Comparison of H∞ and state-space induced quotient topologies on stable minimal systems

It is shown that on the set of w-input, p-output asymptotically stable, minimal, nth order systems that the H_∞ ^p·m and the R^N quoiient induced topologies coincide. Implications of this in frequency domain system identification are discussed     

PRELIMINARY PERFORMANCE TESTS OF A PULSED JET PLEATED PAPER CARTRIDGE FILTER SYSTEM

ABSTRACT

A pulsed jet pleated paper cartridge filter system was tested for particle removal efficiency and operating stability using agricultural limestone as the test dust. The test system consisted of 6 pleated paper filter units arranged in parallel, each unit having an effective filtration area of 18.1 square meters. The system was operated at constant pressure drops of 6.25, 7.50 and 8.75 kPa (2.5, 3.0 and 3.5 inches of water), with face velocities of 0.78 to 1.04 m/ min (2.5 to 3.4 feet per minute) and dust loadings ranging from 0.5 g/ m to 2.5 g/ m³. Penetration through the media appeared to be relatively independent of dust loading, and efficiencies were in the 99.95 + % range. Slightly lower efficiencies were found for particles having diameters of 0.3 to 1.0 micrometers. A measure of the redeposition of dust pulsed from the filter was required to describe the effects on the pulse rate caused by changes in system flow and pulsing set point. Increased redeposition was found to occur with increasing flow rate, causing an increase in the pulse rate required to maintain operation of the system at a pulsing set point. Overall, the reverse pulse jet pleated paper cartridge filter system displayed extremely high particle removal efficiency in a compact unit that operated with low differential pressure.     

LEARNING ABOUT COMPLEX SYSTEMS

Learning about complex systems is a fundamental engineering skill; it is often the first task of an engineer when faced with a complex problem in an unfamiliar context. The nature of learning is discussed. Contributions from cognitive psychology, artificial intelligence, management and sociology are drawn together to show that fundamentally, system learning is a matter of forming well-constructed system or conceptual models. The skills needed for this are discussed.     

Comparison of three‐dimensional analysis and stereological techniques for quantifying lithium‐ion battery electrode microstructures

Lithium‐ion battery performance is intrinsically linked to electrode microstructure. Quantitative measurement of key structural parameters of lithium‐ion battery electrode microstructures will enable optimization as well as motivate systematic numerical studies for the improvement of battery performance. With the rapid development of 3‐D imaging techniques, quantitative assessment of 3‐D microstructures from 2‐D image sections by stereological methods appears outmoded; however, in spite of the proliferation of tomographic imaging techniques, it remains significantly easier to obtain two‐dimensional (2‐D) data sets. In this study, stereological prediction and three‐dimensional (3‐D) analysis techniques for quantitative assessment of key geometric parameters for characterizing battery electrode microstructures are examined and compared. Lithium‐ion battery electrodes were imaged using synchrotron‐based X‐ray tomographic microscopy. For each electrode sample investigated, stereological analysis was performed on reconstructed 2‐D image sections generated from tomographic imaging, whereas direct 3‐D analysis was performed on reconstructed image volumes. The analysis showed that geometric parameter estimation using 2‐D image sections is bound to be associated with ambiguity and that volume‐based 3‐D characterization of nonconvex, irregular and interconnected particles can be used to more accurately quantify spatially‐dependent parameters, such as tortuosity and pore‐phase connectivity.     

Retrodiction as a tool for micromaser field measurements

We use retrodictive quantum theory to describe cavity field measurements by successive atomic detections in the micromaser. We calculate the state of the micromaser cavity field prior to detection of sequences of atoms in either the excited or ground state, for atoms that are initially prepared in the excited state. This provides the POM elements, which describe such sequences of measurements.     

Seal-Inlet Disturbance Boundary Condition Correlations for Rotordynamics Models,Part 2: Assessment

Nearly all seal rotordynamics models were forced to assume that the seal-inlet swirl velocity disturbance boundary condition components (W _1C and W _1S ) are zero. The companion (Part 1) paper employs an extensive parametric study to develop a complete set of widely applicable seal-inlet disturbance boundary condition correlations that will alleviate this shortcoming. The benefits of using the new seal-inlet boundary condition correlations were assessed by implementing them into a CFD-perturbation model. Two widely different test cases were employed. Case 1 is a test of the correlations for large upstream chambers using a simple liquid smooth-plain seal, and Case 2 is a test for small, as well as radial injection, upstream chambers using a complicated gas labyrinth seal. For both cases, consistently improved agreement with measurements was obtained for the options with non-zero W _1C and W _1S compared to the option with W _1C = W _1S = 0. Specifically, the correlation set using the W _1C -profile option gave a clearly better prediction of the effective damping and the cross-coupled stiffness than did the set using the W _1C -bulk option for the higher spin speed case of the challenging gas labyrinth. For the smooth-plain liquid seal case, the correlations with the W _1C -profile and W _1C -bulk options gave nearly the same level of agreement with measurements.     

α-, γ- and δ-Tocopherol Effects on Chlorophyll Photosensitized Oxidation of Soybean Oil

The effects of 0, 1.0, 2.0 and 4.0 (x 10^?3 M) α-, γ- or δ-tocopherol on chlorophyll b photosensitized oxidation of soybean oil in methylene chloride were studied by peroxide values and headspace oxygen. As concentrations of tocopherols increased, peroxide values decreased and headspace oxygen increased (P < 0.05). At 1.0 × 10^?3 M, α-tocopherol showed highest antioxidant effect, γ-tocopherol second and then δ-tocopherol. α- and -γ-Tocopherols had similar effects and δ-tocopherol had lower effect at 2.0 × 10^?3 M (P < 0.05). However, the three tocopherols were not different (P > 0.05) at 4.0 × 10^?3 M. α-Tocopherol quenched singlet oxygen to reduce the photosensitized oxidation of oil. The quenching rate constants of α-tocopherol were 2.7 × 10⁷M^?1sec^?1 by peroxide value and 2.6 × 10⁷ M^?1sec^?1 by headspace oxygen.     

Effect of Blanching and Drying on Pectin Constitutents and Related Characteristics of Dehydrated Peaches

The effects of sulfuring, blanching, dehydration, and storage (of dehydrated fruits), on the pectic constitutents and other characteristics of peaches are reported. Adequate blanching stabilized pectins of the dehydrated peaches so higher rehydration capacity and lower rehydration losses were observed after 5 min blanching. Increase in degradation was observed in nonblanched or 1.5 min heat-treated fruits, which resulted in lower rehydration capacity. A significant correlation was found between the contents of total pectin and protopectin fractions and the firmness or rehydration ratio of the peaches. Thus, pectin, one of the major cell-wall and intercellular tissue components, plays a significant role in determining the textural-structural characteristics of dehydrated fruits.