Effect of Enameling on the Strength and Dynamic Fatigue of Soda–Lime–Silica Float Glass

The effect of a glass enamel coating on the strength and fatigue behavior of float glass was investigated. Commercially available enamel that was comprised of Cu₂Cr₂O₄ pigment particles in a bismuth-zinc borosilicate glass matrix was applied to a soda–lime–silica float glass via screen printing, followed by fusion at elevated temperature. Strengths of the enameled specimens were evaluated in biaxial flexure using a ring-on-ring (ROR) test geometry, and the data were analyzed using a conventional two-parameter Weibull distribution. Enameling was found to significantly degrade the strength of the float glass. There was no statistical difference in the characteristic strengths of samples enameled on the air side (66 MPa) compared with samples enameled on the tin side (61 MPa) of the float glass. Fractographic analysis revealed that the failures in the enameled float glass samples initiated at pores and pigment aggregates in the enamel, whereas failures in float glass samples initiated solely from surface flaws. Dynamic fatigue tests were performed on enameled float glass and indented float glass samples to determine the effect of the enamel on the stress corrosion behavior of the enameled components. There was no statistically significant difference between the stress corrosion exponents for the float glass and enameled float glass specimens.     

Elastomeric properties of ethylene/propylene copolymers prepared by zirconocene/methylaluminoxane catalysts

Ethylene/propylene copolymers (EPM) have been prepared by a liquid propylene suspension process, using homogeneous catalysts based on nonbridged zirconocenes and methylaluminoxane (MAO). When bis(η⁵-cyclopentadienyl)zirconium dichloride (Cp₂ZrCl₂), bis(η⁵-cyclopentadienyl) dimethyl zirconium (Cp₂ZrMe₂) and bis(η⁵-cyclopentadienyl), dibenzyl zirconium (Cp₂ZrBz₂) were used as catalyst components, EPM having low average molecular weight (MW) were in general obtained in low yield. On the contrary, a very large improvement of productivity and MW was observed when bis(η⁵-indenyl)zirconium dichloride (Ind₂ZrCl₂) and bis(η⁵-indenyl) dimethyl zirconium (Ind₂ZrMe₂) as well as bis(η⁵-tetrahydroindenyl)zirconium dichloride [(IndH₄)₂ZrCI₂] were employed in combination with MAO. In particular, this last catalytic system allowed one to obtain EPM with a narrower distribution of MW in addition to the above characteristics. Better performances, in terms of rheological and elastomeric properties, were also found for the crude and vulcanized samples prepared by (IndH₄)₂ZrCl₂/MAO catalyst.     

Practical and theoretical molecular weights in polyaddition reactions of ethylene and propylene oxide

The addition reactions of ethylene oxide and/or propylene oxide catalyzed by KOH and initiated with compounds containing free hydroxyls are followed by secondary reactions which vary the expected molecular weight. By using ethylene oxide, diols are formed and by using propylene oxide, both diols and unsaturated monofunctional compounds are formed. These products are usually characterized by their hydroxyl number. The average molecular weight is found by taking into consideration the starter functionality only. There are often some behavioral differences among similar products owing to the different quantity and chain length of the secondary products contained therein. The secondary products are analyzed and the quantity of the secondary products were determined from the hydroxyl number values and from the unsaturation of reagents and products. In the case of monofunctional adducts using the calculation method, the results have been experimentally confirmed.     

Catalytic performance of Co3O4/CeO2 and Co3O4/CeO2–ZrO2 composite oxides for methane combustion: Influence of catalyst pretreatment temperature and oxygen concentration in the reaction mixture

The influence of catalyst pre-treatment temperature (650 and 750 °C) and oxygen concentration (λ = 8 and 1) on the light-off temperature of methane combustion has been investigated over two composite oxides, Co₃O₄/CeO₂ and Co₃O₄/CeO₂–ZrO₂ containing 30 wt.% of Co₃O₄. The catalytic materials prepared by the co-precipitation method were calcined at 650 °C for 5 h (fresh samples); a portion of them was further treated at 750 °C for 7 h, in a furnace in static air (aged samples).

Tests of methane combustion were carried out on fresh and aged catalysts at two different WHSV values (12 000 and 60 000 mL g⁻¹ h⁻¹). The catalytic performance of Co₃O₄/CeO₂ and Co₃O₄/CeO₂–ZrO₂ were compared with those of two pure Co₃O₄ oxides, a sample obtained by the precipitation method and a commercial reference. Characterization studies by X-ray diffraction (XRD), BET and temperature-programmed reduction (TPR) show that the catalytic activity is related to the dispersion of crystalline phases, Co₃O₄/CeO₂ and Co₃O₄/CeO₂–ZrO₂ as well as to their reducibility. Particular attention was paid to the thermal stability of the Co₃O₄ phase in the temperature range of 750–800 °C, in both static (in a furnace) and dynamic conditions (continuous flow). The results indicate that the thermal stability of the phase Co₃O₄ heated up to 800 °C depends on the size of the cobalt oxide crystallites (fresh or aged samples) and on the oxygen content (excess λ = 8, stoichiometric λ = 1) in the reaction mixture. A stabilizing effect due to the presence of ceria or ceria–zirconia against Co₃O₄ decomposition into CoO was observed.

