Fully renewable limonene‐derived polycarbonate as a high‐performance alkyd resin

Limonene‐derived polycarbonate‐based alkyd resins (ARs) have been prepared by copolymerization of limonene dioxide with CO₂, catalysed by a β‐diiminate zinc–bis(trimethylsilyl)amido complex, and subsequent chemical modification with soybean oil fatty acids using triphenylethylphosphonium bromide as the catalyst. This quantitative partial modification was realized via epoxy–carboxylic acid chemistry, affording ARs with higher oil lengths, lower polydispersities and higher glass transition temperatures (T_g) in comparison to a conventional polyester AR based on phthalic acid, multifunctional polyol pentaerythritol and soybean fatty acid. The novel limonene polycarbonate AR and the conventional polyester AR were evaluated as coatings and both the physical drying (without the presence of the oxidative drying accelerator Borchi® Oxy Coat) and chemical curing (with Borchi® Oxy Coat) processes of these coatings were monitored by measuring the König hardness and complex modulus development with time. A better performance was obtained for the alkyd paint containing polycarbonates modified with fatty acids (FA‐PCs), which showed a faster chemical drying, a higher König hardness and a higher T_g in coating evaluation, demonstrating that the fully renewable FA‐PCs are promising resins for alkyd paint applications. © 2019 Society of Chemical Industry     

Some elements in domestic and imported fresh fruits marketed in the Netherlands

Summary Sodium, potassium, arsenic, selenium and tin have been determined in 38 different types of domestic and imported fresh fruits. All samples (n=242) were analysed for Na und K whereas a limited number of samples (n=85) of each fruit type was selected for the determination of As, Se and Sn. The median contents, in mass fractions of the edible portion, found for fresh fruits are: Na<0.001%; K 0.17%; As 4 g/kg; Se 2 g/kg and Sn< 0.05 mg/kg. The corresponding 90th percentile values are: Na 0,002%, K 0.34%; As 12 g/kg; Se 10 g/kg and Sn 0.10 mg/kg. Results for selenium reported here differ substantially from those given for a number of fresh fruits in the German Food Composition Tables 1986/1987. The average consumption of 129 g fresh fruit by Dutch citizens in the age category of 22–75 years contributes, in general, marginally to the total daily dietary intake of sodium, arsenic, selenium and tin. Fresh fruit can contribute substantially, up to 23%, to the average oral daily intake of potassium.

---

Einige Mineralstoffe im einheimischen und importierten Frischobst vom niederländischen Markt

Zusammenfassung Natrium, Kalium, Arsen, Selen und Zinn wurden in 38 verschiedenen Sorten von in- und ausländischem Frischobst bestimmt. Alle Proben (n=242) wurden auf Na und K untersucht; während nur eine beschränkte Zahl von Proben (n=85) für die Bestimmung von As, Se und Sn ausgewählt wurde. Die Medianwerte, in Massenanteilen der eßbaren Portionen, betrugen für frisches Obst: Na<0,001%; K 0,17% As 4 g/kg; Se 2 g/kg und Sn<0,05 mg/kg. Die dazugehörigen Werte für den 90 Perzentil sind: Na 0,002%; K 0,34%; As 12 g/kg; Se 10 g/kg und Sn 0,10 mg/kg. Für einige Obstsorten wurden Selenwerte erhalten, die erheblich von denen der Deutschen Nährwert-Tabellen 1986/1987 abweichen. Frischobst, dessen Verzehr für Einwohner der Niederlande in der Altersklasse von 22–75 Jahre im Schnitt 129 g/Tag beträgt, liefert einen vernachlässigbaren Beitrag zur täglichen Einnahme von Natrium, Arsen, Selen und Zinn; für Kalium hingegen kann dieser Beitrag, mit bis zu 23%, erheblich sein.

     

Vitamin C Enhances Vitamin E Status and Reduces Oxidative Stress Indicators in Sea Bass Larvae Fed High DHA Microdiets

Docosahexaenoic acid (DHA) is an essential fatty acid necessary for many biochemical, cellular and physiological functions in fish. However, high dietary levels of DHA increase free radical injury in sea bass (Dicentrarchus labrax) larvae muscle, even when vitamin E (α-tocopherol, α-TOH) is increased. Therefore, the inclusion of other nutrients with complementary antioxidant functions, such as vitamin C (ascorbic acid, vitC), could further contribute to prevent these lesions. The objective of the present study was to determine the effect of vitC inclusion (3,600?mg/kg) in high DHA (5?% DW) and α-TOH (3,000?mg/kg) microdiets (diets 5/3,000 and 5/3,000?+?vitC) in comparison to a control diet (1?% DHA DW and 1,500?mg/kg of α-TOH; diet 1/1,500) on sea bass larvae growth, survival, whole body biochemical composition and thiobarbituric acid reactive substances (TBARS) content, muscle morphology, skeletal deformities and antioxidant enzymes, insulin-like growth factors (IGFs) and myosin expression (MyHC). Larvae fed diet 1/1,500 showed the best performance in terms of total length, incidence of muscular lesions and ossification degree. IGFs gene expression was elevated in 5/3,000 diet larvae, suggesting an increased muscle mitogenesis that was confirmed by the increase in the mRNA copies of MyHC. vitC effectively controlled oxidative damages in muscle, increased α-TOH larval contents and reduced TBARS content and the occurrence of skull deformities. The results of the present study showed the antioxidant synergism between vitamins E and C when high contents of DHA are included in sea bass larvae diets.     

