Fusion: Expensive and Taking Forever?

The road map of fusion power is compared to the development and deployment of other energy technologies. A generic deployment model is presented, which describes the fastest deployment (of any new technology) achievable with the constraint that the industrial capacity that needs to be built up must be continuous and should not overshoot the replacement market in the final, saturated state. It is shown that the development needs an ‘investment’ phase to build up industrial capacity which takes several decades, during which growth is typically exponential, but net energy production is negligible. During the exponential growth the cost is dominated by the capital investment, which allows for a simple comparison of different energy technologies. Fusion is at the start of the exponential growth phase, while still having significant uncertainties concerning its technical feasibility. In comparison to e.g. solar PV and wind, fusion is ‘late’, lagging by some 50 years. To follow the same rate of development that fission, wind and PV have shown, fusion will need to have 3 DEMO reactors operational in the early 2050s, followed by 10 generation one (GEN1) plants in the early 2060s and 100 GEN2 plants in the early 2070s. For the cost development to be comparable, an estimated allowable cost for one DEMO reactor is ~20 G$. While these indicative numbers for the pace and cost of development are very challenging but perhaps not unthinkable for fusion, this analysis does point towards an emphasis on ‘simpler and cheaper’ reactor designs.     

Influence of zeolite structure and chemistry on the electrical response and crystallization phase of poly(vinylidene fluoride)

Zeolites with framework types LTL, LTA, FAU, and MFI were synthesized and used as fillers to prepare PVDF/zeolite composites. The obtained composites showed structural and electrical dependence on the pore system and chemical content of the inorganic host. The larger polymer-zeolite electrostatic interactions of the Y and A zeolites lead the polymer to crystallize in the electroactive γ-phase, which in the case of the L zeolite is prevented due to the reduced interaction area. The solvent and water encapsulation ability of the zeolite as well as improve of the dielectric response of the composite is directly related to the Si/Al ratio, leading zeolites with lower Si/Al ratios to larger dielectric responses and encapsulation efficiencies in the composites. These effects show also some dependency on the dimensionality of the pore system; the zeolite L-containing 1D channels showing superior dielectric performance than the 3D pore system of zeolite Y.     

Changes in soil carbon stock after cropland conversion to grassland in Russian temperate zone: measurements versus model simulation

The collapse of Soviet Union in early 1990s led to abandonment of large area of arable land which is assumed to act as a carbon (C) sink. We studied the ability of two dynamic soil C models (Yasso07 and RothC) to predict changes in soil C content after cropland abandonment. The performance of the models was compared using the results of a long-term experiment in Pushchino, Moscow region (54°50′N, 37°35′E) in Russia. The experiment was divided in four combinations of fertilizer or mowing treatments on former cropland soil. The soil C content was determined in the year of establishment (1980) and thereafter in 1999 and 2004. The soil C stocks increased by about 1.5- to 1.8-fold during the study period. Both models predicted the overall change in soil C relatively well (modelling efficiency of Yasso07 and RothC were 0.60 and 0.73, respectively). According to the models, the soil gained on average 140–150 g C m^?2 year^?1 during the first 5 years after conversion of cropland to grassland. The C sequestration rate decreased to 40–50 g C m^?2 year^?1 after 20 years of land use change. The sequestration rates estimated in this study are comparable to the rates observed in other studies.     

Hyperbaric storage at and above room temperature of a highly perishable food

Hyperbaric storage at naturally variable room temperature (RT) conditions (18–21 °C) and above (30 °C) was evaluated as a possible new food preservation method, regardless of temperature. Preservation of watermelon juice (used as a case study of a highly perishable food) at RT and 5 °C at atmospheric pressure was compared to preservation under 100 MPa at RT. After 8 h of hyperbaric storage at 100 MPa, the initial microbial loads of the watermelon juice were reduced by 1 log unit for total aerobic mesophiles, and 1–2 log units for Enterobacteriaceae and yeasts and moulds, to levels of about 3 log units for the former and below the detection limit for the latter, and remained thereafter unchanged up to 60 h. Similar results were obtained at 30 °C at 100 MPa after 8 h. At atmospheric pressure at RT (24 h) and 30 °C (8 h), microbial levels were already above quantification limits and unacceptable for consumption. Furthermore, pressure attenuated the increase in titratable acidity verified at atmospheric pressure, but caused higher colour changes, especially a higher lightness and a lower browning degree. Post-hyperbaric storage at 5 °C revealed an extended shelf life, as an additional benefit of hyperbaric storage. These results show that hyperbaric storage is a very promising food preservation methodology.     

Nonlinear active noise control for headrest using virtual microphone control

In this paper, a feed-forward nonlinear active noise control algorithm is developed using the Filtered-S LMS (FSLMS) algorithm and virtual microphone control for an active headrest application. Virtual microphone control is implemented to attenuate noise at the ears of the headrest occupant using the physical microphones placed at remote locations. The proposed nonlinear virtual microphone control algorithm is verified in real-time in a headrest. Different nonlinear noise processes are studied and it is shown that in all cases, the FSLMS algorithm outperforms the FXLMS algorithm in controlling nonlinear primary noise at a virtual location.     

Design Principles for Cationic,Astrocyte-Targeted Probes

The brain's astrocytes play key roles in normal and pathological brain processes. Targeting small molecules to astrocytes in the presence of the many other cell types in the brain will provide useful tools for their visualization and manipulation. Herein, we explore the functional consequences of synthetic modifications to a recently described astrocyte marker composed of a bright rhodamine-based fluorophore and an astrocyte-targeting moiety. We altered the nature of the targeting moiety to probe the dependence of astrocyte targeting on hydrophobicity, charge, and pK_a when exposed to astrocytes and neurons isolated from the mouse cortex. We found that an overall molecular charge of +2 and a targeting moiety with a heterocyclic aromatic amine are important requirements for specific and robust astrocyte labeling. These results provide a basis for engineering astrocyte-targeted molecular tools with unique properties, including metabolite sensing or optogenetic control.