Moreover, the role of ceria and ceria–zirconia is to maintain a good combustion activity of the cobalt composite oxides by dispersing the active phase Co₃O₄ and by promoting the reduction at low temperature.     

Lecithin-protein interaction in the GTP-dependent acyl-CoA synthase

The enzymic activity of the GTP-dependent acyl-CoA synthase isolated from rat liver mitochondria is affected by removal and addition of lecithin (3). Purified preparations of this enzyme contain bound lecithin. In this presentation the nature of the lecithin-protein interaction is examined. From binding measurements at different temperatures it is possible to postulate which type of secondary valence bonds is holding the protein and lecithin together. Presented at AOCS Meeting, Chicago, October 1967.     

Kinetic folding mechanism of PDZ2 from PTP-BL

PDZ domains represent a large family of protein-interaction modules associated with a variety of unrelated proteins with different functions. We report a complete characterization of the kinetic folding mechanism of a fluorescent variant of PDZ2 from PTP-BL, investigated under a variety of different experimental conditions. For this purpose, we engineered a fluorescent variant of this protein Y43W (called pseudo-wild-type, pWT43). The results suggest the presence of a high-energy intermediate in the folding of PDZ2, as revealed by a pronounced non-linear dependence of the unfolding rate constant on denaturant concentration. Such an intermediate may or may not be detectable depending on the experimental conditions, giving rise to apparent two-state folding under stabilizing conditions (e.g. in the presence of sodium sulfate). Interestingly, even under these conditions, three-state folding can be restored by selectively destabilizing the native-like rate-limiting barrier by one specific mutation (V44A). Finally, we show that data taken on pWT43 under different experimental conditions (e.g. different pH values from 2.1 to 8.0 or in the presence of a stabilizing salt) and also data on a site-directed conservative mutant can be rationalized in terms of a simple reaction scheme involving a single set of intermediates and transition states.     

Effects of acid leaching treatment of soda-lime silicate glass on crack initiation and fracture

Water or acid soaking surface treatments have been shown to increase the mechanical strength of soda-lime silicate (SLS) glasses. This increase in strength has traditionally been attributed to effects related to residual stress or changes in fracture resistance. In this work, we report experimental data that cannot be explained based on the existing knowledge of glass surface mechanics. In dry environments, annealed and acid-leached SLS surfaces have comparable crack initiation stress and fracture stress as measured by Hertzian indentation and biaxial bending tests, respectively. Yet, in the presence of humidity, acid-leached surfaces have higher failure stress than the annealed surfaces. This apparent enhancement in the crack resistance of the acid-leached surface of SLS glass in humid environments supports the hypothesis that acid-leached surface chemistry can lower the transport kinetics of molecular water to critical flaws.     

Mocking Ads through Mobile Web Services

The need for creativity is ubiquitous, and mobile devices connected to Web services can help us. Linguistic creativity is widely used in advertisements to surprise us, to get our attention, and to stick concepts in our memory. However, creativity can also be used as a defense. When we walk in the street, we are overwhelmed by messages that try to get our attention with any persuasive device at hand. As messages get ever more aggressive, often our basic cognitive defenses—trying not to perceive those messages—are not sufficient. One advanced defensive technique is based on transforming the perceived message into something different (for instance, making use of irony or hyperbole) from what was originally meant in the message. In this article, we describe an implemented application for smartphones, which creatively modifies the linguistic expression in a virtual copy of a poster encountered on the street. The mobile system is inspired by the subvertising practice of countercultural art.     

Recommending multimedia visiting paths in cultural heritage applications

The valorization and promotion of worldwide Cultural Heritage by the adoption of Information and Communication Technologies represent nowadays some of the most important research issues with a large variety of potential applications. This challenge is particularly perceived in the Italian scenario, where the artistic patrimony is one of the most diverse and rich of the world, able to attract millions of visitors every year to monuments, archaeological sites and museums. In this paper, we present a general recommendation framework able to uniformly manage heterogeneous multimedia data coming from several web repositories and to provide context-aware recommendation techniques supporting intelligent multimedia services for the users—i.e. dynamic visiting paths for a given environment. Specific applications of our system within the cultural heritage domain are proposed by means of real case studies in the mobile environment related both to an outdoor and indoor scenario, together with some results on user’s satisfaction and system accuracy.     

Conceptual aspects of geometric quantum computation

Geometric quantum computation is the idea that geometric phases can be used to implement quantum gates, i.e., the basic elements of the Boolean network that forms a quantum computer. Although originally thought to be limited to adiabatic evolution, controlled by slowly changing parameters, this form of quantum computation can as well be realized at high speed by using nonadiabatic schemes. Recent advances in quantum gate technology have allowed for experimental demonstrations of different types of geometric gates in adiabatic and nonadiabatic evolution. Here, we address some conceptual issues that arise in the realizations of geometric gates. We examine the appearance of dynamical phases in quantum evolution and point out that not all dynamical phases need to be compensated for in geometric quantum computation. We delineate the relation between Abelian and non-Abelian geometric gates and find an explicit physical example where the two types of gates coincide. We identify differences and similarities between adiabatic and nonadiabatic realizations of quantum computation based on non-Abelian geometric phases.