Randomization can be a healer: consensus with dynamic omission failures

Wireless ad-hoc networks are being increasingly used in diverse contexts, ranging from casual meetings to disaster recovery operations. A promising approach is to model these networks as distributed systems prone to dynamic communication failures. This captures transitory disconnections in communication due to phenomena like interference and collisions, and permits an efficient use of the wireless broadcasting medium. This model, however, is bound by the impossibility result of Santoro and Widmayer, which states that, even with strong synchrony assumptions, there is no deterministic solution to any non-trivial form of agreement if n ? 1 or more messages can be lost per communication round in a system with n processes. In this paper we propose a novel way to circumvent this impossibility result by employing randomization. We present a consensus protocol that ensures safety in the presence of an unrestricted number of omission faults, and guarantees progress in rounds where such faults are bounded by ${f \,{\leq}\,\lceil \frac{n}{2} \rceil (n\,{-}\,k)\,{+}\,k\,{-}\,2}$ , where k is the number of processes required to decide, eventually assuring termination with probability 1.     

Dielectric spectroscopy of MgTiO3-based ceramics in the 109–1014Hz region

Magnesium titanate (MgTiO₃) powder was prepared by a chemical route (Pechini method) and different dopants were added to prepare several compositions. These pure and doped compositions were sintered in air and dense ceramics were obtained. The pure MgTiO₃ samples were also subjected to different heat treatments during sintering. Complex permittivity spectra of ceramic samples were determined by various techniques in the 10⁹–10¹⁴ Hz range. These techniques included infrared spectroscopy in transmission and reflectivity modes and microwave dielectric measurements. Extrapolation to microwave frequencies from infrared data, according to the proportionality (v) v, agrees quite well with the microwave data measured at 8 GHz and it is a useful procedure to estimate intrinsic microwave losses. Fast cooling from high temperatures of MgTiO₃ samples increased dielectric loss, probably due to a structural disorder. Dopants have two types of effect depending on whether they form a distinct second phase or a solid solution with MgTiO₃. In this last case intrinsic losses are strongly affected.     

BENCHMARKING RIVER HABITAT IMPROVEMENT

River ecosystems have witnessed a long history of human pressure, particularly the disruption of freshwater fish populations. The awareness of this situation has led to many habitat improvement projects, with a variable degree of success. In natural situations, fish populations co‐inhabit throughout the hydrological cycle with different degrees of adequacy, and the sequence of favourable and unfavourable conditions dictates abiotic constraints and biotic interactions that shape the final biological assemblages. We postulate that a part of unsuccessful restoration results is related to insufficient closeness to the natural habitat conditions of the river type that is to be restored, including the naturally adverse periods. We used the river2d model to predict habitat availability as weighted usable area (WUA) at a degraded site that is to be restored, for two native Mediterranean species and their life stages—the Southwestern nase Iberochondrostoma almacai and the Arade chub Squalius aradensis. We then analysed the yearly evolution of the natural WUA at a nearby reference site. Overall, the reference site exhibited the longest periods during which the WUA was continuously lower than the chosen WUA thresholds for each of the four bioperiods. Considerable divergences from natural habitat availability values can be seen for the spawning, rearing and growth bioperiods. Restoration outcomes can result in appreciable deviations—favourable or unfavourable to fish populations—from the WUA occurring under natural conditions over the course of the year. Restoration should therefore take account of local hydraulic and habitat patterns that govern population dynamics and result in the final fish assemblage. Copyright © 2011 John Wiley & Sons, Ltd.     

Pressureless sintering of in-situ toughened Yb α-SiAlON ceramics by adding seed crystals prepared by combustion synthesis

Single-phase Yb α-SiAlON ceramics in-situ toughened by elongated grains were prepared by pressureless sintering, with the crystalline powder prepared by combustion synthesis used as seed crystals. The effects of seed addition on the densification, phase transformation, microstructure development, and mechanical properties of the samples were investigated in detail. From the experimental results, it was found that the added seed crystals could promote the phase transformation and facilitate the growth of elongated grains. By adding seed crystals the fracture toughness of the sintered α-SiAlON ceramics was considerably improved, with no obvious degradation in the bulk density and hardness at the same time.     

Natural frequencies of functionally graded plates by a meshless method

We use the global collocation method, the first and the third-order shear deformation plate theories, the Mori–Tanaka technique to homogenize material properties, and approximate the trial solution with multiquadric radial basis functions to analyze free vibrations of functionally graded plates. Frequencies computed by the present method are found to agree well with those from the analytical solution of Vel and Batra, and the numerical solution of Qian et al. based on the meshless local Petrov–Galerkin formulation.     

