × 6 mm area of dentin exposed, with minimum of 2 mm thickness. They were embedded in acrylic resin, and the dentin was polished with P600 SiC sandpaper for 30 s to standardize the smear layer. The specimens were divided into 6 groups (n = 15) according to the application or not of a self-etching system (Futurabond U – Voco) and the type of resinous liner used: A+Ionoseal (adhesive and Ionoseal – Voco); Ionoseal (Ionoseal only); A+Vitrebond (adhesive and Vitrebond – 3M/ESPE); Vitrebond (Vitrebond only); A+Ionosit (adhesive and Ionosit – DMG) and Ionosit (Ionosit only). Adhesives were used following manufacturer’s instructions, and the liner materials were applied inside a 2-mm-depth matrix and light-cured for 20 s. The bond strength was measured by microtensile test, using a universal testing machine with a cross-speed of 1 mm/min. Data were analyzed using one-way ANOVA and Tukey’s test (p < 0.05). Results: The adhesive system application increased bond strength of all liners tested. Ionoseal presented the highest bond strength when the adhesive system was used and exhibited similar performance to Vitrebond without adhesive. Ionosit without adhesive showed the smallest bond strength compared with the other liners tested. Conclusion: The application of an adhesive system prior to the use of the resinous liners improved the bond strength to dentin and should be preconized.     

Fabrication of Barium Strontium Titanate (Ba0.6Sr0.4 TiO3) 3D Microcomponents from Aqueous Suspensions

This study reports on the fabrication of BST (Ba_0.6Sr_0.4TiO₃)‐based 3D microcomponents through an aqueous colloidal approach. The BST powder was synthesized by solid‐state reaction assisted by thermal analysis and XRD diffraction. Well crystalline cubic BST single phase was obtained upon heat‐treating the precursor powder mixture at 1200°C–1250°C. The reactivity of the BST powder toward water was evaluated by the changes in pH and concentration of leached ionic species along aging time. Hydrolysis reactions were suppressed by chemisorbing a suitable phosphate‐based protective agent and enabled an excellent dispersion ability to be achieved. Aqueous suspensions with solids loadings as high as 50 vol% that are stable against hydrolysis for several days could easily be prepared from the surface‐treated BST powder in aqueous solutions of an epoxy resin. After adding a suitable hardener, the colloidal suspensions could easily be cast into soft silicon rubber molds to obtain homogeneous and high dense green BST bodies.     

Analysis of polyolefin compositions through near infrared spectroscopy

In this work, NIRS is employed to provide compositions of α‐olefin copolymers, allowing for evaluation of the effects of certain key process variables on the final NIR spectral responses of obtained polymer materials. This work also introduces a new temperature programmed analytical technique, which combines NIRS measurements with partial fractionation of α‐olefin copolymers. The new proposed technique can be used for evaluation of polyolefin compositions, as presented here for poly(propene/1‐butene) copolymers. Besides, preliminary results obtained from thermal fractionation experiments indicate that this new proposed experimental technique can be employed for characterization of comonomer sequence distributions of α‐olefin copolymers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40127.     

Formal [3+2] Annulation Involving Allylic Bromides and Thioureas. Synthesis of 2‐Iminothiazolidines through a Base‐Catalyzed Intramolecular anti‐Michael Addition

A simple and efficient protocol was developed for the synthesis of 2‐iminothiazolidines through a base‐mediated [3+2] annulation involving substituted thioureas and allylic bromides bearing electron‐withdrawing groups. This domino process consists of nucleophilic displacement, followed by intramolecular anti‐Michael addition of the preformed allylic isothiourea under mild conditions to give the thiazolidine core.

     

Recovery of vinyl chloride from by-streams of polyvinyl chloride production by TPSA in a multitubular adsorber

This work aims at developing an efficient and feasible adsorption-based separation process for the separation of vinyl chloride and nitrogen, on activated carbon, by employing a multitubular packed bed geometry, with adsorbent material inside the tubes. Using this geometry, a 2-dimensional mathematical model of a temperature pressure swing adsorption process was used to developed a 6-step three multitubular adsorbers system capable of separating and purifying an industrial scale gas stream of a 40:60% (v/v) vinyl chloride/nitrogen mixture into a 95% (v/v) vinyl chloride stream and a nitrogen stream with a vinyl chloride limit concentration of 8 ppm (w/w). The process reported energy consumption of 4.88 × 10⁶ J/kg_VCM and recovery capacity of 24.35 kg_VCM/(m³_unit h). The multitubular geometry enabled the use of lower adsorbent loads, shorter cycle times, and lower regeneration temperatures. An equivalent 1-dimensional model has also shown to satisfactorily estimate the performance of the current equipment.     

Synthesis and analysis of phase segregation of polystyrene-block-poly(methyl methacrylate) copolymer obtained by Steglich esterification from semitelechelic blocks of polystyrene and poly(methyl methacrylate)

Here, an alternative route to successfully synthesize polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) is reported. Steglich esterification was used as an effective, metal free approach for coupling carboxylic terminated PS and the hydroxyl end-functionalized PMMA chains obtained by nitroxide-mediated polymerization and atom transfer radical polymerization, respectively. α-Functionalization was obtained using 4,4′-azobis(4-cyanovaleric acid) and 2,2,2-tribromoethanol as initiators. The synthesis of PS-b-PMMA was confirmed by gel permeation chromatography and nuclear magnetic resonance (NMR), while the dependence of the diffusion coefficients of the polymers (PS, PMMA, PS/PMMA blend, and PS-b-PMMA) with their corresponding molecular weights was discussed based on the results of atomic force microscopy-based infrared spectroscopy, differential scanning calorimetry, and spectra of diffusion-ordered NMR spectroscopy. Differently from PS-b-PMMA, a partial segregation was observed for the PS/PMMA blend, affecting its thermal behavior and diffusion coefficient. The study here presented provides an easier and efficient strategy for the synthesis of PS-b-PMMA and new insights into the diffusion of polymers.     

Short-Term Immune Responses of Gilthead Seabream (Sparus aurata) Juveniles against Photobacterium damselae subsp. piscicida

Photobacteriosis is a septicaemic bacterial disease affecting several marine species around the globe, resulting in significant economic losses. Although many studies have been performed related to the pathogen virulence and resistance factors, information regarding the host defence mechanisms activated once an infection takes place is still scarce. The present study was designed to understand innate immune responses of farmed juvenile gilthead seabream (Sparus aurata) after Photobacterium damselae subsp. piscicida (Phdp) infection. Therefore, two groups of seabream juveniles were intraperitoneally injected with 100 µL of PBS (placebo) or 100 µL of exponentially growing Phdp (1 × 10⁶ CFU/mL; infected). The blood, plasma, liver, and head kidney of six fish from each treatment were sampled immediately before infection and 3, 6, 9, 24 and 48 h after infection for the broad screening of fish immune and oxidative stress responses. Infected animals presented marked anaemia, neutrophilia and monocytosis, conditions that are correlated with an increased expression of genes related to inflammation and phagocytic activity. Similar studies with different fish species and bacteria can be useful for the definition of health biomarkers that might help fish farmers to prevent the occurrence of such diseases.