A crossover‐UNIQUAC model for critical and noncritical LLE calculations

A new model, named the crossover‐UNIQUAC model, has been proposed based on the crossover procedure for predicting constant‐pressure liquid–liquid equilibria (LLE). In this manner, critical fluctuations were incorporated into the classical UNIQUAC equation. Coexistence curves were estimated for systems having a diverse range of asymmetries. These systems included the LLE of five different mixtures, composed of nitrobenzene with one of the members of the alkane homologous family (either pentane, octane, decane, dodecane, or tetradecane), as well as an extra system having a different chemical nature, namely the mixture of n‐perfluorohexane and hexane, to further check the validity of the proposed approach. Using these nonideal mixtures, the validity of the new model was investigated within wide ranges, covering near‐critical to regions falling far away from the critical point. The graphical trends, as well as the quantitative comparison with experimental data indicated the good agreement of the proposed model results with the experimental data. A maximum AARD% value of 3.97% was obtained in calculating molar compositions by the proposed model for such challenging systems covering noncritical, as well as critical regions. In addition, to show the strength of the proposed crossover approach to describe properties other than LLE, molar heat capacities were investigated for the system of nitrobenzene + dodecane. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3094–3103, 2015     

Interaction between carbon dioxide and ionic liquids: Novel electrolyte candidates for safer Li-ion batteries

Ionic liquids (ILs) are typically molten salts at temperatures lower than 100 °C. Because of their thermal and electrochemical properties, they are good candidates to replace the state-of-the-art electrolytes used in today's Li-ion batteries. These commercial batteries often suffer from hazards caused by possible misuse. Elevated voltages and high temperatures usually lead to electrolyte degradation due to parasitic reactions with the electrodes leading to gas (mainly CO₂) evolution and may then eventually catch fire. Also, ILs are able to dissolve various gas molecules, making it possible to prevent a built-up of an overpressure inside the battery in case of undesired gas evolution. In this work, CO₂ storage in two different ionic liquids, i.e. PYR₁₄TFSI and [BMIm][BF4] is studied with regard to their respective Li-salt. Mixtures of ILs plus different concentrations of CO₂ were made. Phase diagrams of the pressure vs. temperature of the systems “liquid + vapour” to liquid transitions are drawn. Data points from 1.5 bar to 70 bar are collected with a Cailletet apparatus. Both of the ILs show good CO₂ dissolution ability; an increase of the temperature leads to an increase of the pressure needed to dissolve similar amounts of CO₂. The presence of a Li-salt hampers gas storage, particularly for PYR₁₄TFSI. A model based on the Langmuir adsorption theory is used to describe the solubility of the CO₂ in [BMIm][BF4]. The PYR₁₄TFSI IL does not obey the Langmuir-like solubility behaviour. Hence, the solubility then is described by the formation of discrete bonds between the CO₂ and the solvent, similarly to the concept of adspecies and surface sites.     

How indirect supportive digital help during and after solving physics problems can improve problem-solving abilities

This study investigates the effectiveness of computer-delivered hints in relation to problem-solving abilities in two alternative indirect instruction schemes. In one instruction scheme, hints are available to students immediately after they are given a new problem to solve as well as after they have completed the problem. In the other scheme, hints are only available as worked out problems after students have finished their solution. The instruction schemes are supplied by means of a web-based program, Physhint, which supports the development of strategic knowledge [Pol, H. J., Harskamp, E. G., & Suhre, C. J. M. (2008). The effect of the timing of instructional support in a computer-supported problem-solving program for students in secondary physics education. Computers in Human Behavior, 24, 1156–1178]. This program supports novice problem solvers while undertaking physics problems concerned with forces by providing hints structured in accordance with Schoenfeld’s episodes [Schoenfeld, A. H. (1992). Learning to think mathematically: Problem solving, metacognition, and sense making in mathematics. In D. A. Grouws (Ed.), Handbook of research on mathematics teaching (pp. 224–270). New York: McMillan Publishing].     

Solubility of Δ-tetrahydrocannabinol in supercritical carbon dioxide: Experiments and modeling

The solubility of Δ⁹-tetrahydrocannabinol (Δ⁹-THC) in supercritical carbon dioxide has been determined at 315, 327, 334 and 345 K and in the pressure range from 13.2 to 25.1 MPa using an analytical method with a quasi-flow apparatus. Prior to performing these measurements, the method was validated by measuring anthracene solubilities and comparing these with literature values. The molar solubility for Δ⁹-THC ranged from 0.20 to 2.95 × 10⁻⁴. The data were correlated using the Peng-Robinson equation of state in combination with quadratic mixing rules. Deviations between calculated results and the experimental data ranged from 4.1 to 13.3% absolute average relative deviation (AARD).     

Optimal placement of probes for dynamic pressure measurements in large-scale fluidized beds

Pressure data sampled at sufficiently high frequency (typically 20 Hz or higher) can yield much information about the hydrodynamic state of a fluidized bed. Since part of the pressure waves travelling through large (industrial) fluidized beds is only detectable in a limited area of the bed, pressure measurements need to be performed at several positions to cover the whole bed. We examine these local pressure waves (caused by, e.g., passing bubbles or coalescing bubbles) in a 0.80 m i.d. bubbling fluidized bed of Geldart B particles. Experiments and simulations are performed to determine the intensity decrease as local pressure waves propagate from their origin. A new spectral method is applied to determine the degree of coherence for pressure signals measured at two different positions in a fluidized bed. For a superficial gas velocity of 5u_mf, local pressure waves can be detected up to a radial distance of about 0.5 m from their origin; this distance is somewhat lower for lower gas velocities. This means that the radial spacing of pressure probes should not exceed 1 m. For large diameter beds with a bed height below 1.5 m, a set of probes at a single level and at several radial positions is sufficient to observe or monitor the dynamic state of the complete bed; the probes should preferably be placed at a height of 30% to 40% of the total bed height.