Nanostructured Ni-Co alloys with tailorable grain size and twin density

We present an experimental approach to systematically produce nanostructures with various grain sizes and twin densities in the Ni-Co binary system. Using electrodeposition with various applied current densities and organic additive contents in the deposition bath, we synthesize nanostructured fcc and hcp solid solutions with a range of compositions. Due to the low stacking fault energy (SFE) of these alloys, growth twins are readily formed during deposition, and by adjusting the deposition conditions, a range of twin boundary densities is possible. The resulting nanostructured alloys cannot be described by a single characteristic length scale, but instead must be characterized in terms of (1) a true grain size pertaining to general high-angle grain boundaries and (2) an effective grain size that incorporates twin boundaries. Analysis of Hall-Petch strength scaling for these materials is complicated by their dual length scales, but the hardness trends found in Ni-80Co are found to be roughly in line with those seen in pure nanocrystalline nickel.     

Cryo-X-ray analysis-A novel tool to better understand the physicochemical reactions at the bioglass/biological fluid interface

The present study deals with the short-term physicochemical reactions at the interface between bioactive glass particles [55SiO(2)-20CaO-9P(2)O(5)-12Na(2)O-4MgO. mol%] and biological fluid (Dulbecco Modified Eagle's Medium (DMEM)). The physicochemical reactions within the interface are characterized by scanning transmission electron microscopy (TEM) (STEM) associated with Energy-dispersive X-ray spectroscopy (EDXS). Microanalysis of diffusible ions such as sodium, potassium, or oxygen requires a special care. In the present investigation the cryo-technique was adopted as a suitable tool for the specimen preparation and characterization. Cryosectioning is essential for preserving the native distribution of ions so that meaningful information about the local concentrations can be obtained by elemental microanalysis. The bioglass particles immersed in biological fluid for 24 h revealed five reaction stages: (i) dealkalization of the surface by cationic exchange (Na(+), Ca(2+) with H(+) or H(3)O(+)); (ii) loss of soluble silica in the form of Si(OH)(4) to the solution resulting from the breakdown of Si--O--Si bonds (iii); repolymerization of Si(OH)(4) leading to condensation of SiO(2)); (iv) migration of Ca(2+) and PO(4) (3-) to the surface through the SiO(2)-rich layer to form CaO-P(2)O(5) film; (v) crystallization of the amorphous CaO-P(2)O(5) by incorporating OH-- or CO(3) (2-) anions with the formation of three different surface layers on the bioactive glass periphery. The thickness of each layer is approximately 300 nm and from the inner part to the periphery they consist of Si--OH, which permits the diffusion of Ca(2+) and PO(4) (3-) ions and the formation of the middle Ca--P layer, and finally the outer layer composed of Na--O, which acts as an ion exchange layer between Na(+) ions and H(+) or H(3)O(+) from the solution.     

A new laser Doppler flowmeter prototype for depth dependent monitoring of skin microcirculation

Laser Doppler flowmetry (LDF) is now commonly used in clinical research to monitor microvascular blood flow. However, the dependence of the LDF signal on the microvascular architecture is still unknown. That is why we propose a new laser Doppler flowmeter for depth dependent monitoring of skin microvascular perfusion. This new laser Doppler flowmeter combines for the first time, in a device, several wavelengths and different spaced detection optical fibres. The calibration of the new apparatus is herein presented together with in vivo validation. Two in vivo validation tests are performed. In the first test, signals collected in the ventral side of the forearm are analyzed; in the second test, signals collected in the ventral side of the forearm are compared with signals collected in the hand palm. There are good indicators that show that different wavelengths and fibre distances probe different skin perfusion layers. However, multiple scattering may affect the results, namely the ones obtained with the larger fibre distance. To clearly understand the wavelength effect in LDF measurements, other tests have to be performed.     

Hyaluronic Acid Scaffolds for Loco-Regional Therapy in Nervous System Related Disorders

Hyaluronic acid (HA) is a Glycosaminoglycan made of disaccharide units containing N-acetyl-D-glucosamine and glucuronic acid. Its molecular mass can reach 10 MDa and its physiological properties depend on its polymeric property, polyelectrolyte feature and viscous nature. HA is a ubiquitous compound found in almost all biological tissues and fluids. So far, HA grades are produced by biotechnology processes, while in the human organism it is a major component of the extracellular matrix (ECM) in brain tissue, synovial fluid, vitreous humor, cartilage and skin. Indeed, HA is capable of forming hydrogels, polymer crosslinked networks that are very hygroscopic. Based on these considerations, we propose an overview of HA-based scaffolds developed for brain cancer treatment, central and peripheral nervous systems, discuss their relevance and identify the most successful developed systems.